Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Wiley eBooks

Cryogenic Atom Chips

Gilles Nogues, Adrian Lupaşcu, Andreas Emmert, M. Brune, J. M. Raimond, S. Haroche

Published Feb 9, 2011• 5 citations
Publisher

Abstract

This chapter presents a review of the existing experiments on cryogenic chips. It shows that by which aspects they may be similar to or differ from equivalent room temperature setups. The chapter provides a few examples of new experiments that could be carried out with cryogenic chips. Superconducting atom chips differ in many aspects from the usual atom chip experiments at room temperature. The chapter focuses on the technical issues associated with building a setup that can be properly operated at cryogenic temperatures. It also shows that many properties of the superconducting film can affect the magnetic trap. The chapter demonstrates that it is possible to produce an ultra-cold atomic cloud close to superconducting films at low temperature. The coupling of superconducting micro- or nanostructures like Superconducting Quantum Interference Devices (SQUIDs) or coplanar waveguides to the ultra-cold cloud will certainly lead to very interesting results in the coming years. Controlled Vocabulary Terms cryogenic electronics; SQUIDs

DOI
10.1002/9783527633357.ch10

Related papers

Trapping and Manipulating Atoms on Chips

Jakob Reichel

This chapter introduces baseline knowledge that is used in most if not all atom chip experiments. It focuses on the design of magnetic traps from planar current distributions, and experimental aspects that are specific to atom chip experiments. Chips can be used to trap and manipulate atoms in many ways, using various interactions. The chapter reviews the types of potentials that have been demonstrated experimentally so far. It mainly focuses on magnetodynamic traps, and provides description of the most elementary magnetic trapping potentials- quadrupoles and Ioffe-Pritchard (IP) traps. The chapter analyzes a construction set of elementary wire layouts - such as the cross and the “H” - which enables to understand most of the layouts found on today’ s atom chips. The interaction energy between a neutral atom and a magnetic field is much weaker than the atom’ s thermal energy at room temperature, even in the many-Tesla fields of superconducting magnets. Controlled Vocabulary Terms current distribution; magnetic traps; quadrupole interactions

Wiley eBooks•Feb 9, 2011•9 citations

Vortex based atom traps and atomic electrometry on a superconducting atom chip

K. S. Chan

This thesis focuses on the realization of the magnetic micro-trap using the vortex current in a superconducting structure and the measurement of the electric fi eld from the adsorbates. Persistent currents are induced in the type-II superconductor - yttrium barium copper oxide (YBCO) to generate a magnetic potential for the ultracold atoms. Various programmable magnetic potentials are accomplished through the manipulation of the multiple magnetic eld pulses sequence used in imprinting the vortices. A special example is the achievement of self-sustaining trap which its trapping potential is formed without any requirement for external magnetic field. A demonstration of a single trap to a four traps is also shown, indicating a possible interferometry type of experiment using\nsuperconductors. Afterwards, a focus is shifted from the magnetic fi eld towards the electric fi eld of the superconducting atom chip. By using the Rydberg state of the rubidium\natom, we perform Rydberg spectroscopy to measure the electric field above the atom chip at room temperature and cryogenic temperature. In addition, to study the temperature\ndependent adsorption, temperature is varied from room to cryogenic temperature. Model based on Langmuir equation is simulated to explain the experimental result. This thesis\nconcludes with a summary and the future outlook.

•Jan 1, 2014•1 citation

Atom Chip Fabrication

R. Folman, Philipp Treutlein, Jörg Schmiedmayer

This chapter overviews atom chip fabrication by discussing the challenges to be faced when starting to conceive and fabricate chips for the manipulation of atoms. It describes the various ingredients and the corresponding fabrication methods. The chapter focuses not only on the currently most active and successful areas - current carrying wires and integrated photonics, but also focuses on more visionary approaches, examples being superconducting chips or the manipulation of atoms with real nanostructures such as carbon nanotubes. It discusses the material engineering and fabrication of atom chips for the manipulation of neutral atoms, but the same concept of robustness and versatility through miniaturization and integration can also be applied to manipulate molecules, ions, or trapped electrons. Metallic wires, electrodes, or permanent magnets are the most commonly used structures on an atom chip. In lithography, a pattern is transferred into a layer of resist on the chip surface. Controlled Vocabulary Terms electron beam lithography; metallic thin films; microfabrication

