Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.14358 · Physical Review Applied

High-speed control of a fluxonium qubit via picosecond pulses from Josephson digital circuits

M. V. Bastrakova, D. S. Pashin, V. A. Vozhakov, N. V. Klenov, I. I. Soloviev

Published Nov 3, 2026• 0 citations
arXivHTMLPDF

Abstract

We develop a control strategy for fluxonium qubits based on picosecond single-flux-quantum (SFQ) pulses generated by Josephson digital circuits. A major challenge is that SFQ protocols originally designed for transmon control become inefficient for low-frequency fluxonium. In this regime, the asymmetry of flux and charge couplings leads either to excessive leakage or excessively long gate times. We show that this limitation can be overcome by two complementary protocols. The first protocol employs high-frequency SFQ pulse packets applied through the flux channel, offering a simple, analytically transparent, and robust approach for high-fidelity single-qubit control. The second protocol combines phase-shifted flux and charge pulse sequences to enhance the resonant drive and reduce the gate duration. Multilevel simulations demonstrate single-qubit gate fidelities above $99.99\%$; the simpler protocol remains robust under moderate variations of qubit parameters and flux bias, while the combined protocol preserves high fidelity while substantially accelerating the gate. These results establish SFQ-based cryogenic control as a realistic route to fast, accurate, and scalable manipulation of fluxonium qubits.

DOI
10.1103/3fwq-zn71

Related papers

Optimization of High-Fidelity Single-Qubit Gates for Fluxoniums Using Single-Flux Quantum Control

Maxime Lapointe-Major, Boyan Torosov, Bohdan Kulchytskyy +1 more

We present a gradient-based method to construct memory-efficient, high-fidelity, single-qubit gates for fluxonium qubits. These gates are constructed using a sequence of single-flux quantum (SFQ) pulses that are sent to the qubit through either capacitive or inductive coupling. The schedule of SFQ pulses is constructed with an on-ramp and an off-ramp applied prior to and after a pulse train, where the pulses are spaced at intervals equal to the qubit period. We reduce the optimization problem to the scheduling of a fixed number of SFQ pulses in the on-ramp and solve it by relaxing the discretization constraint of the SFQ clock as an intermediate step, allowing the use of the Broyden-Fletcher-Goldfarb-Shanno optimizer. Using this approach, gate fidelities of 99.99 % can be achieved for inductive coupling and 99.9 % for capacitive coupling, with leakage being the main source of coherent errors for both approaches.

quant-pharXiv:2511.14746•Physical Review Applied•Nov 19, 2025•1 citation

Coherence-limited digital control of a superconducting qubit using a Josephson pulse generator at 3 K

M. A. Castellanos-Beltran, A. J. Sirois, L. Howe +4 more

Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime $T_1$, coherence time $T_2^*$ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for $T_1$ and $T_2^*$, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of $0.46$% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.

quant-pharXiv:2512.07962•Applied Physics Letters•Dec 10, 2025•13 citations

Dense Encoding of Single-Flux-Quantum Pulse Sequences for High-Performance Qubit Control

Re-Bing Wu

Superconducting quantum computing faces scalability challenges due to the complexity and thermal load of microwave control systems. Single-Flux-Quantum (SFQ) technology offers a low-power alternative using picosecond voltage pulses. However, storing SFQ pulse sequences on-chip introduces a trade-off among storage, fidelity, and gate speed. We propose a dense encoding scheme—inspired by microwave control—that reduces storage needs and enhances effective control power, thereby speeding up operations. Our results show that dense encoding accelerates gates via constructive pulse interference. This work highlights encoding as a key design principle for scalable quantum control.

IEEE International Conference on Quantum Control, Computing and Learning (qCCL)•Jun 1, 2026•0 citations

Comparative study of high-$J_{c}$ and low-$J_{c}$ SFQ microwave generators for transmon control

