Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

High-efficiency interaction-free measurements using a stabilized Fabry-Perot cavity

Naoto Namekata, Shuichiro Inoue

Published Jun 21, 2004• 0 citations
Publisher

Abstract

Using a Fabry-Perot cavity with high transmittivity, it is possible to realize high-efficiency interaction-free measurements. In the scheme, it is required to stabilize the Fabry-Perot cavity when the measurements are performed. We have developed a stabilized Fabry-Perot cavity, and demonstrated the interaction-free measurements with the efficiency of 88 %.

DOI
10.1109/cleopr.2003.1277238

Related papers

High-efficiency interaction-free measurements using a stabilized Fabry–Pérot cavity

Naoto Namekata, Shuichiro Inoue

Using a Fabry–Perot cavity with high transmittivity, we have realized high-efficiency interaction-free measurements. The required stability of the cavity was achieved by employing the Pound-Drever feedback scheme without disturbing the measurement. For both an absorbing and a transparent object, the probability of correctly determining the presence or absence of the object (the efficiency of the interaction-free measurement) was found to be 88%.

Journal of Physics B Atomic Molecular and Optical Physics•Jul 28, 2006•8 citations

Efficient interaction-free measurements in a high-finesse interferometer

Tedros Tsegaye, E. Goobar, Anders Karlsson +3 more

Interaction-free measurements were realized using a high-finesse Fabry-P\'erot cavity as a measurement apparatus. A figure of merit based on the maximum likelihood estimation, which takes into account real experimental conditions, is used to analyze the efficiency of this measurement scheme. The probability of detecting the presence of an object within the cavity without any photons actually ``hitting'' the object was approximately 85%. The probability of asserting the absence of the object was approximately 75%. Assuming that the a priori probability of the object being present was 1/2, the likelihood of knowing whether the object was present or not was 80%. The obtained results and the limitations of our setup are discussed.

Physical Review A•May 1, 1998•56 citations

Experimental demonstration of an efficient interaction-free measurement in a Fabry-Perot interferometer

Tedros Tsegaye, E. Goobar, Anders Karlsson +1 more

Summary form only given.The purpose of an interaction-free measurement is to detect the presence of an object without letting any energy quanta be absorbed by the object. In this work we present interaction-free measurement results using a Fabry-Perot interferometer as a measurement apparatus. If the cavity of the interferometer is empty, an incoming photon will be transmitted through the interferometer. If an absorbent is placed between the mirrors, the photon will be reflected by the first mirror. By detecting which way the photon takes, we will gain information about the presence of the absorbent without losses/interaction. For a perfect measurement, the figure of merit will be equal to the mirror reflectivity R. Thus, in theory, one can approach the perfect interaction-free measurement simply by increasing R.

Conference on Lasers and Electro-Optics•Nov 27, 2002•0 citations

Highly Efficient "interaction Free" Measurements In A Fabry-perot Resonator

Anders Karlsson, Gunnar G. Bjork, E. Goobar +2 more

Quantum Electronics and Laser Science Conference•May 18, 1997•0 citations

Highly Efficient "interaction Free" Measurements In A Fabry-perot Resonator

�. Karlsson, Bjork, Goobar +2 more

Quantum Electronics and Laser Science Conference•Jan 1, 1997•0 citations

High finesse optical fiber cavities: optimal alignment and robust stabilization (Conference Presentation)

