Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Polarization-Insensitive Superconducting Nanowire Single-Photon Detectors

Shellee D. Dyer, Hiroki Takesue, Varun Boehm Verma, Robert D. Horansky, Richard P. Mirin, Sae Woo Nam

Published Jan 1, 2015• 0 citations
Publisher

Abstract

We report MoSi superconducting nanowire single-photon detectors (SNPDs) with low polarization sensitivity over a 120 nm wavelength range, covering the standard fiber telecom wavelengths. Our models indicate that this low polarization sensitivity is consistent with the design geometry.
DOI
10.1364/cleo_qels.2015.ff2a.4

Related papers

Demonstration of Polarization-Insensitive Superconducting Nanowire Single-Photon Detector With Si Compensation Layer

Ruiying Xu, Fan Zheng, Defeng Qin +10 more

Polarization sensitivity is an intrinsic characteristic of the superconducting nanowire single-photon detector (SNSPD). It is caused by the periodical meander structure of the SNSPD, and may severely limit the scope of the SNSPD's applications. In this study, we have designed and fabricated a SNSPD with much reduced polarization sensitivity, based on a previously published theoretical result that involves high refractive index compensation materials. Using a home-built broadband automatic measurement system, the device detection efficiencies of the fabricated SNSPD have been measured for wavelengths ranging from 1200 to 1700 nm. The measurement results show that the polarization sensitivity of the fabricated device is greatly reduced, with the device detection efficiencies at 1550 nm being 61% and 56% for cases of parallel and perpendicular polarizations, respectively. The measurement results are in good agreement with the numerical simulations.

Journal of Lightwave Technology•Sep 15, 2017•21 citations

Polarization-insensitive high-efficiency superconducting nanowire single-photon detector

xin xu, Yue Fei, Qi Chen +10 more

Superconducting nanowire single-photon detectors (SNSPDs) struggle to balance high system detection efficiency (SDE) and low polarization dependence. This work proposes a co-design of the NbN films, α -Si anti-reflection coating (ARC), and SiO 2 /Ta 2 O 5 distributed Bragg reflector (DBR) to reduce the polarization-dependent optical response of the nanowires. Simulations based on rigorous coupled-wave analysis (RCWA) and the finite-element method show absorptance above 99% for both transverse-electric (TE) and transverse-magnetic (TM) polarizations and absorptance above 90% over the wavelength range from 1530 to 1640 nm. Experimentally, the device achieves 97% SDE at 1530 nm (polarization sensitivity, PS = 1.1), PS < 1.3 over 1490–1640 nm, 39.5 ns recovery time, and 63.5 ps timing jitter. Retaining a conventional single-layer meander nanowire geometry, this design unifies high efficiency and polarization insensitivity, advancing SNSPD applications in quantum communications, free-space links, and single-photon imaging.

Optics Express•Oct 8, 2026•0 citations

Exceeding 95% system efficiency within the telecom C-band in superconducting nanowire single photon detectors

Dileep V. Reddy, Robert R. Nerem, Adriana E. Lita +3 more

We present a single-photon detector with system detection efficiencies exceeding 95% over the wavelength range 1520-1550 nm, with polarization sensitivities in the range of 1.02-1.08. The wavelength range is tunable over 200 nm via variation of the top-two dielectric layer thicknesses.

Conference on Lasers and Electro-Optics•Jan 1, 2019•15 citations

Fractal superconducting nanowire single-photon detectors with reduced polarization sensitivity

Xiaoming Chi, Kai Zou, Chao Gu +8 more

We demonstrate superconducting nanowire single-photon detectors (SNSPDs) based on a fractal design of the nanowires to reduce the polarization sensitivity of detection efficiency. We patterned niobium titanium nitride thin films into Peano curves with a linewidth of 100 nm and integrated the nanowires with optical microcavities to enhance their optical absorption. At a base temperature of 2.6 K, the fractal SNSPD exhibited a polarization-maximum device efficiency of 67% and a polarization-minimum device efficiency of 61% at a wavelength of 1550 nm. Therefore, the polarization sensitivity, defined as their ratio, was 1.1, lower than the polarization sensitivity of the SNSPDs in the meander design. The reduced polarization sensitivity of the detector could be maintained for higher-order spatial modes in multimode optical fibers and could tolerate misalignment between the optical mode and the detector. This fractal design is applicable to both amorphous and polycrystalline materials that are commonly used for making SNSPDs.

Optics Letters•Oct 8, 2018•47 citations

Superconducting nanowire single photon detector design with multispectral and polarization-sensitive performance

Xinyi Liu, Chaojie Wang, Xiyu Chen +1 more

Abstract The multispectral and polarization-sensitive detection of superconducting nanowire single photon detectors (SNSPDs) have been identified in applications, such as quantum information processing and polarimetric imaging systems. Distributed Bragg reflectors (DBRs) demonstrate exceptional wavelength-selective reflectivity, and subwavelength gratings (SWGs) exhibit the ability to separate different polarized light. In this paper, a multispectral and polarization-sensitive SNSPD design is proposed by combining DBRs and SWGs. In the design, the NbN nanowires are positioned on two DBR stacks with respective central wavelengths of 1400 nm and 930 nm, followed by integration of Si-Al composite gratings onto the surface layer. Numerical simulation results show that, setting the fill factor at 0.5, the polarization sensitivity of the SNSPD is ∼0.98, with absorption efficiencies of ∼95%, ∼92%, and ∼94% at wavelengths of 1064 nm, 1310 nm, and 1550 nm, respectively. The design proposed in this work could facilitate the development of high-performance SNSPDs, potentially advancing their applications in multispectral polarization imaging and quantum communication systems.