Hongxiang Shen, Wenhui Luo, Nobuyuki Yoshikawa

Abstract Scalability of superconducting quantum processors is increasingly constrained by the thermal load and wiring overhead associated with room-temperature control hardware. Cryogenic control interfaces based on single-flux-quantum (SFQ) logic offer a potential route to alleviating these bottlenecks, although their dissipation depends sensitively on the Josephson-junction critical current and the underlying fabrication process. In this work, we comparatively investigate SFQ-synthesized microwave generators implemented in high- and low-critical-current processes, and evaluate their suitability for transmon qubit control through a combination of experimental characterization and hybrid QuTiP–JoSIM analysis. By modulating SFQ pulse intervals, we synthesize coherent microwave drives and obtain single-qubit gate fidelities above 99.9% at 10 mK in QuTiP-based simulations for both implementations. The low- $J_{\mathrm{c}}$ J c implementation exhibits reduced phase-noise-induced error, achieves higher gate fidelity within its valid bias window, and shows improved robustness against frequency detuning, while the high- $J_{\mathrm{c}}$ J c implementation maintains a lower broadband noise floor. Using an explicit model of thermal dissipation and circuit footprint, we further estimate the integration limits of cryogenic control channels. The results show that reducing the switching current substantially relaxes the cooling-budget constraint and increases the number of channels that can be deployed simultaneously. These results clarify the trade-offs associated with implementing SFQ microwave generators in different fabrication processes and provide practical guidance for the design of scalable cryogenic qubit-control interfaces.

EPJ Quantum Technology•Apr 24, 2026•1 citation

Speeding up qubit control with bipolar single-flux-quantum pulse sequences

V. A. Vozhakov, M. V. Bastrakova, N. V. Klenov +2 more

Abstract The development of quantum computers based on superconductors requires the improvement of the qubit state control approach aimed at the increase of the hardware energy efficiency. A promising solution to this problem is the use of superconducting digital circuits operating with single-flux-quantum (SFQ) pulses, moving the qubit control system into the cold chamber. However, the qubit gate time under SFQ control is still longer than under conventional microwave driving. Here we introduce the bipolar SFQ pulse control based on ternary pulse sequences. We also develop a robust optimization algorithm for finding a sequence structure that minimizes the leakage of the transmon qubit state from the computational subspace. We show that the appropriate sequence can be found for arbitrary system parameters from the practical range. The proposed bipolar SFQ control reduces a single qubit gate time by halve compared to nowadays unipolar SFQ technique, while maintaining the gate fidelity over 99.99%.

arXiv:2310.11484•Quantum Science and Technology•May 30, 2023•17 citations

Unified Flux Control Architecture for Fluxonium Qubits

Xianchuang Pan, Jiahui Wang, Tao Zhou +14 more

Control architectures that reduce hardware overhead while maintaining high-fidelity operations are essential for the continued scaling of superconducting quantum processors. Here we experimentally realize a unified control architecture for fluxonium qubits, in which both transverse ($XY$) and longitudinal ($Z$) operations are implemented through a single flux-control channel driven by a single arbitrary waveform generator channel. This architecture imposes competing requirements on the shared control channel, which must simultaneously support low-frequency flux transmission for reset operations while strongly attenuating broadband noise near the qubit transition frequency. We address this challenge through frequency-selective cryogenic filtering together with compensated waveform synthesis that corrects the pulse distortion introduced by the filtered control line. Experimentally, this approach preserves coherence times above 100 $μ$s while enabling active reset with approximately 98% fidelity and 20-ns single-qubit gates with fidelities exceeding 99.99%. We further demonstrate FPGA-native instruction-level waveform synthesis based on reusable pulse primitives for unified flux control. These results establish unified flux control as a scalable architecture for fluxonium qubits that reduces control hardware overhead while preserving high-fidelity operation.

