This Thesis contains details of the construction and characterisation of a compact apparatus for the cooling of ultracold atoms to quantum degeneracy, and their manipulation in flexible holographic optical traps. We have designed and built two iterations of this apparatus. The first version consists of a stainless steel single-cell vacuum chamber, in which we confine ⁸⁷Rb and ⁶Li or ⁷Li in a Magneto-Optical Trap. We characterise the alternative methods of pulsed atomic dispenser and Light Induced Atomic Desorption (LIAD) to rapidly vary the background pressure in the vacuum chamber with the view to enabling efficient evaporative cooling in the single chamber, loading MOTs of up to 10⁸ atoms using pulsed dispensers. The LIAD is found to be ineffective in loading large MOTs in this setup, while the pulsed dispensers method gradually increases the background pressure in the chamber over time. \nBased on the results of this first iteration, we designed and built a second single-chamber apparatus for cooling of ⁸⁷Rb to quantum degeneracy. The LIAD technique was used to successfully load MOTs containing 8x10⁷ atoms in this single pyrex cell with a rapidly-varying background pressure. The lifetime of an atomic cloud loaded from the MOT into a magnetic trap increased by a factor of 6 when LIAD was used. \nThe holographic optical traps for cold atoms are generated using a Spatial Light Modulator, and we present our novel method for improving the quality of holographic light patterns to the point where they are suitable for trapping ultracold atoms using a feedback algorithm. As demonstrations of this new capability, we show power-law optical traps which provide an efficient, reversible route to Bose-Einstein Condensation and a dynamic ring trap for the investigation of superfluidity in cold atoms.
This Thesis contains details of the construction and characterisation of a compact apparatus for the cooling of ultracold atoms to quantum degeneracy, and their manipulation in flexible holographic optical traps. We have designed and built two iterations of this apparatus. The first version consists of a stainless steel single-cell vacuum chamber, in which we confine ⁸⁷Rb and ⁶Li or ⁷Li in a Magneto-Optical Trap. We characterise the alternative methods of pulsed atomic dispenser and Light Induced Atomic Desorption (LIAD) to rapidly vary the background pressure in the vacuum chamber with the view to enabling efficient evaporative cooling in the single chamber, loading MOTs of up to 10⁸ atoms using pulsed dispensers. The LIAD is found to be ineffective in loading large MOTs in this setup, while the pulsed dispensers method gradually increases the background pressure in the chamber over time. \nBased on the results of this first iteration, we designed and built a second single-chamber apparatus for cooling of ⁸⁷Rb to quantum degeneracy. The LIAD technique was used to successfully load MOTs containing 8x10⁷ atoms in this single pyrex cell with a rapidly-varying background pressure. The lifetime of an atomic cloud loaded from the MOT into a magnetic trap increased by a factor of 6 when LIAD was used. \nThe holographic optical traps for cold atoms are generated using a Spatial Light Modulator, and we present our novel method for improving the quality of holographic light patterns to the point where they are suitable for trapping ultracold atoms using a feedback algorithm. As demonstrations of this new capability, we show power-law optical traps which provide an efficient, reversible route to Bose-Einstein Condensation and a dynamic ring trap for the investigation of superfluidity in cold atoms.
This thesis describes the progress achieved towards two goals. One is the construction of a compact magneto-optical trap (MOT) apparatus, used both as a standalone undergraduate laboratory experiment and as part of a public engagement demonstration of cold atom physics. The setup, which utilises a dichroic atomic vapour laser lock (DAVLL) system plus homemade sideband generation electronics, is capable of trapping and cooling up to 8x10⁷ ⁸⁵Rb atoms in a standard six-beam laser cooling scheme. The second goal is the loading of an ultracold ensemble of ⁸⁷Rb atoms into novel optical trap geometries using a phase-only liquid crystal spatial light modulator (LC SLM) for applications to atomtronics and quantum simulation. Details of a double vacuum chamber apparatus, designed to produce the first Bose-Einstein condensates (BECs) at St Andrews, are provided. The setup incorporates a hybrid trap evaporative cooling scheme towards quantum degeneracy and reliably produces BECs of 1.9 10⁵ ⁸⁷Rb atoms. Two computational techniques, developed during the course of this project, are presented with the aim of creating flexible, smooth holographic optical traps. The first method illuminates a single SLM with overlapped, co-propagating light beams of different wavelengths to create a composite optical pattern for atom manipulation. The second uses conjugate gradient minimisation to create exceptionally high fidelity light patterns in both amplitude and phase for light in the output plane. These techniques, combined with the implementation of a light sheet into the experimental setup, are used to trap atoms in both a ring profile and in a set of narrow waveguides connected with a tunnelling barrier.
