Development and implementation of an Yb+ ion trap experiment towards coherent manipulation and entanglement

James J. McLoughlin

Published Apr 20, 2012• 1 citation

Abstract

Trapped ions are currently one of the most promising architectures for realising the quantum information processor. The long lived internal states are ideal for representing qubit states and, through controlled interactions with electromagnetic radiation, ions can be manipulated to execute coherent logic operations. In this thesis an experiment capable of trapping Yb+ ions, including 171Yb+, is presented. Since ion energy can limit the coherence of qubit manipulations, characterisation of an ion trap heating rate is vital. Using a trapped 174Yb+ ion a heating rate consistent with previous measurements of other ion species in similar ion traps is obtained. This result shows abnormal heating of Yb+ does not occur, further solidifying the suitability of this species for quantum information processing. Efficient creation, and cooling of trapped ions requires exact wavelengths for the ionising, cooling and repump transitions. A simple technique to measure the 1S0 ? 1P1 transition wavelengths, required for isotope selective photoionisation of neutral Yb, is developed. Using the technique new wavelengths, accurate to 60 MHz, are obtained and differ from previously published results by 660 MHz. Through a simple modification the technique can also predict Doppler shifted transition frequencies, which may be required in non-perpendicular atom-laser interactions. Using trapped ions, the 2S1=2 ? 2P1/2 Doppler cooling and 2D3/2 ? 2D[3/2]1/2 repump transitions are also measured to a greater accuracy than previously reported. Many experiments require wavelengths which can only be obtained using complex expensive laser systems. To remedy this a simple cost effective laser is developed to enable laser diodes to be operated at sub zero temperatures, extending the range of obtainable wavelengths. Additional diode modulation capabilities allow for the manipulation of atoms and ions with hyperfine structures. The laser is shown to be suitable for manipulating Yb+ ions by cooling a diode from 372 nm to 369 nm and simultaneously generating 2.1 GHz frequency sidebands. Coherent manipulation such as arbitrary qubit rotations, motional coupling and ground state cooling, are required for trapped ion quantum computing. Two photon stimulated Raman transitions are identified as a suitable technique to implement all of these requirements and an investigation into implementing this technique with 171Yb+ is conducted. The possibility of exciting a Raman transition via either a dipole or quadrupole transitions in 171Yb+ is analysed, with dipole transitions preferred because quadrupole transitions are found to be too demanding experimentally. An inexpensive setup, utilising a dipole transition, is designed and tested. Although currently limited the setup shows potential to be an inexpensive, high fidelity method of exciting a Raman transition.

Related papers

Yb+ ion trapping and optimum planar trap geometries for scalable quantum technology

Altaf Hussain Nizamani

Trapped ions in linear Paul traps are largely isolated from interaction with the environment. This property of trapped ions make them a primary choice for quantum technology. \nOver the last decade, trapped atomic ions in linear radio frequency Paul traps have shown to be an important tool to implement quantum algorithms. The scalability of linear ion \ntraps is required to handle large numbers of qubits, in order to implement useful quantum computation. Advance micro-fabrication technology allows the realisation of scalable ion traps. Further developments of micro-trap designs, for the purpose of scalable quantum technology, requires inter-disciplinary investigations of ion traps. Micro-scale ion trap designs typically require a versatile experimental setup. The first part of this thesis describes such an experimental setup including a chip bracket that can host macroscopic ion traps as well as advanced symmetric and asymmetric ion trap chips with up to 90 control electrodes. The system provides versatile optical access for both type of traps and the vacuum chamber is designed in a way so the ion traps can be replaced within a short amount of time. To test the working of the setup, a macroscopic ion trap with an ion-electrode distance of 310±10 μm is used to trap ytterbium ions (Yb+). The trap is characterised by measuring the heating rate, (n•), and spectral noise density SE(ω). A \nphotoionisation technique is used to ionise the different isotopes of Yb in our trap. Isotope selective photoionisation requires exact measurements of 1So↔1P1 transition for the different Yb isotopes. A technique to measure these resonant frequencies is described. \nThis technique works by observing and aligning fluorescence spots and by using this technique, the 1So↔1P1 transition frequencies for stable isotopes of Yb were measured with an accuracy of 60 MHz. These new measured transition frequencies for stable Yb isotopes differ from previously published work by 660 MHz. Furthermore, this technique can also be used to obtain the transition frequencies at different laser-atomic beam angles, typical for non-perpendicular laser-atomic beam angles. The second part of this thesis discusses the optimisation of surface trap geometries as they are being used to implement scalable ion trap designs which consist of a large number of trapping zones. The trap depth in surface traps is low compared to symmetric traps of similar dimensions. How to optimise the trap geometry to achieve maximum trap depth for a given ion height above the trap electrodes, is discussed. Fast and adiabatic ion shuttling operations in one dimension as well as ion separation and recombination processes are important for many quantum information implementations. The maximum speed of separation of trapped ions for adiabatic shuttling operations depends on the secular frequencies, the trapped ion experiences in the process. It will be shown how such ion trap structures have to be designed for fast ion separation process and linear shuttling. Numerical results of adiabatic shuttling operations for trapped ions in such trap structures are also presented.

