Shall I refuse my dinner because I do not fully understand the process of digestion? No, not if I am satisfied with the result. O. Heaviside, Electromagnetic Theory , vol. 2, 1899 Basic notions of quantum mechanics Quantum axioms Let us start with a brief recapitulation of quantum mechanics on the “how to” level. According to the standard lore, the instantaneous state of any quantum system (that is, everything that can be known about it at a given moment of time) is given by its wave function (state vector) – a complex-valued vector in some abstract Hilbert space; the nature of this space is determined by the system. All the observables (i.e., physical quantities defined for the system and determined by its state – e.g., the position or momentum of a free particle, the energy of an oscillator) are described by Hermitian operators defined in the same Hilbert space. All three elements – the Hilbert space, the state vector, and the set of observables – are necessary to describe the outcome of any experiment one could perform with the system. Since humans cannot directly observe the behaviour of quantum objects, these outcomes are also called measurements , being the result of using some classical apparatus in order to translate the state of a quantum system into the state of the apparatus, which can then be read out by the experimentalist. The classical (i.e., non-quantum) nature of the apparatus is essential, as we shall see in a moment.
Shall I refuse my dinner because I do not fully understand the process of digestion? No, not if I am satisfied with the result. O. Heaviside, Electromagnetic Theory , vol. 2, 1899 Basic notions of quantum mechanics Quantum axioms Let us start with a brief recapitulation of quantum mechanics on the “how to” level. According to the standard lore, the instantaneous state of any quantum system (that is, everything that can be known about it at a given moment of time) is given by its wave function (state vector) – a complex-valued vector in some abstract Hilbert space; the nature of this space is determined by the system. All the observables (i.e., physical quantities defined for the system and determined by its state – e.g., the position or momentum of a free particle, the energy of an oscillator) are described by Hermitian operators defined in the same Hilbert space. All three elements – the Hilbert space, the state vector, and the set of observables – are necessary to describe the outcome of any experiment one could perform with the system. Since humans cannot directly observe the behaviour of quantum objects, these outcomes are also called measurements , being the result of using some classical apparatus in order to translate the state of a quantum system into the state of the apparatus, which can then be read out by the experimentalist. The classical (i.e., non-quantum) nature of the apparatus is essential, as we shall see in a moment.
We have seen in the previous chapter how useful wave mechanics can be in solving physical problems. But wave mechanics has several limitations. It describes physical states by means of wave functions, which are functions of the positions of the particles of the system, but why should we single out position as the fundamental physical observable? For instance, we might want to describe states in terms of probability amplitudes for particles to have certain values of the momentum or energy rather than the position. A more fundamental limitation is that there are attributes of physical systems that cannot be described at all in terms of the positions and momenta of a set of particles. One of these attributes is spin , which will be a chief subject of Chapter 4. Another is the value of the electric or magnetic field at some point in space, treated in Chapter 11. This chapter will describe the principles of quantum mechanics in a formalism which is essentially the “transformation theory” of Dirac, mentioned briefly in Section 1.4. This formalism generalizes both the wave mechanics of Schrödinger and the matrix mechanics of Heisenberg, and is sufficiently comprehensive to apply to any sort of physical system. States The first postulate of quantum mechanics is that physical states can be represented as vectors in a sort of abstract space known as Hilbert space . Before getting into Hilbert space, I need to say a bit about vectors in general. In kindergarten we learn that vectors are quantities with both magnitude and direction. Later, when we study analytic geometry, we learn instead to describe a vector in d dimensions as a string of d numbers, the components of the vector. The latter approach lends itself well to calculation, but in some respects the kindergarten version is better, because it allows us to describe relations among vectors without specifying a coordinate system. For instance, a statement that one vector is parallel to a second vector, or perpendicular to a third, has nothing to do with how we choose our coordinate system. Here we will formulate what we mean by vector spaces in general, and Hilbert space in particular, in a way that is independent of the coordinates we use to describe directions in these spaces.
The quantities in physics that can be measured are conventionally denoted observables : entities that can be observed (directly or indirectly) and to which a value in appropriate units can be assigned. Examples include position, momentum, and energy. Unlike in classical physics, the concept of an observable in quantum theory possesses a significance beyond that of the measurable: to each observable there corresponds a unique operator in an abstract, linear vector space. These operators (and others) govern all aspects of quantum systems. Quantum operators act on abstract vectors in the linear space. Especially important are the eigenvectors and eigenvalues of these operators, in particular because some of the eigenvectors are the quantum states mentioned in the preceding chapters. Furthermore, for any operator that is the mathematical image of an observable, its eigenvalues constitute the entire set of values that measurement of the observable can yield . Finally, from the quantum states one can obtain the probabilities for the occurrence of events in the microscopic world, for example, the most likely value that measurement of an observable will yield. The concepts of operators and eigenvalue problems, as well as those of quantal probabilities, of Hermiticity, and of complete sets, were encountered and exemplified in the preceding chapter using the language of differential equations. While much of quantum mechanics could be presented in terms of this language alone, certain fundamental concepts (spin, for instance) cannot be, and it eventually becomes necessary to consider quantum mechanics as a theoretical framework embedded in that abstract linear vector space known as a Hilbert space.
