A system suitable for studying interactions between ⁸⁷Rb Rydberg atoms and metal surfaces has been constructed. This thesis describes the design and construction of the apparatus, and some test results. Atoms in a vapor cell magneto-optical trap are transferred to a macroscopic Ioffe-Pritchard trap, where they will be RF evaporatively cooled and loaded into a magnetic microtrap (atom chip). Confinement of cold clouds at controllable distances (5–200 μm)} from a metal surface is possible. The effects of atom-surface interactions can be studied with Rydberg atom spectroscopy. \n \nSome functionality of the apparatus has been demonstrated. Approximately 1.5×10⁷ atoms were loaded into a mirror MOT, and about 6×10⁶ atoms were optically pumped to the |F=2, m_F=2> hyperfine ground state and confined in a macroscopic Ioffe-Pritchard trap. The temperature of the cloud in the trap was 42 ± 5 μK, and the 1/e lifetime is 1–1.5 s. Forced RF evaporation has been used to measure the magnetic field at the trap minimum, but RF evaporative cooling has not yet been demonstrated.A system suitable for studying interactions between ⁸⁷Rb Rydberg atoms and metal surfaces has been constructed. This thesis describes the design and construction of the apparatus, and some test results. Atoms in a vapor cell magneto-optical trap are transferred to a macroscopic Ioffe-Pritchard trap, where they will be RF evaporatively cooled and loaded into a magnetic microtrap (atom chip). Confinement of cold clouds at controllable distances (5–200 μm)} from a metal surface is possible. The effects of atom-surface interactions can be studied with Rydberg atom spectroscopy. \n \nSome functionality of the apparatus has been demonstrated. Approximately 1.5×10⁷ atoms were loaded into a mirror MOT, and about 6×10⁶ atoms were optically pumped to the |F=2, m_F=2> hyperfine ground state and confined in a macroscopic Ioffe-Pritchard trap. The temperature of the cloud in the trap was 42 ± 5 μK, and the 1/e lifetime is 1–1.5 s. Forced RF evaporation has been used to measure the magnetic field at the trap minimum, but RF evaporative cooling has not yet been demonstrated.

Sep 27, 20071 citation

Fabrication of an atom chip for Rydberg atom-metal surface interaction studies

Owen Cherry, Carter, J. D., Martin, J. D. D.

An atom chip has been fabricated for the study of interactions between $^{87}$ Rb Rydberg atoms and a Au surface. The chip tightly confines cold atoms by generating high magnetic field gradients using microfabricated current-carrying wires. These trapped atoms may be excited to Rydberg states at well-defined atom-surface distances. For the purpose of Rydberg atom-surface interaction studies, the chip has a thermally evaporated Au surface layer, separated from the underlying trapping wires by a planarizing polyimide dielectric. Special attention was paid to the edge roughness of the trapping wires, the planarization of the polyimide, and the grain structure of the Au surface.An atom chip has been fabricated for the study of interactions between $^{87}$Rb Rydberg atoms and a Au surface. The chip tightly confines cold atoms by generating high magnetic field gradients using microfabricated current-carrying wires. These trapped atoms may be excited to Rydberg states at well-defined atom-surface distances. For the purpose of Rydberg atom-surface interaction studies, the chip has a thermally evaporated Au surface layer, separated from the underlying trapping wires by a planarizing polyimide dielectric. Special attention was paid to the edge roughness of the trapping wires, the planarization of the polyimide, and the grain structure of the Au surface.

arXiv:2510.11902Oct 13, 20253 citations

Multi-layer atom chips for atom tunneling experiments near the chip surface

Ho‐Chiao Chuang, Evan A. Salim, Vladan Vuletić +2 more

Sensors and Actuators A PhysicalJan 19, 201013 citations

An atom chip has been fabricated for the study of interactions between

^{87}

Rb Rydberg atoms and a Au surface. The chip tightly confines cold atoms by generating high magnetic field gradients using microfabricated current-carrying wires. These trapped atoms may be excited to Rydberg states at well-defined atom-surface distances. For the purpose of Rydberg atom-surface interaction studies, the chip has a thermally evaporated Au surface layer, separated from the underlying trapping wires by a planarizing polyimide dielectric. Special attention was paid to the edge roughness of the trapping wires, the planarization of the polyimide, and the grain structure of the Au surface.