Physica Scripta•Nov 1, 2025•0 citations

Design of polarization-insensitive superconducting single photon detectors with high-index dielectrics

Luca Redaelli, Val Zwiller, Eva Monroy +1 more

Abstract In this paper, the design of superconducting-nanowire single-photon detectors which are insensitive to the polarization of the incident light is investigated. By using high-refractive-index dielectrics, the index mismatch between the nanowire and the surrounding media is reduced. This enhances the absorption of light with electric field vector perpendicular to the nanowire segments, which is generally hindered in these kind of detectors. Building on this principle and focusing on NbTiN nanowire devices, we present several easy-to-realize cavity architectures which allow high absorption efficiency (in excess of 90%) and polarization insensitivity simultaneously. Designs based on ultranarrow nanowires, for which the polarization sensitivity is much more marked, are also presented. Finally, we briefly discuss the specific advantages of this approach in the case of WSi or MoSi nanowires.

arXiv:1607.01273•Superconductor Science and Technology•Jan 9, 2017•27 citations
Polarization sensitivity is an intrinsic characteristic of the superconducting nanowire single-photon detector (SNSPD). It is caused by the periodical meander structure of the SNSPD, and may severely limit the scope of the SNSPD's applications. In this study, we have designed and fabricated a SNSPD with much reduced polarization sensitivity, based on a previously published theoretical result that involves high refractive index compensation materials. Using a home-built broadband automatic measurement system, the device detection efficiencies of the fabricated SNSPD have been measured for wavelengths ranging from 1200 to 1700 nm. The measurement results show that the polarization sensitivity of the fabricated device is greatly reduced, with the device detection efficiencies at 1550 nm being 61% and 56% for cases of parallel and perpendicular polarizations, respectively. The measurement results are in good agreement with the numerical simulations.
Superconducting nanowire single-photon detectors (SNSPDs) struggle to balance high system detection efficiency (SDE) and low polarization dependence. This work proposes a co-design of the NbN films, α -Si anti-reflection coating (ARC), and SiO 2 /Ta 2 O 5 distributed Bragg reflector (DBR) to reduce the polarization-dependent optical response of the nanowires. Simulations based on rigorous coupled-wave analysis (RCWA) and the finite-element method show absorptance above 99% for both transverse-electric (TE) and transverse-magnetic (TM) polarizations and absorptance above 90% over the wavelength range from 1530 to 1640 nm. Experimentally, the device achieves 97% SDE at 1530 nm (polarization sensitivity, PS = 1.1), PS < 1.3 over 1490–1640 nm, 39.5 ns recovery time, and 63.5 ps timing jitter. Retaining a conventional single-layer meander nanowire geometry, this design unifies high efficiency and polarization insensitivity, advancing SNSPD applications in quantum communications, free-space links, and single-photon imaging.
We demonstrate superconducting nanowire single-photon detectors (SNSPDs) based on a fractal design of the nanowires to reduce the polarization sensitivity of detection efficiency. We patterned niobium titanium nitride thin films into Peano curves with a linewidth of 100 nm and integrated the nanowires with optical microcavities to enhance their optical absorption. At a base temperature of 2.6 K, the fractal SNSPD exhibited a polarization-maximum device efficiency of 67% and a polarization-minimum device efficiency of 61% at a wavelength of 1550 nm. Therefore, the polarization sensitivity, defined as their ratio, was 1.1, lower than the polarization sensitivity of the SNSPDs in the meander design. The reduced polarization sensitivity of the detector could be maintained for higher-order spatial modes in multimode optical fibers and could tolerate misalignment between the optical mode and the detector. This fractal design is applicable to both amorphous and polycrystalline materials that are commonly used for making SNSPDs.
Abstract The multispectral and polarization-sensitive detection of superconducting nanowire single photon detectors (SNSPDs) have been identified in applications, such as quantum information processing and polarimetric imaging systems. Distributed Bragg reflectors (DBRs) demonstrate exceptional wavelength-selective reflectivity, and subwavelength gratings (SWGs) exhibit the ability to separate different polarized light. In this paper, a multispectral and polarization-sensitive SNSPD design is proposed by combining DBRs and SWGs. In the design, the NbN nanowires are positioned on two DBR stacks with respective central wavelengths of 1400 nm and 930 nm, followed by integration of Si-Al composite gratings onto the surface layer. Numerical simulation results show that, setting the fill factor at 0.5, the polarization sensitivity of the SNSPD is ∼0.98, with absorption efficiencies of ∼95%, ∼92%, and ∼94% at wavelengths of 1064 nm, 1310 nm, and 1550 nm, respectively. The design proposed in this work could facilitate the development of high-performance SNSPDs, potentially advancing their applications in multispectral polarization imaging and quantum communication systems.
Abstract In this paper, the design of superconducting-nanowire single-photon detectors which are insensitive to the polarization of the incident light is investigated. By using high-refractive-index dielectrics, the index mismatch between the nanowire and the surrounding media is reduced. This enhances the absorption of light with electric field vector perpendicular to the nanowire segments, which is generally hindered in these kind of detectors. Building on this principle and focusing on NbTiN nanowire devices, we present several easy-to-realize cavity architectures which allow high absorption efficiency (in excess of 90%) and polarization insensitivity simultaneously. Designs based on ultranarrow nanowires, for which the polarization sensitivity is much more marked, are also presented. Finally, we briefly discuss the specific advantages of this approach in the case of WSi or MoSi nanowires.