Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

PROGRAM PACKAGE MP-ZAVA FOR PARALLEL QUANTUM-CHEMICAL COMPUTING IN THE SPD-BASIS

Parvaz K. Berzigiyarov, Valentin A. Zayets, В. Ф. Разумов, Шека Елена Федоровна

Published Jul 1, 2001• 1 citation
OpenAlex

Abstract

A parallel realization of the NDDO-WF technique for semi-empirical quantum-chemical calculations on large molecular systems in the spd-basis is described. The technological aspects of designing scalable parallel calculations on super computers (by using MPI library) are discussed. The scaling of individual algorithms and entire package was carried out for two model systems with a number of atomic orbitals of 894 and 2014, respectively. The speedup was determined in computer experiments with the RM600 E60 and Cluster Intel PIII multi-processor systems. The effect of communication rate on the package performance is discussed.

Related papers

Massively parallel quantum chemical density matrix renormalization group method

Jiří Brabec, Jan Brandejs, Karol Kowalski +3 more

We present, to the best of our knowledge, the first attempt to exploit the super-computer platform for quantum chemical density matrix renormalization group (QC-DMRG) calculations. We have developed the parallel scheme based on the in-house MPI global memory library, which combines operator and symmetry sector parallelisms, and tested its performance on three different molecules, all typical candidates for QC-DMRG calculations. In case of the largest calculation, which is the nitrogenase FeMo cofactor cluster with the active space comprising 113 electrons in 76 orbitals and bond dimension equal to 6000, our parallel approach scales up to approximately 2000 CPU cores.

arXiv:2001.04890•Journal of Computational Chemistry•Dec 30, 2020•91 citations

Development of Efficient Algorithms for Quantum Chemistry Calculations of Large Molecules