Aug 6, 20111 citation

Yb ion trap experimental set-up and two-dimensional ion trap surface array design towards analogue quantum simulations

James Siverns

Ions trapped in Paul traps provide a system which has been shown to exhibit most of the properties required to implement quantum information processing. In particular, a two-dimensional array of ions has been shown to be a candidate for the implementation of quantum simulations. Microfabricated surface geometries provide a widely used technology with which to create structures capable of trapping the required two-dimensional array of ions. To provide a system which can utilise the properties of trapped ions a greater understanding of the surface geometries which can trap ions in two-dimensional arrays would be advantageous, and allow quantum simulators to be fabricated and tested. In this thesis I will present the design, set-up and implementation of an experimental apparatus which can be used to trap ions in a variety of different traps. Particular focus will be put on the ability to apply radio-frequency voltages to these traps via helical resonators with high quality factors. A detailed design guide will be presented for the construction and operation of such a device at a desired resonant frequency whilst maximising the quality factor for a set of experimental constraints. Devices of this nature will provide greater filtering of noise on the rf voltages used to create the electric field which traps the ions which could lead to reduced heating in trapped ions. The ability to apply higher voltages with these devices could also provide deeper traps, longer ion lifetimes and more efficient cooling of trapped ions. In order to efficiently cool trapped ions certain transitions must be known to a required accuracy. In this thesis the 2S1/2 ? 2P1/2 Doppler cooling and 2D3/2 ? 2D[3/2]1/2 repumping transition wavelengths are presented with a greater accuracy then previous work. These transitions are given for the 170, 171, 172, 174 and 176 isotopes of Yb+. Two-dimensional arrays of ions trapped above a microfabricated surface geometry provide a technology which could enable quantum simulations to be performed allowing solutions to problems currently unobtainable with classical simulation. However, the spin-spin interactions used in the simulations between neighbouring ions are required to occur on a faster time-scale than any decoherence in the system. The time-scales of both the ion-ion interactions and decoherence are determined by the properties of the electric field formed by the surface geometry. This thesis will show how geometry variables can be used to optimise the ratio between the decoherence time and the interaction time whilst simultaneously maximising the homogeneity of the array properties. In particular, it will be shown how the edges of the geometry can be varied to provide the maximum homogeneity in the array and how the radii and separation of polygons comprising the surface geometry vary as a function of array size for optimised arrays. Estimates of the power dissipation in these geometries will be given based on a simple microfabrication.

Nov 9, 20120 citations

Towards Trapped-Ion Quantum Simulation with Ground-State and Optical qubits

Midhuna Duraisamy Suganthi

Trapped ions offer a controlled and versatile platform for the simulation of spin and spin-boson quantum systems. The Coulomb interaction between ions trapped in a harmonic potential can be used to mediate interactions between effective spins in the ion chain. Generally, coherent operations on ions are performed on ground-state qubits encoded in magnetically insensitive hyperfine sublevels. In this thesis, we extend this toolbox with the aim of simultaneously manipulating both ground-state and optical qubits, with the latter encoded in metastable optically excited states. The optical qubit provides another set of coherent and dissipative operations that can be performed on the ions, opening new avenues for quantum computing and simulation. In our experiment, we use 171Yb+ and 172Yb+ ions to encode ground-state and optical qubits. We discuss the laser setup needed to address the narrow quadrupole transition from 2S1/2 →2 D3/2 of 3.02 Hz linewidth, and we describe spectroscopy techniques to study this transition in both the isotopes. We describe how the low linewidth allows resolved sideband cooling on the shared motional modes in an ion chain, enabling sympathetic cooling with one ion, 172Yb+ , while simultaneously performing coherent operations on the 171Yb+ ion. Finally, we discuss the prospects of using this tool for light-shift entangling gates, showing the flexibility of this trapped-ion system for simulating coherent as well as dissipative quantum systems.

