Low power all-optical bistability in nematic liquid crystals

Ashley Lloyd, Brian S. Wherrett

Published Nov 17, 1988• 0 citations

Abstract

Optimisation studies of nonlinear narrow pass-band interference filters have concluded that the independent tailoring of finesse and cavity length made possible by removal of absorption from within the cavity can lead to a significant reduction in operating power levels. A metallic partial mirror at the rear of the cavity is thus used as both a reflector and an absorber, with thermal conduction into the spacer leading to optothermal bistability. This design allowed the construction of rigid cavities which have been used to demonstrate optical bistability with a number of liquid phase thermo-optic materials. >

Related papers

Microwatt optical switching and bistability in dyed nematic liquid crystals

Ashley Lloyd, Chang H. Wang, Brian S. Wherrett

The performance of optically bistable liquid crystal interference filters with extra-cavity metallic absorbers is contrasted with designs using intra-cavity dyes with which switching levels at 4 pW are recorded. The use of these devices in parallel processing applications is also considered, with the optical implementation of a "flip-flop" and results of a 15 x 15 element array switching presented.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIEDec 1, 19900 citations

Optical bistability in nematic liquid crystals

Shuchao Chen

Optical bistable behaviour of nematic liquid crystals in Fabry-Perot cavity has been discussed. The normal and abnormal bistable loops were also discussed. Considering thermal conductivity in F-P cavity, a theory to get very low critical switching power optical bistability was developed.

International Conference on Optoelectronic Science and Engineering '90Dec 4, 20170 citations

All-optical bistability in nematic liquid crystals at 20 μW power levels

Ashley Lloyd, Brian S. Wherrett

Optical switches at power levels as low as 14 μW, allowing bistable operation with compact disk laser systems, are reported in optimized cavities containing planar-aligned nematic liquid crystals.

Applied Physics LettersAug 8, 198820 citations

All-Optical Logic Elements For Optical Processing

Brian S. Wherrett, Yuk Tak Chow, David C. Hutchings +2 more

Theoretical and experimental studies aimed at low power all-optical bistability in thermal devices are described. Cavities containing semiconductors, liquid crystals and liquids have been investigated. Submilliwatt and laser-diode-induced switching is reported for metal cavities containing strongly thermo-optic liquid crystal material. Aspects of switching dynamics are described.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIESep 22, 19872 citations

All-Optical Bistability In Nematic Liquid Crystals At Microwatt Power Levels

Ashley Lloyd, C. H. Wang, Brian S. Wherrett

The temporal response and stability of all-optical switches at power levels down to 14µW are studied; cell design and optimisation are also considered for extension of this work to infrared wavelengths with experimental results presented for 1.3 μm.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIEDec 22, 19890 citations

Optical bistability using a nematic liquid crystal film in a Fabry-Perot cavity

I. C. Khoo, Richard J. F. Normandin, Vincent So

We have observed optical bistability in a Fabry-Perot cavity with a nematic liquid crystal film. Switching phenomenon was observed with a low power single-mode cw laser of about 300 mW.

Journal of Applied PhysicsNov 1, 198227 citations