This thesis describes the construction of a dual species setup using fermionic 40K and bosonic 87Rb with the goal of cooling to ultracold temperatures and quantum degeneracy, and also perfoming precision collision experiments using a novel optical collider. The setup is composed of a dual species magneto-optical trap, with transfer to an ultrahigh vacuum science cell achieved using a mechanical transport scheme. Atoms are cooled to ultracold temperatures using forced radio frequency evaporation in a Ioffe-Pritchard style magnetic trap. The optical collider utilises the optical dipole force to trap a sample of ultracold atoms and accelerate them towards a target sample using an acousto-optic modulator. The process of cooling 87Rb atoms in the |F = 2, mF = 2> hyperfine state to Bose-Einstein condensation is described, as well as progress towards production of ultracold 40K. Design, implementation, and characterisation of the optical collider is provided, showing that it is a precision metrology device.
This thesis describes the construction of a dual species setup using fermionic 40K and bosonic 87Rb with the goal of cooling to ultracold temperatures and quantum degeneracy, and also perfoming precision collision experiments using a novel optical collider. The setup is composed of a dual species magneto-optical trap, with transfer to an ultrahigh vacuum science cell achieved using a mechanical transport scheme. Atoms are cooled to ultracold temperatures using forced radio frequency evaporation in a Ioffe-Pritchard style magnetic trap. The optical collider utilises the optical dipole force to trap a sample of ultracold atoms and accelerate them towards a target sample using an acousto-optic modulator. The process of cooling 87Rb atoms in the |F = 2, mF = 2> hyperfine state to Bose-Einstein condensation is described, as well as progress towards production of ultracold 40K. Design, implementation, and characterisation of the optical collider is provided, showing that it is a precision metrology device.
This thesis reports on the realisation and characterisation of a magnetically trapped ultracold atomic mixture of 87Rb and 133Cs in the F = 1, mF = −1 and F = 3, mF = −3 hyperfine states respectively. A compact two-species double magneto-optical trapping (MOT) apparatus is constructed in which a pyramid MOT acts to provide an independent flux of both atomic species for capture in the ultra-high vacuum science region of the apparatus. For the two-species science MOT in which this atom flux is captured, interspecies light assisted inelastic collisions are found to be a highly significant loss mechanism. A novel optical pressure spatial displacement technique is developed to minimise such losses, allowing near independent simultaneous loading of up to ' 8 × 108 87Rb and ' 3 × 108 133Cs atoms into an Ioffe-Pritchard ‘baseball ’ magnetic trap at magnetic bias fields of 166.70(6) and 165.50(6) G respectively. At the loaded 87Rb and 133Cs atom number densities of 1.78(6) × 109 and
Ultracold mixture experiments hold the promise of providing new insights into many-body quantum systems as well as ultracold chemistry and few-body phenomena. The work presented in this thesis dealt with the construction of a new apparatus for the production and study of ultracold gases of fermionic lithium-6 and bosonic caesium-133. These isotopes offer a wide tunability in their interaction strength, both in inter-species and intra-species collisions, through magnetic Feshbach resonances. Additionally, the widely different resonance frequencies of lithium and caesium enables independent control of each of the species. With this apparatus, Bose-Einstein condensates (BEC) containing 10^4 lithium Feshbach molecules are routinely produced. The cooling system for caesium has been developed in parallel and important steps towards producing ultracold caesium gases have been made. An optical dipole trap has been loaded with 2x10^6 caesium atoms and evaporative cooling towards quantum degeneracy can now be pursued. Laser, vacuum, magnetic and control systems have been developed for the implementation of this experiment. Light produced with this laser system was used to laser cool atoms, create conservative dipole traps as well as to provide means of imaging atomic clouds. Additionally, a system to produce strong magnetic fields of up to 1400 G has been established in order to exploit the wide tunability in the atomic interactions. Software that was developed for the computerised control system facilitated the coordination of all the components involved in the experimental sequence. Measurements and calculations that showcase the functionality of relevant parts of the setup are presented in this thesis. In this experiment, lithium and caesium atoms are obtained from a novel type of Zeeman slower and are loaded into a magneto-optical trap (MOT). The system is capable of doing this independently for each of the atomic species as well as sequentially. After the MOT has been loaded with atoms, they are transferred into a conservative far-off-resonance optical dipole trap. By adjusting the interactions between atoms and lowering the depth of the dipole trap, efficient evaporative cooling of lithium was carried out from which a molecular BEC was obtained. Time-of-flight measurements were used to characterise the condensate and study its expansion dynamics.