和也 石村, カズヤ イシムラ, Kazuya Ishimura

Quantum chemistry plays an important role in elucidating molecular geometries, electronic states, and reaction mechanisms, because of the developments of a variety of theoretical methods, such as Hartree-Fock (HF), Møler-Plesset (MP) perturbation, configuration interaction (CI), coupled-cluster (CC), and density functional theory (DFT) methods. Electronic structure calculations have been carried out by not only theoretical chemists but also experimental chemists. DFT is currently most widely used to investigate large molecules in the ground state as well as small molecules because of the low computational cost. However, the generally used functionals fail to describe correctly non-covalent interactions that are important for host-guest molecules, self-assembly, and molecular recognition, and they tend to underestimate reaction barriers. Many attempts have been made to develop new functionals and add semiempirical or empirical correction terms to standard functionals, but no generally accepted DFT method has emerged yet. Second-order Møler-Plesset perturbation theory (MP2) is the simplest method that includes electron correlation important for non-covalent interactions and reaction barriers nonempirically. However, the computational cost of MP2 is considerably higher than that of DFT. In addition, much larger sizes of fast memory and hard disk are required in MP2 calculations. These make MP2 calculations increasingly difficult for larger molecules. Since workstation or personal computer (PC) clusters have become popular for quantum chemistry calculations, an efficient parallel calculation is a solution of the problem. Therefore, new parallel algorithms for MP2 energy and gradient calculations are presented in this thesis. Furthermore, an efficient algorithm for the generation of two-electron repulsion integrals (ERIs) which is important in quantum chemistry calculations is also presented. For the calculations of excited states, different approaches are required: for example, CI, multi-configuration self-consistent field (MCSCF), time-dependent DFT (TDDFT), and symmetry adapted cluster (SAC)/SAC-CI methods. One of the most accurate methods is SAC/SAC-CI, as demonstrated for many molecules. In this thesis, SAC/SAC-CI calculations of ground, ionized, and excited states are presented. This thesis consists of five chapters: a new algorithm of two-electron repulsion integral calculations (Chapter I), a new parallel algorithm of MP2 energy calculations (Chapter II), a new parallel algorithm of MP2 energy gradient calculations (Chapter III), applications of MP2 calculations (Chapter IV), and SAC/SAC-CI calculations of ionized and excited states (Chapter V). In quantum chemistry calculations, the generation of ERIs is one of the most basic subjects and is the most time-consuming step especially in direct SCF calculations. Many algorithms have been developed to reduce the computational cost. In Pople-Hehre algorithm, Cartesian axes are rotated to make several coordinate components zero or constant, so that these components are skipped in the generation of ERIs. In McMurchie-Davidson algorithm, ERIs are generated from (ss|ss) type integrals using a recurrence relation derived from Hermite polynomials. By combining these two algorithms, a new algorithm is developed in Chapter I. The results show that the new algorithm reduces the computational cost by 10 - 40%, as compared with the original algorithms. It is notable that the generation of ERIs including d functions is considerably fast. The program implemented officially in GAMESS in 2004 has been used all over the world. In quantum mechanics, perturbation methods can be used for adding corrections to reference solutions. In the MP perturbation method, a sum over Fock operators is used as the reference term, and the exact two-electron repulsion operator minus twice the average two-electron repulsion operator is used as the perturbation term. It is the advantage that the MP perturbation method is size consistent and size extensive, unlike truncated CI methods. The zero-order wave function is the HF Slater determinant, and the zero-order energy is expressed as a sum of occupied molecular orbital (MO) energies. The first-order perturbation is the correction for the overcounting of two-electron repulsions at zero-order, and the first-order energy corresponds to the HF energy. The MP correlation starts at second-order. In general, second-order (MP2) accounts for 80 - 90% of electron correlation. Therefore, MP2 is focused in this thesis since it is applicable to large molecules with considerable reliability and low computational cost. The formal computational scaling of MP2 energy calculations with respect to molecular size is fifth order, much higher than that of DFT energy calculations. Therefore, less expensive methods, such as Local MP2, density fitting (resolution of identity, RI) MP2, and Laplace Transform MP2, have been developed. However, all of these methods include approximations or cut-offs that need to be checked against full MP2 energies. An alternative approach to reduce the computational cost is to parallelize MP2 energy calculations. A number of papers on parallel MP2 energy calculations have been published. Almost all of them are based on simple parallelization methods that distribute only atomic orbital (AO) or MO indices to each processor. These methods have a disadvantage since intermediate integrals are broadcasted to all CPUs or the same AO ERIs are generated in all processors. Baker and Pulay developed a new parallel algorithm using SaebøAlmlöf integral transformation method. This algorithm parallelizes the first half transformation by AO indices and the second half transformation by MO indices. The advantages are that the total amount of network communication is independent of the number of processors and the AO integrals are generated only once. The disadvantage is the I/O overhead for the sorting of half-transformed integrals. A new parallel algorithm for MP2 energy calculations based on the two-step parallelization idea is presented in Chapter II. In this algorithm, AO indices are distributed in the AO integral generation and the first three quarter transformation, and MO indices are distributed in the last quarter transformation and MP2 energy calculation. Because the algorithm makes the sorting of intermediate integrals very simple, the parallel efficiency is highly improved and the I/O overhead is removed. Furthermore, the algorithm reduces highly the floating point operation (FLOP) count as well as the required memory and hard disk space, in comparison with other algorithms. Test calculations of taxol (C47H51NO14) and luciferin (C11H8N2O3S2) were performed on a cluster of Pentium 4 computers connected by gigabit Ethernet. The parallel scaling of the developed code is excellent up to the largest number of processors we have tested. For instance, the elapsed time for the MP2 energy calculations on 16 processors is on average 15.4 times faster than that on the single-processor. Determination of molecular geometries and reaction paths is a fundamental task in quantum chemistry and requires energy gradients with respect to nuclear coordinates. In Chapter III, a new parallel algorithm for MP2 energy gradient calculations is presented. The algorithm consists of 5 steps, the integral transformation, the MP2 amplitude calculation, the MP2 Lagrangian calculation, the coupled-perturbed HF calculation, and the integral derivative calculation. All steps are parallelized by distributing AO or MO indices. The algorithm also reduces the FLOP count, the required memory, and hard disk space. Test calculations of MP2 energy gradients were performed for taxol and luciferin on a cluster of Pentium 4 computers. The speedups are very good up to 80 CPU cores we have tested. For instance, the speedup ratios are 28.2 - 33.0 on 32 processors, corresponding to 88% - 103% of linear speedup. This indicates the high parallel efficiency of the present algorithm. The calculation of taxol with 6-31G(d) (1032 contracted basis functions) finishes within 2 hours on 32 processors, which requires only 1.8GB memory and 13.4GB hard disk per processor. Therefore, geometry optimization of molecules with 1000 basis functions can be easily performed using standard PC clusters. In Chapter IV, several applications of MP2 are performed using the program developed in Chapters II and III. Some molecules that DFT cannot treat well are optimized at the MP2 level. Geometry optimization is also carried out using the spin-component scaled (SCS) MP2 method. In this method, a different scaling is employed for the same and opposite spin components of the MP2 energy, so that SCS-MP2 performs as well as the much more costly CCSD(T) method at a high level of theory. SAC theory is developed for ground states and based on CC theory that describes higher-order electron correlation. The main factor of electron correlation is collisions of two electrons. In CC theory, most collisions of four electrons can be taken in as the product of collisions of tw