Nov 11, 20240 citations

Laser cooling and optical trapping of Ytterbium

S. L. Kemp

This thesis presents the development of an experimental apparatus designed to investigate the ultracold collisional properties for mixtures of Cs and Yb, with a long-term view to the creation of ultracold CsYb molecules via indirect cooling methods. The unpaired electron spin that is inherent to molecules of this form gives rise to a magnetic dipole moment in addition to a ground state electric dipole moment. This enables extra control over molecular interactions and should enable the experimental simulation of spin lattice models. We focus on the implementation of a system designed to controllably laser cool and optically trap Yb. The first step in this system is the production of a magneto-optical trap (MOT) on the triplet 1S0 to 3P1 transition of Yb. With careful control over the cooling beam detunings and power, gravitational-assisted Doppler cooling allows samples of Yb to be prepared at 22 uK. This regime of enhanced Doppler cooling is investigated and proves to be a crucial step to ensuring good transfer of cold Yb to optical traps. The construction and characterisation of single and crossed beam optical dipole traps for Yb are discussed. The single beam optical trap has been used to verify a model for the optical trapping of Yb in its ground state. This trap has also been utilised as a tool for the measurement of the light shift on the 1S0 to 3P1 transition at a wavelength of 1070~nm. In the main experimental sequence, Yb atoms are loaded from the magneto-optical trap into the crossed optical dipole trap, allowing evaporative cooling ramps to quantum degeneracy to be performed. This highly-reproducible system typically forms Bose-Einstein condensates with 2 x 10^5 174Yb atoms. This thesis additionally reports on the progress made towards measurements of the interspecies scattering length for 133Cs and Yb isotopes. We present two approaches that are being developed in tandem: rethermalisation in a conservative trap, and two-photon photoassociation. Progress towards rethermalisation measurements has focussed on developing systems for the efficient transfer of Cs to an optical trap. For photoassociative measurements, a laser system has been developed and tested by producing one-photon photoassociation spectra of Cs2.

Jan 1, 20170 citations

Quantum optics experiments in a microstructured ion trap

Ulrich Poschinger

This dissertation describes a prototype experiment aiming at the realization of scalable quantum information. The essential feature is the usage of a novel microstructured ion trap derived from the Paul trap. It allows for storing and manipulating a large number of ions, as compared to conventional linear Paul traps. This thesis describes how the way is paved towards the realization of quantum information experiments in this ion trap. An analysis of the electrostatic properties of the ion trap is presented, which is laying the foundation for understanding the limits of confinement stability and effects beyond standard Paul trap behavior. The focus of this work lies on the realization and characterization of single and dual qubit operations, which are achieved by means of (semiclassical) atom-light interaction. In our experiment, the qubit is implemented in the Zeeman sublevels of the ion’s ground state, i.e. in the spin of the bright electron of a 40Ca+ ion. The main body of this thesis then describes the realization of the necessary steps of preparation, manipulation and readout of this qubit. The preparation includes optical pumping and cooling close to the motional quantum ground state by means of sideband cooling. Several possible techniques for these steps are tested and analyzed. Coherent manipulations are carried out by means of stimulated Raman transitions. Here, a strong emphasis is put on the characterization of the various decoherence mechanisms, which are dominated by the motional excitation of the ion due to thermalization of the ion with the trap electrodes, and by imperfections in the ion-laser interactions. As by-product of the latter investigation, a new measurement scheme for the experimental determination of atomic dipole matrix elements is presented.

Jan 1, 20104 citations

Experimental Methods for Trapping Ions Using Microfabricated Surface Ion Traps

Seokjun Hong, Minjae Lee, Yeong‐Dae Kwon +2 more

Ions trapped in a quadrupole Paul trap have been considered one of the strong physical candidates to implement quantum information processing. This is due to their long coherence time and their capability to manipulate and detect individual quantum bits (qubits). In more recent years, microfabricated surface ion traps have received more attention for large-scale integrated qubit platforms. This paper presents a microfabrication methodology for ion traps using micro-electro-mechanical system (MEMS) technology, including the fabrication method for a 14 µm-thick dielectric layer and metal overhang structures atop the dielectric layer. In addition, an experimental procedure for trapping ytterbium (Yb) ions of isotope 174 (174Yb+) using 369.5 nm, 399 nm, and 935 nm diode lasers is described. These methodologies and procedures involve many scientific and engineering disciplines, and this paper first presents the detailed experimental procedures. The methods discussed in this paper can easily be extended to the trapping of Yb ions of isotope 171 (171Yb+) and to the manipulation of qubits.

Journal of Visualized ExperimentsAug 17, 20174 citations