Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.15952

Quasi-Cyclic Qudit Lifted Product Codes with Almost Linear Minimum Distance

Shantom Kumar Borah, Abhinav Vaishya, V. Lalitha, Asit Kumar Pradhan, Bane V. Vasic, Narayanan Rengaswamy

Published Nov 11, 2026• 0 citations
arXivHTMLPDF

Abstract

Quantum low-density parity-check (QLDPC) codes are a promising route to fault-tolerant quantum computation with low overhead, and qudits offer advantages over qubits including more efficient information representation, improved magic state distillation, and richer algebraic structure for code design. Asymptotically good QLDPC codes arise from the lifted product (LP) construction with non-abelian lifts, but cyclic lifts remain attractive in practice because the resulting quasi-cyclic codes have circulant structure that hardware decoders exploit, which matters especially for non-binary decoders with costly check node operations. We introduce a qudit generalization of the LP construction over cyclic group algebras, which extends hypergraph product and LP codes to arbitrary prime-power dimensions and yields quasi-cyclic qudit CSS codes for every stacking order. We bound encoding rates via a connection to additive codes, and show that in the fully stacked case, qudit LP codes built from lifted Tanner codes on expander graphs form families with $Θ(\log N)$ logical qudits and almost linear minimum distance $Θ(N/\log N)$, via a distance bound that holds for a general class of LP factors. We also study an additive decoder for general qudit codes and a linear merged-syndrome decoder for fully stacked codes. Monte Carlo simulations under a depolarizing channel with equal symbol error probability show that qudit codes achieve lower frame error rates than comparable qubit codes, and that the linear decoder gives further gains for fully stacked codes.

DOI
10.48550/arxiv.2611.15952

Related papers

Non-Binary Hypergraph Product Codes for Qudit Error Correction

Shantom Kumar Borah, Asit Kumar Pradhan, Nithin Raveendran +2 more

Quantum low-density parity-check (QLDPC) codes are an important class of quantum error-correcting codes that have low-weight stabilizer generators and typically offer encoding rates much higher than popular topological quantum codes such as surface and toric codes. While recent constructions of QLDPC codes have been aimed at two-level quantum systems, several hardware platforms for quantum computing, including superconducting and photonic systems, support a much larger Hilbert space. This makes the design of qudit-based quantum LDPC codes an issue of paramount significance in harnessing the increased flexibility afforded by high -dimensional quantum systems. In this paper, we forge the first steps in addressing this gap and explore the generalization of QLDPC constructions to qudit systems. We review two methods of generalizing binary quantum codes to qudit codes, namely, the stack and merge constructions, and investigate the application of these two meth-ods to the well-known hypergraph product and lifted-product codes. Subsequently, we provide upper and lower bounds for the encoding rates of the resulting qudit codes. We also prove an interesting relationship between the qudit hypergraph product and qudit lifted-product codes: the merge construction applied to the lifted product code is equivalent to the stack construction applied to the hypergraph product code under certain conditions. We evaluate the performance of these qudit codes under non-binary belief-propagation decoding and observe that qudit codes offer us a greater degree of flexibility in optimizing their rate-performance trade-off. We also demonstrate that, under certain conditions, qudit codes can simultaneously achieve higher rates and higher frame error rate (FER) performance than their binary counterparts.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 15, 2024•2 citations