•Sep 28, 2007•0 citations

Coupled-Cluster Methods for Large Molecular Systems Through Massive Parallelism and Reduced-Scaling Approaches

Chong Peng

Accurate correlated electronic structure methods involve a significant amount of computations and can be only employed to small molecular systems. For example, the coupled-cluster singles, doubles, and perturbative triples model (CCSD(T)), which is known as the ``gold standard" of quantum chemistry for its accuracy, usually can treat molecules with 20-30 atoms. To extend the reach of accurate correlated electronic structure methods to larger molecular systems, we work towards two directions: parallel computing and reduced-cost/scaling approaches. Parallel computing can utilize more computational resources to handle systems that demand more substantial computational efforts. Reduced-cost/scaling approaches, which introduce approximations to the existing electronic structure methods, can significantly reduce the amount of computation and storage requirements. In this work, we introduce a new distributed-memory massively parallel implementation of standard and explicitly correlated (F12) coupled-cluster singles and doubles (CCSD) with canonical bigO{N^6} computational complexity ( C. Peng, J. A. Calvin, F. Pavov{s}evi'c, J. Zhang, and E. F. Valeev, textit{J. Phys. Chem. A} 2016, textbf{120}, 10231.), based on the TiledArray tensor framework. Excellent strong scaling is demonstrated on a multi-core shared-memory computer, a commodity distributed-memory computer, and a national-scale supercomputer. We also present a distributed-memory implementation of the density-fitting (DF) based CCSD(T) method. (C. Peng, J. A. Calvin, and E. F. Valeev, textit{in preparation for submission}) An improved parallel DF-CCSD is presented utilizing lazy evaluation for tensors with more than two unoccupied indices, which makes the DF-CCSD storage requirements always smaller than those of the non-iterative triples correction (T). Excellent strong scaling is observed on both shared-memory and distributed-memory computers equipped with conventional Intel Xeon processors and the Intel Xeon Phi (Knights Landing) processors. With the new implementation, the CCSD(T) energies can be evaluated for systems containing 200 electrons and 1000 basis functions in a few days using a small size commodity cluster, with even more massive computations possible on leadership-class computing resources. The inclusion of F12 correction to the CCSD(T) method makes it converge to basis set limit much more rapidly. The large-scale parallel explicitly correlated coupled-cluster program makes the accurate estimation of the coupled-cluster basis set limit for molecules with 20 or more atoms a routine. Thus, it can be used rigorously to test the emerging reduced-scaling coupled-cluster approaches. Moreover, we extend the pair natural orbital (PNO) approach to excited states through the equation-of-motion coupled cluster singles and doubles (EOM-CCSD) method. (C. Peng, M. C. Clement, and E. F. Valeev, textit{submitted}) We simulate the PNO-EOM-CCSD method using an existing massively parallel canonical EOM-CCSD program. We propose the use of state-averaged PNOs, which are generated from the average of the pair density of excited states, to span the PNO space of all the excited states. The doubles amplitudes in the CIS(D) method are used to compute the state-averaged pair density of excited states. The issue of incorrect states in the state-averaged pair density, caused by an energy reordering of excited states between the CIS(D) and EOM-CCSD, is resolved by simply computing more states than desired. We find that with a truncation threshold of $10^{-7}$, the truncation error for the excitation energy is already below 0.02 eV for the systems tested, while the average number of PNOs is reduced to 50-70 per pair. The accuracy of the PNO-EOM-CCSD method on local, Rydberg and charge transfer states is also investigated.