Wiley eBooks•Feb 9, 2011•10 citations

Realization of a Superconducting Atom Chip

Thomas Nirrengarten, A. Qarry, Cédric Roux +5 more

We have trapped rubidium atoms in the magnetic field produced by a superconducting atom chip operated at liquid helium temperatures. Up to $8.2\ifmmode\times\else\texttimes\fi{}{10}^{5}$ atoms are held in a Ioffe-Pritchard trap at a distance of $440\text{ }\text{ }\ensuremath{\mu}\mathrm{m}$ from the chip surface, with a temperature of $40\text{ }\text{ }\ensuremath{\mu}\mathrm{K}$. The trap lifetime reaches 115 s at low atomic densities. These results open the way to the exploration of atom-surface interactions and coherent atomic transport in a superconducting environment, whose properties are radically different from normal metals at room temperature.

arXiv:quant-ph/0610019•Physical Review Letters•Nov 17, 2006•112 citations

Optically tailored magnetic potentials for ultracold atoms based on superconducting vortices

Baw Swe. Phyo

Atom chips are micro-fabricated devices which create versatile magnetic potentials for trapping, cooling and controlling ensembles of ultra-cold atoms. Advancing from the typical atom chips, currents from superconducting vortices are used to trap and manipulate the ultra-cold atoms in our experiments. The superconducting vortex traps can be configured by controlling strength and pulse time of external magnetic fields together with bias fields. In order to fully utilize reconfigurability, superconducting vortices are optically manipulated with laser light to generate desired vortex patterns with this tailored trapping potentials for ultra-cold atoms are created. We have carried out heat diffusion simulations of laser patterns and characterized laser power and pulse time to effectively configure the desired vortex potentials. We have also successfully manipulated vortex matter optically to create arbitrary vortex patterns and ring potentials for cold atoms to utilize in quantum simulations and on-chip matter wave interferometry applications. Moreover, cold atoms could be used as a sensitive probe to examine magnetic field distribution of the superconducting vortices and we have used this technique to experimentally verify the resulting magnetic potentials of superconducting vortices after optical manipulation. v First of all, I would like to express my heartfelt gratitude and appreciation to my teacher and mentor, Prof.

•Jan 1, 2019•0 citations

Superconducting Atom Chips

M. Siercke, K. S. Chan, B. Zhang +2 more

We investigate superconducting chip structures for trapping and manipulating atoms. These structures are based on the average magnetic field of vortices induced in a type-II superconducting thin film. This magnetic field is the critical ingredient of the demonstrated vortex-based atom trap, which operate without transport current. We employ the hysteretic behavior of a superconducting thin film in the remanent state to generate different traps and flexible magnetic potentials for ultra-cold atoms. The experimental realization can be described by the Bean’s critical-state method to model the vortex field through mesoscopic super currents induced in the thin strip. Various vortex patterns can be obtained by programming different loading-field and transport current sequences. Furthermore we will discuss the expected enhanced lifetime of atoms trapped close to a superconducting surface in comparison with a metallic surface.

