Recent technological advances have enabled the creation of nanomechanical structures with resonance frequencies exceeding 2 GHz. The oscillators are nanomachined single‐crystal structures of silicon, designed to provide two distinct sets of coupled elements with very low and very high frequencies. At higher temperatures — in the so‐called classical regime, the response to an applied driving force is continuous. At millikelvin temperatures these nanomechanical oscillators enter the quantum regime of mechanical motion with a manifestly discrete response to the applied drive. The observed discrete response most likely results from the onset of the quantum regime in these macroscopic nanomechanical oscillators. These new experiments offer exciting prospects for the studies of quantum measurement and quantum computation, involving macroscopic quantum mechanical oscillators.
Recent technological advances have enabled the creation of nanomechanical structures with resonance frequencies exceeding 2 GHz. The oscillators are nanomachined single‐crystal structures of silicon, designed to provide two distinct sets of coupled elements with very low and very high frequencies. At higher temperatures — in the so‐called classical regime, the response to an applied driving force is continuous. At millikelvin temperatures these nanomechanical oscillators enter the quantum regime of mechanical motion with a manifestly discrete response to the applied drive. The observed discrete response most likely results from the onset of the quantum regime in these macroscopic nanomechanical oscillators. These new experiments offer exciting prospects for the studies of quantum measurement and quantum computation, involving macroscopic quantum mechanical oscillators.
The application of quantum mechanics to macroscopic motion suggests many counterintuitive phenomena. While the quantum nature of the motion of individual atoms and molecules has long been successfully studied, an equivalent demonstration of the motion of a near-macroscopic structure remains a challenge in experimental physics. A nanomechanical resonator is an excellent system for such a study. It typically contains > 10 10 atoms, and it may be modeled in terms of macroscopic parameters such as bulk density and elasticity. Yet it behaves like a simple harmonic oscillator, with mass low enough and resonant frequency high enough for its quantum zero-point motion and single energy quanta to be experimentally accessible. In pursuit of quantum phenomena in a mechanical oscillator, two important goals are to prepare the oscillator in its quantum ground state, and to measure its position with a precision limited by the Heisenberg uncertainty principle. In this work we have demonstrated techniques that advance towards both of these goals. Our system comprises a 30 micron × 170 nm, 2.2 pg, 5.57 MHz nanomechanical resonator capacitively coupled to a 5 GHz superconducting microwave resonator. The microwave resonator and nanomechanical resonator are fabricated together onto a single silicon chip and measured in a dilution refrigerator at temperatures below 150 mK. At these temperatures the coupling of the motion to the thermal environment is very small, resulting in a very high mechanical Q, approaching ∼ 10 6 . By driving with a microwave pump signal, we observed sidebands generated by the mechanical motion and used these to measure the thermal motion of the resonator. Applying a pump tone red-detuned from the microwave resonance, we used the microwave field to damp the mechanical resonator, extracting energy and "cooling" the motion in a manner similar to optical cooling of trapped atoms. Starting from a mode temperature of ∼ 150 mK, we reached ∼ 40 mK by this "backaction cooling" technique, corresponding to an occupation factor only ∼ 150 times above the ground state of motion. We also determined the precision of our device in measurement of position. Quantum mechanics dictates that, in a continuous position measurement, the precision may be no better than the zero-point motion of the resonator. Increasing the coupling of the resonator to detector will eventually result in back-action driving of the motion, adding imprecision and enforcing this limit. We demonstrated that our system is capable of precisions approaching this limit, and identified the primary experimental factors preventing us from reaching it: noise added to the measurement by our amplifier, and excess dissipation appearing in our microwave resonator at high pump powers. Furthermore, by applying both red- and blue-detuned phase-coherent microwave pump signals, we demonstrated back-action evading (BAE) measurement sensitive to only a single quadrature of the motion. By avoiding the back-action driving in the measured quadrature, such a technique has the potential for precisions surpassing the limit of the zero-point motion. With this method, we achieved a measurement precision of ∼ 100 fm, or 4 times the quantum zero-point motion of the mechanical resonator. We found that the measured quadrature is insensitive to back-action driving by at least a factor of 82 relative to the unmeasured quadrature. We also identified a mechanical parametric amplification effect which arises during the BAE measurement. This effect sets limits on the BAE performance but also mechanically preamplifies the motion, resulting in a position resolution 1.3 times the zero-point motion. We discuss how to overcome the experimental limits set by amplifier noise, pump power and parametric amplification. These results serve to define the path forward for demonstrating truly quantum-limited measurement and non-classical states of motion in a nearly-macroscopic object.