•May 2, 2018•0 citations

Toward an extreme-scale electronic structure system

Jorge Luis Galvez Vallejo, Calum Snowdon, Ryan Stocks +13 more

Electronic structure calculations have the potential to predict key matter transformations for applications of strategic technological importance, from drug discovery to material science and catalysis. However, a predictive physicochemical characterization of these processes often requires accurate quantum chemical modeling of complex molecular systems with hundreds to thousands of atoms. Due to the computationally demanding nature of electronic structure calculations and the complexity of modern high-performance computing hardware, quantum chemistry software has historically failed to operate at such large molecular scales with accuracy and speed that are useful in practice. In this paper, novel algorithms and software are presented that enable extreme-scale quantum chemistry capabilities with particular emphasis on exascale calculations. This includes the development and application of the multi-Graphics Processing Unit (GPU) library LibCChem 2.0 as part of the General Atomic and Molecular Electronic Structure System package and of the standalone Extreme-scale Electronic Structure System (EXESS), designed from the ground up for scaling on thousands of GPUs to perform high-performance accurate quantum chemistry calculations at unprecedented speed and molecular scales. Among various results, we report that the EXESS implementation enables Hartree-Fock/cc-pVDZ plus RI-MP2/cc-pVDZ/cc-pVDZ-RIFIT calculations on an ionic liquid system with 623 016 electrons and 146 592 atoms in less than 45 min using 27 600 GPUs on the Summit supercomputer with a 94.6% parallel efficiency.

The Journal of Chemical Physics•Jul 27, 2023•38 citations

Scalable quantum mechanical simulation of large polymer systems

Stefan Goedecker, Adolfy Hoisie, Joel D. Kress +2 more

We describe a program for quantum mechanical calculations of very large hydrocarbon polymer systems. It is based on a new algorithmic approach to the quantum mechanical tight binding equations that naturally leads to a very efficient parallel implementation and that scales linearly with respect to the number of atoms. We get both very high single node performance as well as a significant parallel speedup on the SGI Origin 2000 parallel computer.

•Aug 1, 1997•1 citation

Unified MPI Parallelization of Wave Function Methods: iCIPT2 as a Showcase

Qingpeng Wang, Ning Zhang, Wenjian Liu

The integration of quantum chemical methods with high-performance computing is indispensable for handling large systems with modest accuracy or even small systems but with high accuracy. Continuing with the unified implementation of nonrelativistic and relativistic wave function methods within the MetaWave platform ( J. Phys. Chem. A 2025, 129, 5170), we present here a unified MPI parallelization of the methods by abstracting every computational step of a method as a dynamically scheduled loop via ghost process, followed by a global reduction of local results from each node. The algorithmic abstraction enables the use of a single MPI template in various steps of different methods. Taking iCIPT2 [ J. Chem. Theory Comput. 2021, 17, 949] as a showcase, the parallel efficiencies achieve 94% and 89% on 16 nodes (1024 cores) for the perturbation and whole calculations, respectively. Further combined with an improved algorithm for the matrix-vector product in the matrix diagonalization and an orbital-configuration-based semistochastic estimator for the perturbation correction, this renders large active space calculations possible, so as to obtain benchmarks for the automerization of cyclobutadiene, ground-state energy of benzene, and potential energy profile of ozone. It is also shown that the error of iCIPT2 follows a power law with respect to the number of configuration state functions.