quant-pharXiv:2605.25948•May 26, 2026•0 citations
We develop a control strategy for fluxonium qubits based on picosecond single-flux-quantum (SFQ) pulses generated by Josephson digital circuits. A major challenge is that SFQ protocols originally designed for transmon control become inefficient for low-frequency fluxonium. In this regime, the asymmetry of flux and charge couplings leads either to excessive leakage or excessively long gate times. We show that this limitation can be overcome by two complementary protocols. The first protocol employs high-frequency SFQ pulse packets applied through the flux channel, offering a simple, analytically transparent, and robust approach for high-fidelity single-qubit control. The second protocol combines phase-shifted flux and charge pulse sequences to enhance the resonant drive and reduce the gate duration. Multilevel simulations demonstrate single-qubit gate fidelities above 99.99%99.99\%99.99%; the simpler protocol remains robust under moderate variations of qubit parameters and flux bias, while the combined protocol preserves high fidelity while substantially accelerating the gate. These results establish SFQ-based cryogenic control as a realistic route to fast, accurate, and scalable manipulation of fluxonium qubits.
We present a gradient-based method to construct memory-efficient, high-fidelity, single-qubit gates for fluxonium qubits. These gates are constructed using a sequence of single-flux quantum (SFQ) pulses that are sent to the qubit through either capacitive or inductive coupling. The schedule of SFQ pulses is constructed with an on-ramp and an off-ramp applied prior to and after a pulse train, where the pulses are spaced at intervals equal to the qubit period. We reduce the optimization problem to the scheduling of a fixed number of SFQ pulses in the on-ramp and solve it by relaxing the discretization constraint of the SFQ clock as an intermediate step, allowing the use of the Broyden-Fletcher-Goldfarb-Shanno optimizer. Using this approach, gate fidelities of 99.99 % can be achieved for inductive coupling and 99.9 % for capacitive coupling, with leakage being the main source of coherent errors for both approaches.
Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime T1T_1T1​, coherence time T2∗T_2^*T2∗​ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for T1T_1T1​ and T2∗T_2^*T2∗​, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of 0.460.460.46% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.
Superconducting quantum computing faces scalability challenges due to the complexity and thermal load of microwave control systems. Single-Flux-Quantum (SFQ) technology offers a low-power alternative using picosecond voltage pulses. However, storing SFQ pulse sequences on-chip introduces a trade-off among storage, fidelity, and gate speed. We propose a dense encoding scheme—inspired by microwave control—that reduces storage needs and enhances effective control power, thereby speeding up operations. Our results show that dense encoding accelerates gates via constructive pulse interference. This work highlights encoding as a key design principle for scalable quantum control.
Comparative study of high-JcJ_{c}Jc​ and low-JcJ_{c}Jc​ SFQ microwave generators for transmon control
Abstract Scalability of superconducting quantum processors is increasingly constrained by the thermal load and wiring overhead associated with room-temperature control hardware. Cryogenic control interfaces based on single-flux-quantum (SFQ) logic offer a potential route to alleviating these bottlenecks, although their dissipation depends sensitively on the Josephson-junction critical current and the underlying fabrication process. In this work, we comparatively investigate SFQ-synthesized microwave generators implemented in high- and low-critical-current processes, and evaluate their suitability for transmon qubit control through a combination of experimental characterization and hybrid QuTiP–JoSIM analysis. By modulating SFQ pulse intervals, we synthesize coherent microwave drives and obtain single-qubit gate fidelities above 99.9% at 10 mK in QuTiP-based simulations for both implementations. The low- JcJ_{\mathrm{c}}Jc​ J c implementation exhibits reduced phase-noise-induced error, achieves higher gate fidelity within its valid bias window, and shows improved robustness against frequency detuning, while the high- JcJ_{\mathrm{c}}Jc​ J c implementation maintains a lower broadband noise floor. Using an explicit model of thermal dissipation and circuit footprint, we further estimate the integration limits of cryogenic control channels. The results show that reducing the switching current substantially relaxes the cooling-budget constraint and increases the number of channels that can be deployed simultaneously. These results clarify the trade-offs associated with implementing SFQ microwave generators in different fabrication processes and provide practical guidance for the design of scalable cryogenic qubit-control interfaces.
Abstract The development of quantum computers based on superconductors requires the improvement of the qubit state control approach aimed at the increase of the hardware energy efficiency. A promising solution to this problem is the use of superconducting digital circuits operating with single-flux-quantum (SFQ) pulses, moving the qubit control system into the cold chamber. However, the qubit gate time under SFQ control is still longer than under conventional microwave driving. Here we introduce the bipolar SFQ pulse control based on ternary pulse sequences. We also develop a robust optimization algorithm for finding a sequence structure that minimizes the leakage of the transmon qubit state from the computational subspace. We show that the appropriate sequence can be found for arbitrary system parameters from the practical range. The proposed bipolar SFQ control reduces a single qubit gate time by halve compared to nowadays unipolar SFQ technique, while maintaining the gate fidelity over 99.99%.
Control architectures that reduce hardware overhead while maintaining high-fidelity operations are essential for the continued scaling of superconducting quantum processors. Here we experimentally realize a unified control architecture for fluxonium qubits, in which both transverse (XYXYXY) and longitudinal (ZZZ) operations are implemented through a single flux-control channel driven by a single arbitrary waveform generator channel. This architecture imposes competing requirements on the shared control channel, which must simultaneously support low-frequency flux transmission for reset operations while strongly attenuating broadband noise near the qubit transition frequency. We address this challenge through frequency-selective cryogenic filtering together with compensated waveform synthesis that corrects the pulse distortion introduced by the filtered control line. Experimentally, this approach preserves coherence times above 100 μμμs while enabling active reset with approximately 98% fidelity and 20-ns single-qubit gates with fidelities exceeding 99.99%. We further demonstrate FPGA-native instruction-level waveform synthesis based on reusable pulse primitives for unified flux control. These results establish unified flux control as a scalable architecture for fluxonium qubits that reduces control hardware overhead while preserving high-fidelity operation.