•Jan 1, 2011•0 citations
This chapter presents a review of the existing experiments on cryogenic chips. It shows that by which aspects they may be similar to or differ from equivalent room temperature setups. The chapter provides a few examples of new experiments that could be carried out with cryogenic chips. Superconducting atom chips differ in many aspects from the usual atom chip experiments at room temperature. The chapter focuses on the technical issues associated with building a setup that can be properly operated at cryogenic temperatures. It also shows that many properties of the superconducting film can affect the magnetic trap. The chapter demonstrates that it is possible to produce an ultra-cold atomic cloud close to superconducting films at low temperature. The coupling of superconducting micro- or nanostructures like Superconducting Quantum Interference Devices (SQUIDs) or coplanar waveguides to the ultra-cold cloud will certainly lead to very interesting results in the coming years. Controlled Vocabulary Terms cryogenic electronics; SQUIDs
This chapter introduces baseline knowledge that is used in most if not all atom chip experiments. It focuses on the design of magnetic traps from planar current distributions, and experimental aspects that are specific to atom chip experiments. Chips can be used to trap and manipulate atoms in many ways, using various interactions. The chapter reviews the types of potentials that have been demonstrated experimentally so far. It mainly focuses on magnetodynamic traps, and provides description of the most elementary magnetic trapping potentials- quadrupoles and Ioffe-Pritchard (IP) traps. The chapter analyzes a construction set of elementary wire layouts - such as the cross and the “H” - which enables to understand most of the layouts found on today’ s atom chips. The interaction energy between a neutral atom and a magnetic field is much weaker than the atom’ s thermal energy at room temperature, even in the many-Tesla fields of superconducting magnets. Controlled Vocabulary Terms current distribution; magnetic traps; quadrupole interactions
This thesis focuses on the realization of the magnetic micro-trap using the vortex current in a superconducting structure and the measurement of the electric fi eld from the adsorbates. Persistent currents are induced in the type-II superconductor - yttrium barium copper oxide (YBCO) to generate a magnetic potential for the ultracold atoms. Various programmable magnetic potentials are accomplished through the manipulation of the multiple magnetic eld pulses sequence used in imprinting the vortices. A special example is the achievement of self-sustaining trap which its trapping potential is formed without any requirement for external magnetic field. A demonstration of a single trap to a four traps is also shown, indicating a possible interferometry type of experiment using\nsuperconductors. Afterwards, a focus is shifted from the magnetic fi eld towards the electric fi eld of the superconducting atom chip. By using the Rydberg state of the rubidium\natom, we perform Rydberg spectroscopy to measure the electric field above the atom chip at room temperature and cryogenic temperature. In addition, to study the temperature\ndependent adsorption, temperature is varied from room to cryogenic temperature. Model based on Langmuir equation is simulated to explain the experimental result. This thesis\nconcludes with a summary and the future outlook.
This chapter overviews atom chip fabrication by discussing the challenges to be faced when starting to conceive and fabricate chips for the manipulation of atoms. It describes the various ingredients and the corresponding fabrication methods. The chapter focuses not only on the currently most active and successful areas - current carrying wires and integrated photonics, but also focuses on more visionary approaches, examples being superconducting chips or the manipulation of atoms with real nanostructures such as carbon nanotubes. It discusses the material engineering and fabrication of atom chips for the manipulation of neutral atoms, but the same concept of robustness and versatility through miniaturization and integration can also be applied to manipulate molecules, ions, or trapped electrons. Metallic wires, electrodes, or permanent magnets are the most commonly used structures on an atom chip. In lithography, a pattern is transferred into a layer of resist on the chip surface. Controlled Vocabulary Terms electron beam lithography; metallic thin films; microfabrication
We have trapped rubidium atoms in the magnetic field produced by a superconducting atom chip operated at liquid helium temperatures. Up to $8.2\ifmmode\times\else\texttimes\fi{}{10}^{5}$ atoms are held in a Ioffe-Pritchard trap at a distance of $440\text{ }\text{ }\ensuremath{\mu}\mathrm{m}$ from the chip surface, with a temperature of $40\text{ }\text{ }\ensuremath{\mu}\mathrm{K}$. The trap lifetime reaches 115 s at low atomic densities. These results open the way to the exploration of atom-surface interactions and coherent atomic transport in a superconducting environment, whose properties are radically different from normal metals at room temperature.
Atom chips are micro-fabricated devices which create versatile magnetic potentials for trapping, cooling and controlling ensembles of ultra-cold atoms. Advancing from the typical atom chips, currents from superconducting vortices are used to trap and manipulate the ultra-cold atoms in our experiments. The superconducting vortex traps can be configured by controlling strength and pulse time of external magnetic fields together with bias fields. In order to fully utilize reconfigurability, superconducting vortices are optically manipulated with laser light to generate desired vortex patterns with this tailored trapping potentials for ultra-cold atoms are created. We have carried out heat diffusion simulations of laser patterns and characterized laser power and pulse time to effectively configure the desired vortex potentials. We have also successfully manipulated vortex matter optically to create arbitrary vortex patterns and ring potentials for cold atoms to utilize in quantum simulations and on-chip matter wave interferometry applications. Moreover, cold atoms could be used as a sensitive probe to examine magnetic field distribution of the superconducting vortices and we have used this technique to experimentally verify the resulting magnetic potentials of superconducting vortices after optical manipulation. v First of all, I would like to express my heartfelt gratitude and appreciation to my teacher and mentor, Prof.
We investigate superconducting chip structures for trapping and manipulating atoms. These structures are based on the average magnetic field of vortices induced in a type-II superconducting thin film. This magnetic field is the critical ingredient of the demonstrated vortex-based atom trap, which operate without transport current. We employ the hysteretic behavior of a superconducting thin film in the remanent state to generate different traps and flexible magnetic potentials for ultra-cold atoms. The experimental realization can be described by the Bean’s critical-state method to model the vortex field through mesoscopic super currents induced in the thin strip. Various vortex patterns can be obtained by programming different loading-field and transport current sequences. Furthermore we will discuss the expected enhanced lifetime of atoms trapped close to a superconducting surface in comparison with a metallic surface.