arXiv:2602.04470•Journal of Chemical Theory and Computation•Mar 23, 2026•2 citations
A parallel realization of the NDDO-WF technique for semi-empirical quantum-chemical calculations on large molecular systems in the spd-basis is described. The technological aspects of designing scalable parallel calculations on super computers (by using MPI library) are discussed. The scaling of individual algorithms and entire package was carried out for two model systems with a number of atomic orbitals of 894 and 2014, respectively. The speedup was determined in computer experiments with the RM600 E60 and Cluster Intel PIII multi-processor systems. The effect of communication rate on the package performance is discussed.
We present, to the best of our knowledge, the first attempt to exploit the super-computer platform for quantum chemical density matrix renormalization group (QC-DMRG) calculations. We have developed the parallel scheme based on the in-house MPI global memory library, which combines operator and symmetry sector parallelisms, and tested its performance on three different molecules, all typical candidates for QC-DMRG calculations. In case of the largest calculation, which is the nitrogenase FeMo cofactor cluster with the active space comprising 113 electrons in 76 orbitals and bond dimension equal to 6000, our parallel approach scales up to approximately 2000 CPU cores.
Quantum chemistry plays an important role in elucidating molecular geometries, electronic states, and reaction mechanisms, because of the developments of a variety of theoretical methods, such as Hartree-Fock (HF), Møler-Plesset (MP) perturbation, configuration interaction (CI), coupled-cluster (CC), and density functional theory (DFT) methods. Electronic structure calculations have been carried out by not only theoretical chemists but also experimental chemists. DFT is currently most widely used to investigate large molecules in the ground state as well as small molecules because of the low computational cost. However, the generally used functionals fail to describe correctly non-covalent interactions that are important for host-guest molecules, self-assembly, and molecular recognition, and they tend to underestimate reaction barriers. Many attempts have been made to develop new functionals and add semiempirical or empirical correction terms to standard functionals, but no generally accepted DFT method has emerged yet. Second-order Møler-Plesset perturbation theory (MP2) is the simplest method that includes electron correlation important for non-covalent interactions and reaction barriers nonempirically. However, the computational cost of MP2 is considerably higher than that of DFT. In addition, much larger sizes of fast memory and hard disk are required in MP2 calculations. These make MP2 calculations increasingly difficult for larger molecules. Since workstation or personal computer (PC) clusters have become popular for quantum chemistry calculations, an efficient parallel calculation is a solution of the problem. Therefore, new parallel algorithms for MP2 energy and gradient calculations are presented in this thesis. Furthermore, an efficient algorithm for the generation of two-electron repulsion integrals (ERIs) which is important in quantum chemistry calculations is also presented. For the calculations of excited states, different approaches are required: for example, CI, multi-configuration self-consistent field (MCSCF), time-dependent DFT (TDDFT), and symmetry adapted cluster (SAC)/SAC-CI methods. One of the most accurate methods is SAC/SAC-CI, as demonstrated for many molecules. In this thesis, SAC/SAC-CI calculations of ground, ionized, and excited states are presented. This thesis consists of five chapters: a new algorithm of two-electron repulsion integral calculations (Chapter I), a new parallel algorithm of MP2 energy calculations (Chapter II), a new parallel algorithm of MP2 energy gradient calculations (Chapter III), applications of MP2 calculations (Chapter IV), and SAC/SAC-CI calculations of ionized and excited states (Chapter V). In quantum chemistry calculations, the generation of ERIs is one of the most basic subjects and is the most time-consuming step especially in direct SCF calculations. Many algorithms have been developed to reduce the computational cost. In Pople-Hehre algorithm, Cartesian axes are rotated to make several coordinate components zero or constant, so that these components are skipped in the generation of ERIs. In McMurchie-Davidson algorithm, ERIs are generated from (ss|ss) type integrals using a recurrence relation derived from Hermite polynomials. By combining these two algorithms, a new algorithm is developed in Chapter I. The results show that the new algorithm reduces the computational cost by 10 - 40%, as compared with the original algorithms. It is notable that the generation of ERIs including d functions is considerably fast. The program implemented officially in GAMESS in 2004 has been used all over the world. In quantum mechanics, perturbation methods can be used for adding corrections to reference solutions. In the MP perturbation method, a sum over Fock operators is used as the reference term, and the exact two-electron repulsion operator minus twice the average two-electron repulsion operator is used as the perturbation term. It is the advantage that the MP perturbation method is size consistent and size extensive, unlike truncated CI methods. The zero-order wave function is the HF Slater determinant, and the zero-order energy is expressed as a sum of occupied molecular orbital (MO) energies. The first-order perturbation is the correction for the overcounting of two-electron repulsions at zero-order, and the first-order energy corresponds to the HF energy. The