Much of the theory of quantum information science has originally been developed in the realm of quantum bits and trits, so for finite-dimensional quantum systems. This chapter looks at the situation in the finite-dimensional case and then describes states and operations for infinite-dimensional quantum systems. Such infinite-dimensional (bosonic) quantum systems have canonical coordinates corresponding to position and momentum. These observables do not have eigenvalues, but a continuous spectrum; hence, the term “continuous-variable systems” has been coined to describe the situation. A class of non-Gaussian states plays a central role in quantum optical systems. Gaussian states play a central role in continuous-variable systems, so in quantum systems with canonical coordinates. A more general class of Gaussian operations is given by the Gaussian channels. Such Gaussian channels are models for optical fibers as noisy or lossy transmission lines.
Much of the theory of quantum information science has originally been developed in the realm of quantum bits and trits, so for finite-dimensional quantum systems. This chapter looks at the situation in the finite-dimensional case and then describes states and operations for infinite-dimensional quantum systems. Such infinite-dimensional (bosonic) quantum systems have canonical coordinates corresponding to position and momentum. These observables do not have eigenvalues, but a continuous spectrum; hence, the term “continuous-variable systems” has been coined to describe the situation. A class of non-Gaussian states plays a central role in quantum optical systems. Gaussian states play a central role in continuous-variable systems, so in quantum systems with canonical coordinates. A more general class of Gaussian operations is given by the Gaussian channels. Such Gaussian channels are models for optical fibers as noisy or lossy transmission lines.
Quantum continuous variable systems are quantum systems obeying the canonical commutation relations. As we have seen in the previous chapter, such systems always require the adoption of infinite-dimensional Hilbert spaces, even when a finite number of degrees of freedom is considered. Besides making their dynamics potentially intractable, this fact also implies that the study of properties related to the information and correlation content of continuous variable systems turns out to be particularly difficult. A widely known way to make continuous variable systems more tractable is to consider the restriction to Gaussian states. Already well trodden in older research on quantum optics, the study of Gaussian systems has more recently become a central theme of continuous variable quantum information. If open quantum systems, coupled to an external environment, are considered, the Gaussian regime applies when the system couples linearly to its environment and when system and environment are governed by Hamiltonians which are at most quadratic in the canonical operators (or, equivalently, when the overall Hamiltonian of system and environment is at most quadratic). These conditions may seem rather restrictive but, as we shall point out in the course of the book, are actually ordinarily met by a vast number of existing experimental set-ups in the areas of quantum optics, trapped ions, optomechanics, atomic ensembles and certain superconducting degrees of freedom (all of these platforms are reviewed in Chapter 9 ). What we will refer to as Gaussian measurements – POVMs that preserve the Gaussian character of initial states – are also customarily carried out with comparatively high efficiency, while the description of quantum noise can be incorporated seamlessly into the Gaussian picture. What is perhaps even more important to note is that the restriction to the Gaussian realm, while not exhaustive of the full wealth of dynamics and situations allowed in the whole Hilbert space, still lets one include most of the processes relevant to quantum technologies. Squeezing, whereby certain canonical quadratures have uncertainties below the vacuum state noise, and can hence be used in precision measurements, quantum entanglement, and cooling, where the entropy is drained out of a system in order to reach a pure quantum state and thus initialise information protocols or low noise experiments, may all be described within the Gaussian regime. Within the quantum information discourse, the Gaussian restriction has been often criticised on the grounds that no real genuinely quantum effects can ever be observed without leaving it at some point, since the statistics obtained from Gaussian states through Gaussian measurements can be reproduced by classical probability distributions. While technically correct, the reader should be reminded that such critiques often disregard the fact that the object described by a Gaussian state does entail a genuinely quantum description in a Hilbert space. Hence, for instance, the preparation of a pure Gaussian quantum state is the preparation of a pure vector of the Hilbert space. Likewise, a highly squeezed Gaussian state prepared for a metrological protocol is a state with very low noise in a certain physical observable, regardless of whether it can be mimicked by a classical distribution or not. The testing and exploitation of quantum non-locality (stronger than classical correlations that imply the presence of quantum entanglement) with Gaussian states does instead require a departure from Gaussian measurements. However, as we will see, certain non-Gaussian measurements are customarily implemented with current technology, and it is hence still relevant to study in detail the creation of such a resource for Gaussian states. This chapter will introduce Gaussian states from a somewhat unusual angle: as ground and thermal states of at most second-order Hamiltonians. Our treatment will highlight the privileged role played by quadratic canonical ( i.e. , ‘symplectic’) transformations in this context, which we will take care to describe in full generality, and will hinge on the reduction of Gaussian states into their normal modes, which allows for their systematic diagonalisation. We will then proceed to explore an equivalent characterisation in terms of statistical moments of the canonical operators, and to introduce the implications of non-commutativity on such statistics in the form of the Robertson–Schrödinger uncertainty relation.