Nano-electro-mechanical devices are now rapidly approaching the point where it will be possible to observe quantum mechanical behavior. However, for such behavior to be visible it is necessary to reduce the thermal motion of these devices down to temperatures in the millikelvin range. Here we consider the use of feedback control for this purpose. We analyze an experimentally realizable situation in which the position of the resonator is continuously monitored by a Single-Electron Transistor. Because the resonator is harmonic, it is possible to use a classical description of the measurement process, and we discuss both the quantum and classical descriptions. Because of this the optimal feedback algorithm can be calculated using classical control theory. We examine the quantum state of the controlled oscillator, and the achievable effective temperature. Our estimates indicate that with current experimental technology, feedback cooling is likely to bring the required milliKelvin temperatures within reach.
The coupling of nanomechanical resonators to controllable quantum systems represents a growing and promising area of research. Recent advances in this field have brought to astonishing results, such as the initialization of a mechanical resonator into its quantum ground state and even the preparation of non-classical coherent states of motion. These achievements open up appealing scenarios to quantum information technologies and to the exploration of the quantum-classical boundary. From an application perspective, such quantum-mechanical hybrid systems provide a versatile and attractive tool for a variety of precision measurements, like ultra-sensitive detection of force, mass, and displacement. \n \nQuantum control over a mechanical resonator, or, conversely, the prospect of using resonator's motion for probing quantum states, both involve some tight requirements. First of all, the interaction between the mechanics and its quantum partner has to be large on the scale of the decoherence rates of the coupled systems. In most cases, the coupling mechanism has to be activated by engineering the resonator with electrodes, magnets, or mirrors, or by using tailored laser fields. For this reason, the search for a strong coupling typically competes with the requirement of overcoming decoherence effects. In addition, for quantum effects to be observable, strong coupling has to be accompanied by the preparation of zero entropy initial states, for instance by cooling the resonator into its ground state of motion. \n \nThe motivation pursued by this thesis is to contribute to the inspiring field of hybrid systems by walking through each of the aforementioned directions. We in fact demonstrate a promising system in which optically active quantum dots, embedded in fully self-assembled core-shell nanowires, are coupled to the nanowire motion. Mechanical vibrations of the nanowire modulate the quantum dot emission energy over a broad range exceeding 14 meV, by means of deformation potential coupling. In our system, therefore, both the coupling mechanism and the quantum states themselves are intrinsic to the resonator's structure. Besides revealing unusually strong, such a built-in opto-mechanical interaction produces a hybrid system whose inherent coherence is unspoiled by any functionalization or external field and whose fabrication is simpler than top-down techniques. \n \nWe further demonstrate the use of a quantum point contact as a displacement transducer to measure and control the low-temperature thermal motion of a nearby micromechanical cantilever. We show that by including the QPC in a suitable feedback loop, we are able to cool the cantilever's fundamental mechanical mode down to the level of the measurement noise, achieving a squashing of the QPC noise at high gain. Due to its off-board design, our system is particularly versatile and suitable to force-sensing applications. Since the QPC transducer is sensitive to local modifications of the nearby electric field, our approach is in principle compatible with any nanoscale resonator, without requiring any functionalization to activate the coupling. By improving the performance of the QPC as a one-dimensional conductor and the cantilever-QPC capacitive coupling, our system has the potential to achieve quantum-limited displacement resolution and ground state cooling. We then report on some ongoing attempts to overcome the current limitations of our system and couple mechanical motion to different mesoscopic transport devices. \n \nWe remark that our demonstration of an as-grown quantum-dot-in-nanowire hybrid system opens up bright prospects on future experiments, as also testified by the very recent ferment of the scientific community around this topic. We find that the opto-mechanical coupling rate is not far from the nanowire mechanical frequency. This fact makes our system particularly promising for the quantum non-demolition readout of a quantum dot state through a measurement of the nanowire position. On the other hand, we show that the coupling can be further optimized, and the nanowire mechanical heating rate reduced, thus disclosing the captivating perspective of using quantum dots to probe and control the mechanical state of a nanowire. In this context, it would be important to investigate a possible spin-oscillator coupling in our system, given the long coherence time offered by a spin state in a quantum dot. The wide range of control over the quantum dots emission energy and the ability to tune two neighboring dots into resonance pave the way to mechanically induced emitter-emitter coupling. In addition, our monolithic opto-mechanical system constitutes a good candidate for recent proposals of a tripartite hybrid system, which would integrate an optical cavity, a quantum two-level system and a mechanical resonator. The intrinsically strong coupling between the quantum dots and the nanowire motion would enhance the interaction between the mechanics and the cavity field, leading for instance to efficient cooling of the resonator to the ground state. Finally, the quantum dot sensitivity to the nanowire resonant vibration could also support the use of our system as an integrated force probe or as a nanomechanical mass sensor. In other words, the results reported in this dissertation constitute not only a relevant proof-of-principle, moreover they open up intriguing challenges for future research.