Logical computation with canonical lifted product codes

Han Zheng, Guo Zheng, Liang Jiang +1 more

High-rate quantum low-density parity-check (qLDPC) codes encode many logical qubits with low physical-qubit overhead, but realizing efficient fault-tolerant computation on such dense encodings remains a major challenge. Generic, code-agnostic techniques such as code surgery and gate teleportation apply broadly, but are difficult to make modular, low-overhead, and fully certifiable on complex high-rate codes whose structure is left unexploited. Here we overcome these obstacles by co-designing the code together with its logical instruction set for a broad family of canonical lifted-product (LP) codes with cyclic symmetry. We show that these codes admit a canonical logical basis, in which conjugate logical operators are organized into rows and columns of cyclic orbits inherited directly from the underlying classical codes, analogous to the structure that makes hypergraph-product codes so tractable. This canonical basis enables universal logical processing using magic-state input and a constant number of reusable seed surgery gadgets---only two (resp. four) for a $[[1122,148,\leq 20]]$ (resp. $[[4350,1224,\leq 20]]$) LP code. A fixed extractor smaller than half the data block also enables arbitrarily high-weight logical Pauli-product measurements (PPMs) while preserving the code's cyclic symmetry. These codes also enable rigorously fault-tolerant parallel logic, including PPMs across all logical qubits and magic-state injection from many surface codes into a full LP block. For example, a $[[468,36,20]]$ (resp. $[[952,112,17]]$) code supports simultaneous measurements of arbitrary logically disjoint Pauli products with an ancilla overhead of roughly three (resp. four) times the data block size. These results advance the frontier of fault-tolerant quantum computation on ultra-high-rate quantum architectures.

quant-pharXiv:2607.28605•Jul 31, 2026•16 citations

On the Minimum Distances of Finite-Length Lifted Product Quantum LDPC Codes

Nithin Raveendran, David Declercq, Bane V. Vasic

Quantum error correction (QEC) is critical for the practical realization of fault-tolerant quantum computing and quantum communication systems. Recently proposed families of quantum low-density parity-check (QLDPC) codes are prime candidates for advanced QEC hardware architectures. This paper focuses on finite-length QLDPC code design criteria, specifically aimed at constructing degenerate quasi-cyclic symmetric lifted-product (LP-QLDPC) codes with high minimum distances. We describe necessary conditions to ensure that the designed LP-QLDPC codes have a minimum distance strictly greater than the minimum weight stabilizer generators, thus ensuring superior error correction performance. The focus of the paper is on LP-QLDPC codes built from quasi-cyclic base codes belonging to the class of type-1 protographs, and the necessary constraints are efficiently expressed in terms of row and column indices of the base parity check matrix. This gives us combinatorial constraints - termed as Row-Column Partition Constraints (RCPC) - on classical quasi-cyclic base matrices to construct degenerate LP-QLDPC codes. For type-1 protographs, RCPC constraints provide an efficient certification approach to designing good codes, and we also give exhaustive search evidence on small base matrices. Simulations with BP+OSD decoding demonstrate significant logical error-rate gains when RCPC is avoided. We discuss extensions to circuit-level noise and outline sufficient conditions and research directions for exact distance preservation.

International Conference on Communications•May 24, 2026•1 citation

Lifting Lifted Product Codes

Yuta Hirasaki, Jong Yeon Lee

Lifted product (LP) codes form an important class of quantum error correcting codes with favorable code parameters. We introduce a systematic construction of LP code families based on group extensions and graph lifts. The construction increases the code size while preserving the local structure of the Tanner graph, and relates code parameters, logical operators, and fault-tolerant logical-operation gadgets within the families through chain and cochain maps. As a first application, we obtain LP codes with better code parameters than previously reported ones. We then demonstrate that code-surgery gadgets can be transferred across the selected finite lifts through chain maps and, in several cases, implemented with lower space overhead. We also develop parallel product surgery for lifted clustered cyclic codes. Finally, we propose lifting as a systematic first step toward defining thermodynamic families for algebraically defined qLDPC codes without an underlying Euclidean lattice. For several base codes and selected lifts, coherent information exhibits finite-size crossings, while our results also indicate that additional conditions are needed to determine a unique family.

