The class of low-density parity-check (LDPC) codes was introduced by Gallager in his thesis in 1961 [2]. Until the invention of turbo codes, they were largely neglected, but received a lot of interest lately, due to the possibility of designing LDPC codes within 0:0045 dB of the Shannon limit. We review in this project techniques used to analyze the performance of LDPC codes under a message-passing decoding algorithm, namely belief propagation (BP) [4][5]. This analysis gives us the tools to design good LDPC codes. We will flrst take the simpler example of transmission over the class of binary erasure channels (BEC). We will then see how it is possible to extend the results for the BEC to the much more general class of symmetric channels.
The class of low-density parity-check (LDPC) codes was introduced by Gallager in his thesis in 1961 [2]. Until the invention of turbo codes, they were largely neglected, but received a lot of interest lately, due to the possibility of designing LDPC codes within 0:0045 dB of the Shannon limit. We review in this project techniques used to analyze the performance of LDPC codes under a message-passing decoding algorithm, namely belief propagation (BP) [4][5]. This analysis gives us the tools to design good LDPC codes. We will flrst take the simpler example of transmission over the class of binary erasure channels (BEC). We will then see how it is possible to extend the results for the BEC to the much more general class of symmetric channels.
The discovery of turbo codes [5] and the subsequent rediscovery of low-density parity-check (LDPC) codes [9, 18] represent a major milestone in the field of coding theory. These two classes of codes can achieve realistic bit error rates, between 10−5 and 10−12, with signalto- noise ratios that are only slightly above the minimum possible for a given channel and code rate established by Shannon’s original capacity theorems. In this sense, these codes are said to be near-capacity-achieving codes and are sometimes considered to have solved (in the engineering sense, at least) the coding problem for the additive white Gaussian noise (AWGN) channel and its derivative channels. Perhaps the most important commonality between turbo and low-density parity-check codes is that they both utilize iterative message-passing decoding algorithms. For turbo codes, one uses the so-called turbo decoding algorithm, and for LDPC codes, both the sumproduct (SP) and the min-sum (MS) algorithms are used. The success of the various iterative message-passing algorithms is sometimes said to have ushered in a new era of “modern” coding theory in which the design emphasis has shifted from optimizing some code property, such as minimum distance, to optimizing the corresponding decoding structure of the code, such as the degree profile [24, 25], with respect to the behavior of a message-passing decoder. As successful as these codes and decoders have been in terms of application, there are several major questions that must be answered before a complete understanding of them can be achieved. The theoretical research in the area of capacity-achieving codes is focused on two main themes. The first theme is whether different types of capacity-achieving codes have common encoder and structural properties. In [17], it was claimed that turbo codes could be viewed as LDPC codes, but the relationship was not made explicit. More recently, P´erez, his student Jiang, and others [11, 16] developed a construction for the parity-check matrices of arbitrary turbo codes that clearly connects the components of the turbo encoder to the resulting structure of the parity-check matrix. From a more abstract perspective, turbo codes and low-density parity-check codes are examples of codes with long block lengths that exhibit the random structure inherent in Shannon’s original theorems. The second and more active research theme is the determination of the behavior of iterative message-passing decoding and the relationships between the various decoding algorithms. The dominant problem in this area is to understand the non-codeword decoder errors that occur in computer simulations of LDPC codes with iterative message-passing decoders. Motivated by empirical observations of the non-codeword outputs of LDPC decoders, the notion of stopping sets was first introduced by Forney, et al. [8] in 2001. Two years later, a formal definition of stopping sets was given by Changyan, et al. [6]. They demonstrated that the bit and block error probabilities of iteratively decoded LDPC codes on the binary erasure channel (BEC) can be determined exactly from the stopping sets of the parity-check matrix. (Here, a stopping set S is a subset of the set of variable nodes such that all neighboring check nodes of S are connected to S at least twice.)