This thesis describes the progress achieved towards two goals. One is the construction of a compact magneto-optical trap (MOT) apparatus, used both as a standalone undergraduate laboratory experiment and as part of a public engagement demonstration of cold atom physics. The setup, which utilises a dichroic atomic vapour laser lock (DAVLL) system plus homemade sideband generation electronics, is capable of trapping and cooling up to 8x10⁷ ⁸⁵Rb atoms in a standard six-beam laser cooling scheme. The second goal is the loading of an ultracold ensemble of ⁸⁷Rb atoms into novel optical trap geometries using a phase-only liquid crystal spatial light modulator (LC SLM) for applications to atomtronics and quantum simulation. Details of a double vacuum chamber apparatus, designed to produce the first Bose-Einstein condensates (BECs) at St Andrews, are provided. The setup incorporates a hybrid trap evaporative cooling scheme towards quantum degeneracy and reliably produces BECs of 1.9 10⁵ ⁸⁷Rb atoms. Two computational techniques, developed during the course of this project, are presented with the aim of creating flexible, smooth holographic optical traps. The first method illuminates a single SLM with overlapped, co-propagating light beams of different wavelengths to create a composite optical pattern for atom manipulation. The second uses conjugate gradient minimisation to create exceptionally high fidelity light patterns in both amplitude and phase for light in the output plane. These techniques, combined with the implementation of a light sheet into the experimental setup, are used to trap atoms in both a ring profile and in a set of narrow waveguides connected with a tunnelling barrier.
This thesis describes the design, construction and optimisation of two compact \nsetups to produce ⁸⁷Rb Bose-Einstein condensates and dual ⁷Li-⁸⁷Rb Magneto-Optical Traps (MOTs). The motivation for compact systems is to have simplified \nsystems to cool the atoms. The first experimental setup is based on a single pyrex \nglass cell without the need for atom chips. Fast evaporation will be achieved in a hybrid trap comprising of a magnetic quadrupole trap and an optical dipole trap \ncreated by a Nd:YVO4 laser and with future plans of using a Spatial Light Modulator \n(SLM). To enhance an efficient and rapid evaporation, we have investigated Light-Induced Atomic Desorption (LIAD) to modulate the Rb partial pressure during the cooling and trapping stage. With this technique, a ⁸⁷Rb MOT of 7 x 10⁷ atoms was loaded by shining violet light from a LED source into the glass cell, whose walls are coated with rubidium atoms. The atoms were then cooled by optical molasses and then loaded into a magnetic trap where lifetime measurements demonstrated that LIAD improves on magnetically-trapped atoms loaded from constant background pressure by a factor of six. This is quite encouraging and opens the possibility to do a rapid evaporation. In a second experiment, we have designed a compact system based on a stainless steel chamber to trap either ⁷Li or ⁶Li atoms in a MOT loaded from alkali-metal dispensers without the need of conventional oven-Zeeman slower. This setup can also load ⁸⁷Rb atoms, allowing future projects to simultaneously produce degenerate quantum gases of bosonic ⁸⁷Rb and fermionic ⁶Li atoms.