Lothar Ratschbacher, Jose Gallego, Sutapa Ghosh +4 more

Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications. Some of the most promising areas of application of these optical micro-resonators with high finesse and small mode volume are in the field of quantum communication and information. The resonator-enhanced light-matter interaction, for instance, provide basis for the realization of efficient optical interfaces between stationary matter-based quantum nodes and flying single-photon qubits. To date fiber Fabry-Perot cavities have been successfully applied in experiments interfacing single photons with a wide range of quantum systems, including cold atoms, ions and solid state emitters as well as quantum optomechanical experiments. Here we address some important practical questions that arise during the experimental implementation of high finesse fiber Fabry-Perot cavities: How can optimal fiber cavity alignment be achieved and how can the efficiency of coupling light from the optical fibers to the cavity mode and vice versa be characterized? How should optical fiber cavities be constructed and stabilized to fulfill their potential for miniaturization and integration into robust scientific and technological devices that can operate outside of dedicated laboratory environments in the future? The first two questions we answer with an analytic mode matching calculation that relates the alignment dependent fiber-to-cavity mode-matching efficiency to the easily measurable dip in the reflected light power at the cavity resonance. Our general analysis provides a simple recipe for the optimal alignment of fiber Fabry-Perot cavities and moreover for the first time explains the asymmetry in their reflective line shapes. The latter question we explore by investigating a novel, intrinsically rigid fiber cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. The performance of this novel approach is compared to a more traditional, piezomechanically-actuated resonator that is feedback stabilized to a reference laser based on the Pound-Drever-Hall locking technique. Finally, with the application of single photon interfacing in mind we discuss the issue of fiber-generated background photons in Fiber Fabry-Perot cavities. We believe that, due to their simplicity, compactness and robustness, rigid fiber cavities could be a promising solution for miniaturized, integratable and scalable cavity quantum electrodynamic devices and further applications of FFPC with similar requirements.

•Aug 3, 2016•0 citations
Using a Fabry-Perot cavity with high transmittivity, it is possible to realize high-efficiency interaction-free measurements. In the scheme, it is required to stabilize the Fabry-Perot cavity when the measurements are performed. We have developed a stabilized Fabry-Perot cavity, and demonstrated the interaction-free measurements with the efficiency of 88 %.
Interaction-free measurements were realized using a high-finesse Fabry-P\'erot cavity as a measurement apparatus. A figure of merit based on the maximum likelihood estimation, which takes into account real experimental conditions, is used to analyze the efficiency of this measurement scheme. The probability of detecting the presence of an object within the cavity without any photons actually ``hitting'' the object was approximately 85%. The probability of asserting the absence of the object was approximately 75%. Assuming that the a priori probability of the object being present was 1/2, the likelihood of knowing whether the object was present or not was 80%. The obtained results and the limitations of our setup are discussed.
Summary form only given.The purpose of an interaction-free measurement is to detect the presence of an object without letting any energy quanta be absorbed by the object. In this work we present interaction-free measurement results using a Fabry-Perot interferometer as a measurement apparatus. If the cavity of the interferometer is empty, an incoming photon will be transmitted through the interferometer. If an absorbent is placed between the mirrors, the photon will be reflected by the first mirror. By detecting which way the photon takes, we will gain information about the presence of the absorbent without losses/interaction. For a perfect measurement, the figure of merit will be equal to the mirror reflectivity R. Thus, in theory, one can approach the perfect interaction-free measurement simply by increasing R.
Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications. Some of the most promising areas of application of these optical micro-resonators with high finesse and small mode volume are in the field of quantum communication and information. The resonator-enhanced light-matter interaction, for instance, provide basis for the realization of efficient optical interfaces between stationary matter-based quantum nodes and flying single-photon qubits. To date fiber Fabry-Perot cavities have been successfully applied in experiments interfacing single photons with a wide range of quantum systems, including cold atoms, ions and solid state emitters as well as quantum optomechanical experiments. Here we address some important practical questions that arise during the experimental implementation of high finesse fiber Fabry-Perot cavities: How can optimal fiber cavity alignment be achieved and how can the efficiency of coupling light from the optical fibers to the cavity mode and vice versa be characterized? How should optical fiber cavities be constructed and stabilized to fulfill their potential for miniaturization and integration into robust scientific and technological devices that can operate outside of dedicated laboratory environments in the future? The first two questions we answer with an analytic mode matching calculation that relates the alignment dependent fiber-to-cavity mode-matching efficiency to the easily measurable dip in the reflected light power at the cavity resonance. Our general analysis provides a simple recipe for the optimal alignment of fiber Fabry-Perot cavities and moreover for the first time explains the asymmetry in their reflective line shapes. The latter question we explore by investigating a novel, intrinsically rigid fiber cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. The performance of this novel approach is compared to a more traditional, piezomechanically-actuated resonator that is feedback stabilized to a reference laser based on the Pound-Drever-Hall locking technique. Finally, with the application of single photon interfacing in mind we discuss the issue of fiber-generated background photons in Fiber Fabry-Perot cavities. We believe that, due to their simplicity, compactness and robustness, rigid fiber cavities could be a promising solution for miniaturized, integratable and scalable cavity quantum electrodynamic devices and further applications of FFPC with similar requirements.