quant-pharXiv:2607.28621•Jul 31, 2026•7 citations

Decoding Quasi-Cyclic Quantum LDPC Codes

Louis Golowich, Venkatesan Guruswami

Quantum low-density parity-check (qLDPC) codes are an important component in the quest for quantum fault tolerance. Dramatic recent progress on qLDPC codes has led to constructions which are asymptotically good, and which admit linear-time decoders to correct errors affecting a constant fraction of codeword qubits. These constructions, while theoretically explicit, rely on inner codes with strong properties only shown to exist by probabilistic arguments, resulting in lengths that are too large to be practically relevant. In practice, the surface/toric codes, which are the product of two repetition codes, are still often the qLDPC codes of choice. A previous construction of qLDPC codes based on the lifted product of an expander-based classical LDPC code with a repetition code (Panteleev and Kalachev, 2020) achieved a near-linear distance, and avoids the need for such intractable inner codes. Our main result is an efficient decoding algorithm for these codes that corrects a near-linear number of adversarial errors. En route, we give a similar algorithm for the hypergraph product version these codes, which are simpler but have distance growing only as the square root of the block length. Our decoding algorithms leverage the fact that the codes we consider are quasi-cyclic, meaning that they respect a cyclic group symmetry. Since the repetition code is not based on expanders, previous approaches to decoding expander-based qLDPC codes, which typically worked by greedily flipping code bits to reduce some potential function, do not apply in our setting. Instead, we reduce our decoding problem (in a black-box manner) to that of decoding classical expander-based LDPC codes under noisy parity-check syndromes. For completeness, we also include a treatment of such classical noisy-syndrome decoding that is sufficient for our application to the quantum setting.

arXiv:2411.04464•Annual Symposium on Foundations of Computer Science•Oct 27, 2024•3 citations

Linear Time Iterative Decoders for Hypergraph-Product and Lifted-Product Codes

Asit Kumar Pradhan, Nithin Raveendran, Narayanan Rengaswamy +1 more

Quantum low-density parity-check (QLDPC) codes with asymptotically non-zero rates are prominent candidates for achieving fault-tolerant quantum computation, primarily due to the low operational depth of their syndrome-measurement circuits. Numerous studies advocate the necessity of fast decoders to fully harness the capabilities of QLDPC codes, thus driving the focus towards designing low-complexity iterative decoders. However, empirical investigations indicate that such iterative decoders are susceptible to having a high error floor when decoding QLDPC codes. The main objective of this paper is to analyze the decoding failures of thehypergraph-product(HGP) andlifted-product(LP) codes and to design decoders that mitigate these failures, thus achieving a reduced error floor. The suboptimal performance of these codes can predominantly be ascribed to two structural phenomena: (1) stabilizer-induced trapping sets (TS), which correspond to stabilizer-induced subgraphs in the Tanner graphs, and (2) classical trapping sets (TS), which originate from the classical codes used in the construction of HGP and LP codes. The dynamics of stabilizer-induced TSs are examined, and a straightforward modification of iterative decoders is proposed to circumvent these TSs. Moreover, this work proposes a systematic methodology for designing decoders that can circumvent the classical TSs in both HGP and LP codes by deriving them from decoders capable of avoiding the TSs in the parent classical LDPC codes. When decoders that can avoid stabilizer-induced TSs are run in parallel with those that can mitigate the effect of classical TSs, the logical error rate improves significantly in the error-floor region.