In the past decade, there has been tremendous amount of research on the analysis and design of the Low-Density Parity-Check (LDPC) codes with belief propagation decoding over different types of Binary-Input Output-Symmetric Memoryless (BIOSM) channels. However, with the exception of the Binary Erasure Channel (BEC), analytical results on LDPC codes over such channels are limited and most results are based on numerical methods and optimization. In particular, systematic design of provably capacity achieving sequences of LDPC code ensembles over general class of BIOSM channels has remained a fundamental open problem. Such sequences have been designed only for the binary erasure channel (BEC). In this paper, we first prove some novel analytical properties of the LDPC code ensembles over BIOSM channels. In particular, we prove a result that generalizes the previously known stability condition over symmetric channels. This suggests that a modified version of the flatness condition, a property which has been shown to be critical for capacity achieving sequences over the BEC, can be used to devise capacity achieving sequences for general class of BIOSM channels. Based on this assumption, we propose a method which could result in the systematic design of such sequences over BIOSM channels. Numerical evidence is promising and provides a consistent convergence behavior to capacity over the considered BIOSM channels as the average check node degree increases.
In the first part of this thesis we are interested in the asymptotic performance analysis of Non-Binary Low-Density Parity-Check (NBLDPC) codes over the Binary Erasure Channel (BEC) decoded via the suboptimal Belief Propagation (BP) decoder as well as the optimal Maximum-A-Posteriori (MAP) decoder. Previously, NBLDPC codes defined with respect to a finite field have been studied in the literature. Unfortunately, for these codes the asymptotic analysis of the BP decoder in terms of density evolution is cumbersome since the involved densities "live" in a high dimensional space. To alleviate this problem, we introduce ensembles defined with respect to the general linear group. For these ensembles the density evolution equations can be written in a compact form. We compute thresholds for different alphabet sizes for various NBLDPC ensembles. Surprisingly, the threshold is not a monotonic function of the alphabet size. We also conjecture the stability condition for NBLDPC ensembles defined with respect to finite fields over any binary memoryless symmetric channel. We then consider the performance of NBLDPC codes under MAP decoding when transmission takes place over the BEC. Towards this goal, we generalize the concepts of the peeling decoder and stopping sets to NBLDPC codes. Using these concepts, we give a combinatorial characterization of decoding failures for NBLDPC codes decoded via the BP decoder. We use the decoding failure criterion and the density evolution analysis to compute the asymptotic residual degree distribution for NBLDPC codes. The rate of this residual ensemble gives the conditional entropy of the NBLDPC code. To compute the rate of the residual ensemble we generalize the criterion of [1] to the non-binary setting, which, when satisfied, guarantees that almost every code in the ensemble has a rate equal to the design rate. We observe that the Maxwell construction of [1], relating the performance of MAP and BP decoding via the Extended BP GEXIT (EBP GEXIT [2]) function, holds in the setting of NBLDPC codes. The weight and stopping set distribution of a code are related to its performance under the MAP and the BP decoder respectively. We first concentrate on the weight distribution of regular NBLDPC ensembles. We derive the average weight distribution of regular NBLDPC ensembles. Using this, we derive the average of equivalent binary weight distribution of regular NBLDPC ensembles. We show that as the alphabet size becomes larger the equivalent binary weight distribution converges to the weight distribution of Gallager's random parity check ensemble. The average weight distribution of binary LDPC ensembles has been extensively studied in the literature. Much less is known about the probability distribution of this quantity. In particular, the question of the concentration of the weight distribution around the ensemble average has not been addressed. We compute the variance of the weight distribution of binary regular LDPC ensembles. Using this and the second moment method we obtain bounds on the probability that a randomly chosen code has its weight distribution close to the ensemble average. We show that a large fraction of the total number of codes have their weight distribution close to the average. We apply the same technique for the stopping set distribution of binary regular LDPC ensembles. Again we show that a large fraction of total number of codes have their stopping set distribution close to the ensemble average. In the last part of this thesis we address the question of the existence of the EBP GEXIT function. The EBP GEXIT function plays a fundamental role in the asymptotic analysis of sparse graph codes. For transmission over the BEC using binary LDPC codes, the analytic properties of the EBP GEXIT function are relatively simple and well understood. The case of general BMS channel is much harder and even the existence of the curve is not known in general. We introduce some tools from non-linear analysis which can be useful to prove the existence of EXIT like curves in some cases. The main tool is the Krasnoselskii-Rabinowitz (KR) bifurcation theorem.