The possibility to mould and control pure quantum systems has been offered by the experimental observation of Bose-Einstein condensation, a unique phase of matter when macroscopic quantities of a gas occupy the lowest quantum state. Techniques for creating these degenerate gases vary from laboratory to laboratory; each offers an unique test bed for studying quantum physics on a macroscopic scale. This thesis reports on the experimental design, construction and performance of an apparatus to create two-component 87Rb and 41K condensates for studies of non-equilibrium dynamics. This thesis is broken down as follows. In Chapter 1, a brief overview of the history and status of Bose Einstein condensates is presented, to affirm the motivation behind our work. Chapter 2 then presents the fundamental theory and background information to understand how and why our experiment was built. Chapter 3 describes the bulk of the work undertaken at the beginning of this thesis. In particular it describes the design choices, construction and performance of the vacuum, and laser and magnetic coil systems that are the key structural elements of the apparatus. In particular the vacuum system is a two-component differentially pumped system designed to optimise the number and lifetime of trapped atoms. Another integral element of the vacuum chamber is the science cell that enables high optical access, and close physical, access to an atomic cloud. As a result, high resolution imaging, ≃ 980 nm resolution at 780 nm is expected with a commercial microscope objective lens. The laser system is carefully de- signed to best combine and deliver the seven different optical frequencies required to simultaneously trap and manipulate 87Rb and 41K atoms. The magnetic coil system also represents an integral component of the apparatus, responsible for trapping and transferring atoms in a quadrupole field. One pair of coils is able to have their current direction reversed in order to generate bias fields. This allows access to Feshbach resonances between the two species, once they have been condensed. The second part of this thesis, Chapter 4, describes the performance of the apparatus when used to simultaneously trap 41K and 87Rb in the 3D magneto- optical trap (MOT) and produce a condensate of 87Rb atoms. In particular 1 × 109 rubidium atoms are routinely trapped in the 3D-MOT and transferred to the science chamber. In the hybrid trap the atoms are evaporatively cooled via microwave radiation, later to be used to sympathetically cool 41K, and loaded into a hybrid optical dipole and magnetic trap. At this stage ≃ 5 × 106 atoms are evaporatively cooled, by lowering the trap depth of the optical dipole beam, until a condensate of 87Rb is formed, containing 1.5 × 105 atoms. Additionally we are able to produce 3D MOTs of 41K simultaneously with the 87Rb 3D MOTs.
During my PhD, I participated in the full setup from scratch of an experiment that aims at cooling down and manipulating two fermionic alkaline atomic species, 6Li and 40K. Our goal is to study ultracold Fermi mixtures with mass imbalance, and to realize a flexible quantum analog simulator. In fact, for certain quantum many-body problems, such as high critical temperature superconductivity and frustrated anti-ferromagnetism, there is neither complete analytical nor numerical solution. Therefore, cold atoms systems, due to their purity and their high degree of tunability, even on their interaction itself, offer an interesting complementary point of view in the study of those phenomena. As far as the experimental setup is concerned, we built an ultra-high vacuum system, a complete and stable laser source for each species, as well as two performing atomic sources, a 6Li Zeeman slower and a 40K bidimensionnal magneto-optical trap; most of the optical and electrical quantities, as well as the imaging diagnostics, being computer controlled. Once those preliminary steps have been performed and optimized, we could obtain an efficient double magneto-optical trap, containing typically 5x10^9 atoms of 6Li and 8x10^9 atoms of 40K. In this configuration, we produced the first 6Li40K* heteronuclear molecules by photoassociation, for which we identified 70 rovibrational lines. In a second part, I describe in detail the magnetic transport of the atomic mixture, between the magneto-optical trap chamber and a science cell, located in an ultra-high vacuum region with large optical access. The complete setup, from its design to its experimental implementation and optimization, as well as the development of the program and the useful numerical diagnostics, are the heart of my work. The transport efficiency could be tested and optimized, allowing for an efficient transfer of the mixture in the science cell. Thus, after this thesis, all the experimental tools are operational in order to allow for evaporative cooling of the mixture in an optically plugged magnetic trap. Therefore, the field is open for quantum simulation and understanding of many-body problems in ultracold Fermi mixtures.