arXiv:2504.01728•IEEE Transactions on Information Theory•Apr 27, 2026•7 citations
Quantum low-density parity-check (QLDPC) codes are a promising route to fault-tolerant quantum computation with low overhead, and qudits offer advantages over qubits including more efficient information representation, improved magic state distillation, and richer algebraic structure for code design. Asymptotically good QLDPC codes arise from the lifted product (LP) construction with non-abelian lifts, but cyclic lifts remain attractive in practice because the resulting quasi-cyclic codes have circulant structure that hardware decoders exploit, which matters especially for non-binary decoders with costly check node operations. We introduce a qudit generalization of the LP construction over cyclic group algebras, which extends hypergraph product and LP codes to arbitrary prime-power dimensions and yields quasi-cyclic qudit CSS codes for every stacking order. We bound encoding rates via a connection to additive codes, and show that in the fully stacked case, qudit LP codes built from lifted Tanner codes on expander graphs form families with Θ(log⁡N)Θ(\log N)Θ(logN) logical qudits and almost linear minimum distance Θ(N/log⁡N)Θ(N/\log N)Θ(N/logN), via a distance bound that holds for a general class of LP factors. We also study an additive decoder for general qudit codes and a linear merged-syndrome decoder for fully stacked codes. Monte Carlo simulations under a depolarizing channel with equal symbol error probability show that qudit codes achieve lower frame error rates than comparable qubit codes, and that the linear decoder gives further gains for fully stacked codes.
Quantum low-density parity-check (QLDPC) codes are an important class of quantum error-correcting codes that have low-weight stabilizer generators and typically offer encoding rates much higher than popular topological quantum codes such as surface and toric codes. While recent constructions of QLDPC codes have been aimed at two-level quantum systems, several hardware platforms for quantum computing, including superconducting and photonic systems, support a much larger Hilbert space. This makes the design of qudit-based quantum LDPC codes an issue of paramount significance in harnessing the increased flexibility afforded by high -dimensional quantum systems. In this paper, we forge the first steps in addressing this gap and explore the generalization of QLDPC constructions to qudit systems. We review two methods of generalizing binary quantum codes to qudit codes, namely, the stack and merge constructions, and investigate the application of these two meth-ods to the well-known hypergraph product and lifted-product codes. Subsequently, we provide upper and lower bounds for the encoding rates of the resulting qudit codes. We also prove an interesting relationship between the qudit hypergraph product and qudit lifted-product codes: the merge construction applied to the lifted product code is equivalent to the stack construction applied to the hypergraph product code under certain conditions. We evaluate the performance of these qudit codes under non-binary belief-propagation decoding and observe that qudit codes offer us a greater degree of flexibility in optimizing their rate-performance trade-off. We also demonstrate that, under certain conditions, qudit codes can simultaneously achieve higher rates and higher frame error rate (FER) performance than their binary counterparts.
High-rate quantum low-density parity-check (qLDPC) codes encode many logical qubits with low physical-qubit overhead, but realizing efficient fault-tolerant computation on such dense encodings remains a major challenge. Generic, code-agnostic techniques such as code surgery and gate teleportation apply broadly, but are difficult to make modular, low-overhead, and fully certifiable on complex high-rate codes whose structure is left unexploited. Here we overcome these obstacles by co-designing the code together with its logical instruction set for a broad family of canonical lifted-product (LP) codes with cyclic symmetry. We show that these codes admit a canonical logical basis, in which conjugate logical operators are organized into rows and columns of cyclic orbits inherited directly from the underlying classical codes, analogous to the structure that makes hypergraph-product codes so tractable. This canonical basis enables universal logical processing using magic-state input and a constant number of reusable seed surgery gadgets---only two (resp. four) for a [[1122,148,≤20]][[1122,148,\leq 20]][[1122,148,≤20]] (resp. [[4350,1224,≤20]][[4350,1224,\leq 20]][[4350,1224,≤20]]) LP code. A fixed extractor smaller than half the data block also enables arbitrarily high-weight logical Pauli-product measurements (PPMs) while preserving the code's cyclic symmetry. These codes also enable rigorously fault-tolerant parallel logic, including PPMs across all logical qubits and magic-state injection from many surface codes into a full LP block. For example, a [[468,36,20]][[468,36,20]][[468,36,20]] (resp. [[952,112,17]][[952,112,17]][[952,112,17]]) code supports simultaneous measurements of arbitrary logically disjoint Pauli products with an ancilla overhead of roughly three (resp. four) times the data block size. These results advance the frontier of fault-tolerant quantum computation on ultra-high-rate quantum architectures.