Among the various nanoscale systems operating in the quantum limit, nanomechanical oscillators have emerged as particularly powerful platforms. They constitute highly sensitive sensors and can mediate interactions between light and localized quantum systems, playing a central role in various quantum information processing architectures. Due to their relatively large mass, they also serve as ideal platforms for investigating the transition between classical and quantum behavior. This thesis examines the dynamics of a nanomechanical oscillator coupled to a driven two-level system. The analysis focuses on the resolved sideband limit, where the twolevel system’s damping rate Γ is much smaller than the mechanical frequency ωm, and explores both the strong coupling (ωm ≫ g0 ≫ Γ) and ultra-strong coupling (g0 ∼ ωm ≫ Γ) regimes, where g0 denotes the coupling strength. These regimes enable coherent manipulation of the mechanical state while preserving its quantum coherence. Under blue-detuned driving of the two-level system and assuming low mechanical damping, the system exhibits a dynamical instability marked by the emergence of limit cycles in the mechanical oscillator. The onset of this regime is accompanied by pronounced fluctuations in the photon emission from the two-level system, indicated by a large deviation from Poissonian statistics. The phonon statistics display a similar behavior, offering an additional experimental signature. As the coupling strength approaches ωm, the mechanical oscillator reaches a steady state with non-classical feature. The phonon number distribution in this regime resembles that of Fock states, and the corresponding quasi-probability distribution in phase space displays negative regions, a signature of nonclassicality. A method is proposed to detect this non-classicality experimentally through measurements of the emitted light, from which the full quantum state of the coupled system can be reconstructed. The robustness of this approach is analyzed in the presence of realistic noise sources. The thesis further investigates the response of the system under two-tone driving. A tailored model is developed to describe this regime at strong coupling. When the driving frequencies are tuned to the first blue and red sidebands, the mechanical oscillator reaches a steady state exhibiting quadrature squeezing. In the case where both driving frequencies are red-detuned, the oscillator evolves into a superposition of coherent states, analogous to the behavior of a parametrically driven resonator. In both configurations, non-classical features become prominent when g0 approaches ωm. These results provide new insights into the generation and stabilization of non-classical and squeezed mechanical states. We outline feasible strategies for their detection, offering potential applications in hybrid quantum systems and foundational tests of quantum mechanics.
Cooled, low-loss nanomechanical resonators offer the prospect of directly observing the quantum dynamics of mesoscopic systems. However, the present state of the art requires cooling down to the milliKelvin regime in order to observe quantum effects. Here we present an active feedback strategy based on continuous observation of the resonator position for the purpose of obtaining these low temperatures. In addition, we apply this to an experimentally realizable configuration, where the position monitoring is carried out by a single-electron transistor. Our estimates indicate that with current technology this technique is likely to bring the required low temperatures within reach.
By coupling a single-electron transistor to a high-quality factor, 19.7-megahertz nanomechanical resonator, we demonstrate position detection approaching that set by the Heisenberg uncertainty principle limit. At millikelvin temperatures, position resolution a factor of 4.3 above the quantum limit is achieved and demonstrates the near-ideal performance of the single-electron transistor as a linear amplifier. We have observed the resonator's thermal motion at temperatures as low as 56 millikelvin, with quantum occupation factors of NTH = 58. The implications of this experiment reach from the ultimate limits of force microscopy to qubit readout for quantum information devices.