This thesis describes the design, construction and optimisation of two compact \nsetups to produce ⁸⁷Rb Bose-Einstein condensates and dual ⁷Li-⁸⁷Rb Magneto-Optical Traps (MOTs). The motivation for compact systems is to have simplified \nsystems to cool the atoms. The first experimental setup is based on a single pyrex \nglass cell without the need for atom chips. Fast evaporation will be achieved in a hybrid trap comprising of a magnetic quadrupole trap and an optical dipole trap \ncreated by a Nd:YVO4 laser and with future plans of using a Spatial Light Modulator \n(SLM). To enhance an efficient and rapid evaporation, we have investigated Light-Induced Atomic Desorption (LIAD) to modulate the Rb partial pressure during the cooling and trapping stage. With this technique, a ⁸⁷Rb MOT of 7 x 10⁷ atoms was loaded by shining violet light from a LED source into the glass cell, whose walls are coated with rubidium atoms. The atoms were then cooled by optical molasses and then loaded into a magnetic trap where lifetime measurements demonstrated that LIAD improves on magnetically-trapped atoms loaded from constant background pressure by a factor of six. This is quite encouraging and opens the possibility to do a rapid evaporation. In a second experiment, we have designed a compact system based on a stainless steel chamber to trap either ⁷Li or ⁶Li atoms in a MOT loaded from alkali-metal dispensers without the need of conventional oven-Zeeman slower. This setup can also load ⁸⁷Rb atoms, allowing future projects to simultaneously produce degenerate quantum gases of bosonic ⁸⁷Rb and fermionic ⁶Li atoms.
This thesis details the design, construction and characterisation of an ultracold atoms system, developed in conjunction with a flexible optical trapping scheme which utilises a Liquid Crystal Spatial Light Modulator (LC SLM). The ultracold atoms system uses a hybrid trap formed of a quadrupole magnetic field and a focused far-detuned laser beam to form a Bose-Einstein Condensate of 2×10⁵ ⁸⁷Rb atoms. Cold atoms confined in several arbitrary optical trapping geometries are created by overlaying the LC SLM trap on to the hybrid trap, where a simple feedback process using the atomic distribution as a metric is shown to be capable of compensating for optical aberrations. Two novel methods for creating flexible optical traps with the LC SLM are also detailed, the first of which is a multi-wavelength technique which allows several wavelengths of light to be smoothly shaped and applied to the atoms. The second method uses a computationally-efficient minimisation algorithm to create light patterns which are constrained in both amplitude and phase, where the extra phase constraint was shown to be crucial for controlling propagation effects of the LC SLM trapping beam.
This thesis reports on the generation of MOT for laser cooling and trapping of Rubidium 87 atoms. Probe-pump technique have been used in Rb gas cell and doppler free absorption peaks has been observed. Peak at the crossover frequency will be locked for laser cooling and repump beams. This locked freuqency used in MOT to trap Rb atoms. The technique of optical molasses is used to cool the atoms and quadrupole magnetic field applied to confine or trap atoms at the center of MOT. Two chambers are constructed for 2D and 3D MOT with different pressure. Rb atoms loaded efficiently from the high flux cold atom beam generated in a compact 2D MOT. This is the first step of Bose Einstein Condensate (BEC). A performance of 2D MOT was tested by another main chamber of 3D MOT contains 3 pairs of counter-propagating beams. Over 5x10⁶ atoms trapped in a 3D MOT with loading rate of 1:8x10⁶ atoms/sec. This experiment provided an excellent starting point for future experiment on Rydberg atoms in dense ultracold quantum gases.