Quantum error correction (QEC) is critical for the practical realization of fault-tolerant quantum computing and quantum communication systems. Recently proposed families of quantum low-density parity-check (QLDPC) codes are prime candidates for advanced QEC hardware architectures. This paper focuses on finite-length QLDPC code design criteria, specifically aimed at constructing degenerate quasi-cyclic symmetric lifted-product (LP-QLDPC) codes with high minimum distances. We describe necessary conditions to ensure that the designed LP-QLDPC codes have a minimum distance strictly greater than the minimum weight stabilizer generators, thus ensuring superior error correction performance. The focus of the paper is on LP-QLDPC codes built from quasi-cyclic base codes belonging to the class of type-1 protographs, and the necessary constraints are efficiently expressed in terms of row and column indices of the base parity check matrix. This gives us combinatorial constraints - termed as Row-Column Partition Constraints (RCPC) - on classical quasi-cyclic base matrices to construct degenerate LP-QLDPC codes. For type-1 protographs, RCPC constraints provide an efficient certification approach to designing good codes, and we also give exhaustive search evidence on small base matrices. Simulations with BP+OSD decoding demonstrate significant logical error-rate gains when RCPC is avoided. We discuss extensions to circuit-level noise and outline sufficient conditions and research directions for exact distance preservation.
Lifted product (LP) codes form an important class of quantum error correcting codes with favorable code parameters. We introduce a systematic construction of LP code families based on group extensions and graph lifts. The construction increases the code size while preserving the local structure of the Tanner graph, and relates code parameters, logical operators, and fault-tolerant logical-operation gadgets within the families through chain and cochain maps. As a first application, we obtain LP codes with better code parameters than previously reported ones. We then demonstrate that code-surgery gadgets can be transferred across the selected finite lifts through chain maps and, in several cases, implemented with lower space overhead. We also develop parallel product surgery for lifted clustered cyclic codes. Finally, we propose lifting as a systematic first step toward defining thermodynamic families for algebraically defined qLDPC codes without an underlying Euclidean lattice. For several base codes and selected lifts, coherent information exhibits finite-size crossings, while our results also indicate that additional conditions are needed to determine a unique family.
Quantum low-density parity-check (qLDPC) codes are an important component in the quest for quantum fault tolerance. Dramatic recent progress on qLDPC codes has led to constructions which are asymptotically good, and which admit linear-time decoders to correct errors affecting a constant fraction of codeword qubits. These constructions, while theoretically explicit, rely on inner codes with strong properties only shown to exist by probabilistic arguments, resulting in lengths that are too large to be practically relevant. In practice, the surface/toric codes, which are the product of two repetition codes, are still often the qLDPC codes of choice. A previous construction of qLDPC codes based on the lifted product of an expander-based classical LDPC code with a repetition code (Panteleev and Kalachev, 2020) achieved a near-linear distance, and avoids the need for such intractable inner codes. Our main result is an efficient decoding algorithm for these codes that corrects a near-linear number of adversarial errors. En route, we give a similar algorithm for the hypergraph product version these codes, which are simpler but have distance growing only as the square root of the block length. Our decoding algorithms leverage the fact that the codes we consider are quasi-cyclic, meaning that they respect a cyclic group symmetry. Since the repetition code is not based on expanders, previous approaches to decoding expander-based qLDPC codes, which typically worked by greedily flipping code bits to reduce some potential function, do not apply in our setting. Instead, we reduce our decoding problem (in a black-box manner) to that of decoding classical expander-based LDPC codes under noisy parity-check syndromes. For completeness, we also include a treatment of such classical noisy-syndrome decoding that is sufficient for our application to the quantum setting.
Quantum low-density parity-check (QLDPC) codes with asymptotically non-zero rates are prominent candidates for achieving fault-tolerant quantum computation, primarily due to the low operational depth of their syndrome-measurement circuits. Numerous studies advocate the necessity of fast decoders to fully harness the capabilities of QLDPC codes, thus driving the focus towards designing low-complexity iterative decoders. However, empirical investigations indicate that such iterative decoders are susceptible to having a high error floor when decoding QLDPC codes. The main objective of this paper is to analyze the decoding failures of thehypergraph-product(HGP) andlifted-product(LP) codes and to design decoders that mitigate these failures, thus achieving a reduced error floor. The suboptimal performance of these codes can predominantly be ascribed to two structural phenomena: (1) stabilizer-induced trapping sets (TS), which correspond to stabilizer-induced subgraphs in the Tanner graphs, and (2) classical trapping sets (TS), which originate from the classical codes used in the construction of HGP and LP codes. The dynamics of stabilizer-induced TSs are examined, and a straightforward modification of iterative decoders is proposed to circumvent these TSs. Moreover, this work proposes a systematic methodology for designing decoders that can circumvent the classical TSs in both HGP and LP codes by deriving them from decoders capable of avoiding the TSs in the parent classical LDPC codes. When decoders that can avoid stabilizer-induced TSs are run in parallel with those that can mitigate the effect of classical TSs, the logical error rate improves significantly in the error-floor region.