This thesis deals with the study of quantum communication protocols with Continuous Variable (CV) systems. Continuous Variable systems are those described by canonical conjugated coordinates x and p endowed with infinite dimensional Hilbert spaces, thus involving a complex mathematical structure. A special class of CV states, are the so-called Gaussian states. With them, it has been possible to implement certain quantum tasks as quantum teleportation, quantum cryptography and quantum computation with fantastic experimental success. The importance of Gaussian states is two-fold; firstly, its structural mathematical description makes them much more amenable than any other CV system. Secondly, its production, manipulation and detection with current optical technology can be done with a very high degree of accuracy and control. Nevertheless, it is known that in spite of their exceptional role within the space of all Continuous Variable states, in fact, Gaussian states are not always the best candidates to perform quantum information tasks. Thus non-Gaussian states emerge as potentially good candidates for communication and computation purposes.
Quantum continuous variable systems are quantum systems obeying the canonical commutation relations. The testing and exploitation of quantum non-locality (stronger than classical correlations that imply the presence of quantum entanglement) with Gaussian states does instead require a departure from Gaussian measurements. Certain non-Gaussian measurements are customarily implemented with current technology, and it is hence still relevant to study in detail the creation of such a resource for Gaussian states. This chapter introduces Gaussian states from a somewhat unusual angle: as ground and thermal states of at most second-order Hamiltonians. The treatment highlights the privileged role played by quadratic canonical i.e '., symplectic' transformations in this context, and hinges on the reduction of Gaussian states into their normal modes, which allows for their systematic diagonalisation. It also discusses another equivalent parametrisation of a generic Gaussian state, deriving a more direct rendition of the spectrum of a Gaussian state in terms of observable parameters.
Observables with a continuous spectrum are known to fundamentally differ from those with a discrete and finite spectrum. While some fundamental tests and applications of quantum mechanics originally formulated for discrete variables have been translated to continuous ones, this is not the case in general. Here we show that it is possible to manipulate, detect, and classify continuous-variable states using observables with a continuous spectrum revealing properties and symmetries which are analogous to finite discrete systems. Our approach leads to an operational way to define, and adapt, to arbitrary continuous quantum systems, quantum protocols, and algorithms developed for discrete systems.
We investigate properties of quantum mechanical systems in the light of quantum information theory. We put an emphasize on systems with infinite-dimensional Hilbert spaces, so-called continuous-variable systems'', which are needed to describe quantum optics beyond the single photon regime and other Bosonic quantum systems. We present methods to obtain a description of such systems from a series of measurements in an efficient manner and demonstrate the performance in realistic situations by means of numerical simulations. We consider both unconditional quantum state tomography, which is applicable to arbitrary systems, and tomography of matrix product states. The latter allows for the tomography of many-body systems because the necessary number of measurements scales merely polynomially with the particle number, compared to an exponential scaling in the generic case. We also present a method to realize such a tomography scheme for a system of ultra-cold atoms in optical lattices. Furthermore, we discuss in detail the possibilities and limitations of using continuous-variable systems for measurement-based quantum computing. We will see that the distinction between Gaussian and non-Gaussian quantum states and measurements plays an crucial role. We also provide an algorithm to solve the large and interesting class of naturally occurring Hamiltonians, namely frustration free ones, efficiently and use this insight to obtain a simple approximation method for slightly frustrated systems. To achieve this goals, we make use of, among various other techniques, the well developed theory of matrix product states, tensor networks, semi-definite programming, and matrix analysis.
With the exception of references made to optical elements and detection techniques when discussing Gaussian operations and POVMs, and in their applications, the theory developed in this book has been largely presented as an abstract mathematical construction. This chapter intends to liaise our theoretical pictures to the wide world of controllable, coherent quantum systems that share the continuous variable description. Emphasis will be on the emergence of the canonical commutation relations in different contexts and on the introduction of the relevant Hamiltonian descriptions with the understanding that, once the basic formal analogy is established, the approaches and results of the previous chapters will be in principle applicable to the system at hand. Note, as a caveat, that some of the Hamiltonians listed in this chapter are not quadratic, notably those involving optical nonlinearities, superconducting systems and cold atoms, so that the Gaussian theory would not apply to them. In fact, we shall take the opportunity to briefly discuss the more exhaustive control, beyond the Gaussian regime, allowed by nonlinear Hamiltonians. Upon the description of the corresponding degrees of freedom, we will also venture to sketch two well-known proposals for the realisation of hardware for quantum computation, based respectively on optical modes and trapped ions, where quantum continuous variables play a significant role. The aim of this chapter is hence not providing a thorough and exhaustive discussion of each continuous variable system, but rather to grant the reader a degree of awareness on the possibilities offered by the diverse experimental platforms to which the theory applies. Thus, the conceptual elements will typically overshadow the (often very important when applications are concerned!) technical aspects, and glaring simplifications will be adopted. Given the central role played by the optical embodiment of quantum continuous variables, an exception to this cursory treatment has been made for the quantisation of the electromagnetic field, carried out below in detail from the classical theory. This will also present the opportunity to provide a full derivation of the input-output formalism and the associated quantum Langevin equations, which to our knowledge were never previously dealt with at a pedagogical level in the time domain, and to discuss a bag of quantum optical tools, such as the rotating wave approximation, which, although featuring in a number of introductory quantum optics textbooks, find such wide application to deserve a place in any attempt at a self-contained treatment.