Producing large samples of slow molecules from thermal-velocity ensembles is a formidable challenge. Here we employ a centrifugal force to produce a continuous molecular beam with a high flux at near-zero velocities. We demonstrate deceleration of three electrically guided molecular species, CH3F, CF3H, and CF3CCH, with input velocities of up to $200\text{ }\text{ }{\mathrm{m}\text{ }\mathrm{s}}^{\ensuremath{-}1}$ to obtain beams with velocities below $15\text{ }\text{ }{\mathrm{m}\text{ }\mathrm{s}}^{\ensuremath{-}1}$ and intensities of several ${10}^{9}\text{ }\text{ }{\mathrm{mm}}^{\ensuremath{-}2}\text{ }{\mathrm{s}}^{\ensuremath{-}1}$. The centrifuge decelerator is easy to operate and can, in principle, slow down any guidable particle. It has the potential to become a standard technique for continuous deceleration of molecules.
Intense beams of cold and slow molecules are produced by supersonic expansion out of a rapidly rotating nozzle, as first demonstrated by M. Gupta and D. Herschbach [J. Phys. Chem. A 103, 10670 (1999); 105, 1626 (2001)]. An improved setup is presented that is able to accelerate or decelerate cold atomic and molecular beams by up to 500 m/s. Technical improvements are discussed and beam parameters are characterized by detailed analysis of time-of-flight density distributions. The possibility of combining this beam source with electrostatic fields for guiding polar molecules is demonstrated.