We present a general method for determining the capacity of low-density parity-check (LDPC) codes under message-passing decoding when used over any binary-input memoryless channel with discrete or continuous output alphabets. Transmitting at rates below this capacity, a randomly chosen element of the given ensemble will achieve an arbitrarily small target probability of error with a probability that approaches one exponentially fast in the length of the code. (By concatenating with an appropriate outer code one can achieve a probability of error that approaches zero exponentially fast in the length of the code with arbitrarily small loss in rate.) Conversely, transmitting at rates above this capacity the probability of error is bounded away from zero by a strictly positive constant which is independent of the length of the code and of the number of iterations performed. Our results are based on the observation that the concentration of the performance of the decoder around its average performance, as observed by Luby et al. in the case of a binary-symmetric channel and a binary message-passing algorithm, is a general phenomenon. For the particularly important case of belief-propagation decoders, we provide an effective algorithm to determine the corresponding capacity to any desired degree of accuracy. The ideas presented in this paper are broadly applicable and extensions of the general method to low-density parity-check codes over larger alphabets, turbo codes, and other concatenated coding schemes are outlined.
This dissertation presents new methods for the analysis, design and decoding of low-density parity-check (LDPC) codes. We start by studying the simplest class of decoders: the binary message-passing (BMP) decoders. We show that the optimum BMP decoder must satisfy certain symmetry and isotropy conditions, and prove that Gallager's Algorithm B is the optimum BMP algorithm. We use a generalization of extrinsic information transfer (EXIT) charts to formulate a linear program that leads to the design of highly efficient irregular LDPC codes for the BMP decoder. We extend this approach to the design of irregular LDPC codes for the additive white Gaussian noise channel. We introduce a "semi-Gaussian" approximation that very accurately predicts the behaviour of the decoder and permits code design over a wider range of rates and code parameters than in previous approaches. We then study the EXIT chart properties of the highest rate LDPC code which guarantees a certain convergence behaviour. We also introduce and analyze gear-shift decoding in which the decoder is permitted to select the decoding rule from among a predefined set. We show that this flexibility can give rise to significant reductions in decoding complexity. Finally, we show that binary LDPC codes can be combined with quadrature amplitude modulation to achieve near-capacity performance in a multitone system over frequency selective Gaussian channels.
Low-density parity-check (LDPC) codes are a class of linear block codes with implementable decoders, which provide near-capacity performance on a large set of data-transmission and data-storage channels. LDPC codes were invented by Gallager in his 1960 doctoral dissertation and were mostly ignored during the 35 years that followed. One notable exception is the important work of Tanner in 1981, in which Tanner generalized LDPC codes and introduced a graphical representation of LDPC codes, now called a Tanner graph. The study of LDPC codes was resurrected in the mid 1990s with the work of MacKay, Luby, and others [3–6], who noticed, apparently independently of Gallager's work, the advantages of linear block codes with sparse (low-density) parity-check matrices. This chapter introduces LDPC codes and creates a foundation for further study of LDPC codes in later chapters. We start with the fundamental representations of LDPC codes via parity-check matrices and Tanner graphs. We then learn about the decoding advantages of linear codes that possess sparse parity-check matrices. We will see that this sparseness characteristic makes the code amenable to various iterative decoding algorithms, which in many instances provide near optimal performance. Gallager of course recognized the decoding advantages of such low-density parity-check codes and he proposed a decoding algorithm for the BI-AWGNC and a few others for the BSC. These algorithms have received much scrutiny in the past decade, and are still being studied.