MP correlation starts at second-order. In general, second-order (MP2) accounts for 80 - 90% of electron correlation. Therefore, MP2 is focused in this thesis since it is applicable to large molecules with considerable reliability and low computational cost. The formal computational scaling of MP2 energy calculations with respect to molecular size is fifth order, much higher than that of DFT energy calculations. Therefore, less expensive methods, such as Local MP2, density fitting (resolution of identity, RI) MP2, and Laplace Transform MP2, have been developed. However, all of these methods include approximations or cut-offs that need to be checked against full MP2 energies. An alternative approach to reduce the computational cost is to parallelize MP2 energy calculations. A number of papers on parallel MP2 energy calculations have been published. Almost all of them are based on simple parallelization methods that distribute only atomic orbital (AO) or MO indices to each processor. These methods have a disadvantage since intermediate integrals are broadcasted to all CPUs or the same AO ERIs are generated in all processors. Baker and Pulay developed a new parallel algorithm using SaebøAlmlöf integral transformation method. This algorithm parallelizes the first half transformation by AO indices and the second half transformation by MO indices. The advantages are that the total amount of network communication is independent of the number of processors and the AO integrals are generated only once. The disadvantage is the I/O overhead for the sorting of half-transformed integrals. A new parallel algorithm for MP2 energy calculations based on the two-step parallelization idea is presented in Chapter II. In this algorithm, AO indices are distributed in the AO integral generation and the first three quarter transformation, and MO indices are distributed in the last quarter transformation and MP2 energy calculation. Because the algorithm makes the sorting of intermediate integrals very simple, the parallel efficiency is highly improved and the I/O overhead is removed. Furthermore, the algorithm reduces highly the floating point operation (FLOP) count as well as the required memory and hard disk space, in comparison with other algorithms. Test calculations of taxol (C47H51NO14) and luciferin (C11H8N2O3S2) were performed on a cluster of Pentium 4 computers connected by gigabit Ethernet. The parallel scaling of the developed code is excellent up to the largest number of processors we have tested. For instance, the elapsed time for the MP2 energy calculations on 16 processors is on average 15.4 times faster than that on the single-processor. Determination of molecular geometries and reaction paths is a fundamental task in quantum chemistry and requires energy gradients with respect to nuclear coordinates. In Chapter III, a new parallel algorithm for MP2 energy gradient calculations is presented. The algorithm consists of 5 steps, the integral transformation, the MP2 amplitude calculation, the MP2 Lagrangian calculation, the coupled-perturbed HF calculation, and the integral derivative calculation. All steps are parallelized by distributing AO or MO indices. The algorithm also reduces the FLOP count, the required memory, and hard disk space. Test calculations of MP2 energy gradients were performed for taxol and luciferin on a cluster of Pentium 4 computers. The speedups are very good up to 80 CPU cores we have tested. For instance, the speedup ratios are 28.2 - 33.0 on 32 processors, corresponding to 88% - 103% of linear speedup. This indicates the high parallel efficiency of the present algorithm. The calculation of taxol with 6-31G(d) (1032 contracted basis functions) finishes within 2 hours on 32 processors, which requires only 1.8GB memory and 13.4GB hard disk per processor. Therefore, geometry optimization of molecules with 1000 basis functions can be easily performed using standard PC clusters. In Chapter IV, several applications of MP2 are performed using the program developed in Chapters II and III. Some molecules that DFT cannot treat well are optimized at the MP2 level. Geometry optimization is also carried out using the spin-component scaled (SCS) MP2 method. In this method, a different scaling is employed for the same and opposite spin components of the MP2 energy, so that SCS-MP2 performs as well as the much more costly CCSD(T) method at a high level of theory. SAC theory is developed for ground states and based on CC theory that describes higher-order electron correlation. The main factor of electron correlation is collisions of two electrons. In CC theory, most collisions of four electrons can be taken in as the product of collisions of tw
Accurate correlated electronic structure methods involve a significant amount of computations and can be only employed to small molecular systems. For example, the coupled-cluster singles, doubles, and perturbative triples model (CCSD(T)), which is known as the ``gold standard" of quantum chemistry for its accuracy, usually can treat molecules with 20-30 atoms. To extend the reach of accurate correlated electronic structure methods to larger molecular systems, we work towards two directions: parallel computing and reduced-cost/scaling approaches. Parallel computing can utilize more computational resources to handle systems that demand more substantial computational efforts. Reduced-cost/scaling approaches, which introduce approximations to the existing electronic structure methods, can significantly reduce the amount of computation and storage requirements. In this work, we introduce a new distributed-memory massively parallel implementation of standard and explicitly correlated (F12) coupled-cluster singles and doubles (CCSD) with