Ultracold mixture experiments hold the promise of providing new insights into many-body quantum systems as well as ultracold chemistry and few-body phenomena. The work presented in this thesis dealt with the construction of a new apparatus for the production and study of ultracold gases of fermionic lithium-6 and bosonic caesium-133. These isotopes offer a wide tunability in their interaction strength, both in inter-species and intra-species collisions, through magnetic Feshbach resonances. Additionally, the widely different resonance frequencies of lithium and caesium enables independent control of each of the species. With this apparatus, Bose-Einstein condensates (BEC) containing 10^4 lithium Feshbach molecules are routinely produced. The cooling system for caesium has been developed in parallel and important steps towards producing ultracold caesium gases have been made. An optical dipole trap has been loaded with 2x10^6 caesium atoms and evaporative cooling towards quantum degeneracy can now be pursued. Laser, vacuum, magnetic and control systems have been developed for the implementation of this experiment. Light produced with this laser system was used to laser cool atoms, create conservative dipole traps as well as to provide means of imaging atomic clouds. Additionally, a system to produce strong magnetic fields of up to 1400 G has been established in order to exploit the wide tunability in the atomic interactions. Software that was developed for the computerised control system facilitated the coordination of all the components involved in the experimental sequence. Measurements and calculations that showcase the functionality of relevant parts of the setup are presented in this thesis. In this experiment, lithium and caesium atoms are obtained from a novel type of Zeeman slower and are loaded into a magneto-optical trap (MOT). The system is capable of doing this independently for each of the atomic species as well as sequentially. After the MOT has been loaded with atoms, they are transferred into a conservative far-off-resonance optical dipole trap. By adjusting the interactions between atoms and lowering the depth of the dipole trap, efficient evaporative cooling of lithium was carried out from which a molecular BEC was obtained. Time-of-flight measurements were used to characterise the condensate and study its expansion dynamics.
The possibility to mould and control pure quantum systems has been offered by the experimental observation of Bose-Einstein condensation, a unique phase of matter when macroscopic quantities of a gas occupy the lowest quantum state. Techniques for creating these degenerate gases vary from laboratory to laboratory; each offers an unique test bed for studying quantum physics on a macroscopic scale. This thesis reports on the experimental design, construction and performance of an apparatus to create two-component 87Rb and 41K condensates for studies of non-equilibrium dynamics. This thesis is broken down as follows. In Chapter 1, a brief overview of the history and status of Bose Einstein condensates is presented, to affirm the motivation behind our work. Chapter 2 then presents the fundamental theory and background information to understand how and why our experiment was built. Chapter 3 describes the bulk of the work undertaken at the beginning of this thesis. In particular it describes the design choices, construction and performance of the vacuum, and laser and magnetic coil systems that are the key structural elements of the apparatus. In particular the vacuum system is a two-component differentially pumped system designed to optimise the number and lifetime of trapped atoms. Another integral element of the vacuum chamber is the science cell that enables high optical access, and close physical, access to an atomic cloud. As a result, high resolution imaging, ≃ 980 nm resolution at 780 nm is expected with a commercial microscope objective lens. The laser system is carefully de- signed to best combine and deliver the seven different optical frequencies required to simultaneously trap and manipulate 87Rb and 41K atoms. The magnetic coil system also represents an integral component of the apparatus, responsible for trapping and transferring atoms in a quadrupole field. One pair of coils is able to have their current direction reversed in order to generate bias fields. This allows access to Feshbach resonances between the two species, once they have been condensed. The second part of this thesis, Chapter 4, describes the performance of the apparatus when used to simultaneously trap 41K and 87Rb in the 3D magneto- optical trap (MOT) and produce a condensate of 87Rb atoms. In particular 1 × 109 rubidium atoms are routinely trapped in the 3D-MOT and transferred to the science chamber. In the hybrid trap the atoms are evaporatively cooled via microwave radiation, later to be used to sympathetically cool 41K, and loaded into a hybrid optical dipole and magnetic trap. At this stage ≃ 5 × 106 atoms are evaporatively cooled, by lowering the trap depth of the optical dipole beam, until a condensate of 87Rb is formed, containing 1.5 × 105 atoms. Additionally we are able to produce 3D MOTs of 41K simultaneously with the 87Rb 3D MOTs.