Abstract Chapter 9 begins laying a foundation for quantum statistical mechanics with a discussion of relevant topics in quantum mechanics. The fundamental postulates of quantum mechanics are reviewed, beginning with the definition of a quantum state and the introduction of the concept of a state vector in a Hilbert space. The representation of observables as Hermitian operators on Hilbert space vectors is described; it is shown that the eigenvalues of Hermitian operators are real and, therefore, constitute possible outcomes of measurements made on these observables. The notions compatible and non-compatible observables and implication for the measurement problem are presented. The time-dependent Schrödinger equation is introduced as generating the time-evolution of the state vector, and it is shown how to cast the Schrödinger equation into a coordinate basis to yield the wave equation of quantum mechanics. Coordinate and momentum bases and their properties are desribed. Several analytically solvable quantum systems are presented as illustrative examples. The chapter concludes with a discussion of spin and the treatment identical particles
We have seen in the previous chapter how useful wave mechanics can be in solving physical problems. But wave mechanics has several limitations. It describes physical states by means of wave functions, which are functions of the positions of the particles of the system, but why should we single out position as the fundamental physical observable? For instance, we might want to describe states in terms of probability amplitudes for particles to have certain values of the momentum or energy rather than the position. A more fundamental limitation: There are attributes of physical systems that cannot be described at all in terms of the positions and momenta of a set of particles. One of these attributes is spin , which will be the subject of Chapter 4. Another is the value of the electric or magnetic field at some point in space, treated in Chapter 11. This chapter will describe the principles of quantum mechanics in a formalism which is essentially the “transformation theory” of Dirac, mentioned briefly in Section 1.4. This formalism generalizes both the wave mechanics of Schrödinger and the matrix mechanics of Heisenberg, and is sufficiently comprehensive to apply to any sort of physical system. States The first postulate of quantum mechanics is that physical states can be represented as vectors in a sort of abstract space known as Hilbert space . Before getting into Hilbert space, I need to say a bit about vectors in general. In kindergarten we learn that vectors are quantities with both magnitude and direction. Later, when we study analytic geometry, we learn instead to describe a vector in d dimensions as a string of d numbers, the components of the vector. This latter approach lends itself well to calculation, but in some respects the kindergarten version is better, because it allows us to describe relations among vectors without specifying a coordinate system. For instance, a statement that one vector is parallel to a second vector, or perpendicular to a third, has nothing to do with how we choose our coordinate system.
The wave function Before beginning to describe the quantum theory of measurement, we shall discuss briefly the main concepts of quantum mechanics. Readers familiar with quantum mechanics may skip this section and go on to section 2.2. Consider, as a pedagogical aid, a classical particle that can move only along the x direction. For example, it might be a bead on an infinite needle. If we know at any moment of time the values of two numbers, the particle's position and momentum, then we can compute from them all other features of the particle's motion: the forces acting on it, its resulting acceleration, etc. In other words, this pair of numbers, the position and momentum, completely define the state of the classical particle at the chosen moment of time. Similarly, for three-dimensional motion the state is defined by six numbers: the three spatial coordinates x, y, z and the three corresponding components of the momentum p x , p y , p z . A quantum object, with its dual particle-like and wave-like properties, is much more complex than a classical particle. Interferometric experiments (chapter I) show that the object can be spread out over some region of space, or for the bead on a needle, over an interval of x .
Classical mechanics is usually valid at the macro scale. The changes in the position and the momentum of the object over time are described by the Hamiltonian equation of motion. The wave function in quantum mechanics, if unobserved, evolves in a smooth and continuous way according to the Schrodinger equation, which is related to the Hamiltonian equation of motion. This equation describes a linear superposition of different states at time. A quantum mechanical description of a physical system is related to a probabilistic representation; it is described by a vector in Hilbert space. This description extends the two- or three-dimensional Euclidean space into spaces that have any finite or infinite number of dimensions. The state of a compound system is projected to the subspace that corresponds to the observed state and the vector representing the state is renormalized to the unit length. An observable describes a subspace for some dimensions with a special case of one dimension.