canonical bigO{N^6} computational complexity ( C. Peng, J. A. Calvin, F. Pavov{s}evi'c, J. Zhang, and E. F. Valeev, textit{J. Phys. Chem. A} 2016, textbf{120}, 10231.), based on the TiledArray tensor framework. Excellent strong scaling is demonstrated on a multi-core shared-memory computer, a commodity distributed-memory computer, and a national-scale supercomputer. We also present a distributed-memory implementation of the density-fitting (DF) based CCSD(T) method. (C. Peng, J. A. Calvin, and E. F. Valeev, textit{in preparation for submission}) An improved parallel DF-CCSD is presented utilizing lazy evaluation for tensors with more than two unoccupied indices, which makes the DF-CCSD storage requirements always smaller than those of the non-iterative triples correction (T). Excellent strong scaling is observed on both shared-memory and distributed-memory computers equipped with conventional Intel Xeon processors and the Intel Xeon Phi (Knights Landing) processors. With the new implementation, the CCSD(T) energies can be evaluated for systems containing 200 electrons and 1000 basis functions in a few days using a small size commodity cluster, with even more massive computations possible on leadership-class computing resources. The inclusion of F12 correction to the CCSD(T) method makes it converge to basis set limit much more rapidly. The large-scale parallel explicitly correlated coupled-cluster program makes the accurate estimation of the coupled-cluster basis set limit for molecules with 20 or more atoms a routine. Thus, it can be used rigorously to test the emerging reduced-scaling coupled-cluster approaches. Moreover, we extend the pair natural orbital (PNO) approach to excited states through the equation-of-motion coupled cluster singles and doubles (EOM-CCSD) method. (C. Peng, M. C. Clement, and E. F. Valeev, textit{submitted}) We simulate the PNO-EOM-CCSD method using an existing massively parallel canonical EOM-CCSD program. We propose the use of state-averaged PNOs, which are generated from the average of the pair density of excited states, to span the PNO space of all the excited states. The doubles amplitudes in the CIS(D) method are used to compute the state-averaged pair density of excited states. The issue of incorrect states in the state-averaged pair density, caused by an energy reordering of excited states between the CIS(D) and EOM-CCSD, is resolved by simply computing more states than desired. We find that with a truncation threshold of 10−710^{-7}10−7, the truncation error for the excitation energy is already below 0.02 eV for the systems tested, while the average number of PNOs is reduced to 50-70 per pair. The accuracy of the PNO-EOM-CCSD method on local, Rydberg and charge transfer states is also investigated.
Electronic structure calculations have the potential to predict key matter transformations for applications of strategic technological importance, from drug discovery to material science and catalysis. However, a predictive physicochemical characterization of these processes often requires accurate quantum chemical modeling of complex molecular systems with hundreds to thousands of atoms. Due to the computationally demanding nature of electronic structure calculations and the complexity of modern high-performance computing hardware, quantum chemistry software has historically failed to operate at such large molecular scales with accuracy and speed that are useful in practice. In this paper, novel algorithms and software are presented that enable extreme-scale quantum chemistry capabilities with particular emphasis on exascale calculations. This includes the development and application of the multi-Graphics Processing Unit (GPU) library LibCChem 2.0 as part of the General Atomic and Molecular Electronic Structure System package and of the standalone Extreme-scale Electronic Structure System (EXESS), designed from the ground up for scaling on thousands of GPUs to perform high-performance accurate quantum chemistry calculations at unprecedented speed and molecular scales. Among various results, we report that the EXESS implementation enables Hartree-Fock/cc-pVDZ plus RI-MP2/cc-pVDZ/cc-pVDZ-RIFIT calculations on an ionic liquid system with 623 016 electrons and 146 592 atoms in less than 45 min using 27 600 GPUs on the Summit supercomputer with a 94.6% parallel efficiency.
The integration of quantum chemical methods with high-performance computing is indispensable for handling large systems with modest accuracy or even small systems but with high accuracy. Continuing with the unified implementation of nonrelativistic and relativistic wave function methods within the MetaWave platform ( J. Phys. Chem. A 2025, 129, 5170), we present here a unified MPI parallelization of the methods by abstracting every computational step of a method as a dynamically scheduled loop via ghost process, followed by a global reduction of local results from each node. The algorithmic abstraction enables the use of a single MPI template in various steps of different methods. Taking iCIPT2 [ J. Chem. Theory Comput. 2021, 17, 949] as a showcase, the parallel efficiencies achieve 94% and 89% on 16 nodes (1024 cores) for the perturbation and whole calculations, respectively. Further combined with an improved algorithm for the matrix-vector product in the matrix diagonalization and an orbital-configuration-based semistochastic estimator for the perturbation correction, this renders large active space calculations possible, so as to obtain benchmarks for the automerization of cyclobutadiene, ground-state energy of benzene, and potential energy profile of ozone. It is also shown that the error of iCIPT2 follows a power law with respect to the number of configuration state functions.