Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

The microstrip Superconducting QUantum Interference Device RF amplifier: Tuning and cascading

Michael Mueck, Marc-Olivier André, John L. Clarke, Jost Gail, Christoph Heiden

Published Jul 1, 1999• 2 citations
OpenAlex

Related papers

The Superconducting Quantum Interference Device (SQUID) microstrip amplifier: Computer models

Michael Meuck, John L. Clarke

Journal of Applied Physics•Jul 1, 2000•0 citations

Microstrip Superconducting Quantum Interference Devices for Quantum Information Science

De Feo, P Michael

•Jan 1, 2012•0 citations

Microstrip superconducting quantum interference device radio-frequency amplifier: Tuning and cascading

Michael Mück, Marc-Olivier André, John L. Clarke +2 more

The resonant frequency of an amplifier based on a low-temperature dc superconducting quantum interference device (SQUID) is tuned by varying the capacitance across the end of the input microstrip by means of a varactor diode. The resonant frequency can be reduced substantially, for example, from 190 to 110 MHz, while maintaining an on-resonance gain of 27–28 dB. Two microstrip SQUID amplifiers with the same resonant frequency are cascaded to achieve a gain of 33.5±1 dB at 386 MHz; with the SQUIDs tuned to different frequencies, the gain is 22 dB or higher from about 260 to 420 MHz.

Applied Physics Letters•Nov 29, 1999•37 citations

Superconducting Quantum Interference Devices: An Operational Guide for Rf-Biased Systems

Donald B. Sullivan

•Oct 28, 2017•20 citations

Radio-frequency amplifier based on a niobium dc superconducting quantum interference device with microstrip input coupling

Michael Mück, Marc-Olivier André, John L. Clarke +2 more

A dc superconducting quantum interference device (SQUID) was used to amplify radio-frequency signals that were coupled to one end of the microstrip formed by the input coil and the SQUID washer. For one device, the resonant frequency of the microstrip was increased from about 200 to 620 MHz by progressively shortening the length of the coil. At an operating temperature of 4.2 K, the gain was typically 18 dB, and the system noise temperature ranged from 0.5±0.3 K at 80 MHz to 3.0±0.7 K at 500 MHz.

Applied Physics Letters•Jun 1, 1998•99 citations

Radio-frequency amplifier with tenth-kelvin noise temperature based on a microstrip direct current superconducting quantum interference device

Marc-Olivier André, Michael Mück, John L. Clarke +2 more

A dc superconducting quantum interference device (SQUID) with a resonant microstrip input and a cooled heterostructure field-effect transistor as a postamplifier is used as a radio-frequency amplifier in the frequency range 90–500 MHz. At liquid He3 temperatures, gains of 24 and 20 dB and intrinsic noise temperatures of 0.06±0.02 and 0.12±0.10 K were achieved at 89.6 and 438 MHz, respectively. The system noise temperature at 438 MHz was also estimated from the Nyquist noise produced by a resonant circuit coupled to the input of the microstrip SQUID.

Applied Physics Letters•Aug 2, 1999•38 citations
The resonant frequency of an amplifier based on a low-temperature dc superconducting quantum interference device (SQUID) is tuned by varying the capacitance across the end of the input microstrip by means of a varactor diode. The resonant frequency can be reduced substantially, for example, from 190 to 110 MHz, while maintaining an on-resonance gain of 27–28 dB. Two microstrip SQUID amplifiers with the same resonant frequency are cascaded to achieve a gain of 33.5±1 dB at 386 MHz; with the SQUIDs tuned to different frequencies, the gain is 22 dB or higher from about 260 to 420 MHz.
A dc superconducting quantum interference device (SQUID) was used to amplify radio-frequency signals that were coupled to one end of the microstrip formed by the input coil and the SQUID washer. For one device, the resonant frequency of the microstrip was increased from about 200 to 620 MHz by progressively shortening the length of the coil. At an operating temperature of 4.2 K, the gain was typically 18 dB, and the system noise temperature ranged from 0.5±0.3 K at 80 MHz to 3.0±0.7 K at 500 MHz.
A dc superconducting quantum interference device (SQUID) with a resonant microstrip input and a cooled heterostructure field-effect transistor as a postamplifier is used as a radio-frequency amplifier in the frequency range 90–500 MHz. At liquid He3 temperatures, gains of 24 and 20 dB and intrinsic noise temperatures of 0.06±0.02 and 0.12±0.10 K were achieved at 89.6 and 438 MHz, respectively. The system noise temperature at 438 MHz was also estimated from the Nyquist noise produced by a resonant circuit coupled to the input of the microstrip SQUID.