Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.09713

Shaping Frequency-Bin Biphoton Correlations via Programmable Optical Frequency Combs

Usman Khan, Daniel López, Venkat Padmasola, Nirmal Dangi, Santosh Kumar, Yuping Huang

Published Nov 6, 2026• 0 citations
arXivHTMLPDF

Abstract

Programmable shaping of photon-pair spectral correlations is important for frequency-bin quantum information processing. However, achieving this control remains challenging in nonlinear optical systems without reliable forward models. Here, we demonstrate model-free, hardware-in-the-loop shaping of the measured joint spectral intensity of a cascaded photon-pair source driven by a programmable optical frequency comb. A blockwise simultaneous perturbation stochastic approximation controller optimizes up to 22 pump, signal, and idler parameters. Each iteration requires only two accepted hardware evaluations, independent of the parameter count. The controller converges to diverse target patterns on 3$\times$3, 4$\times$4, and 5$\times$5 frequency-bin grids. The optimized distributions achieve Pearson correlations between 0.66 and 0.98 and classical overlap fidelities between 0.32 and 0.62. Cross-target similarity analysis confirms that the optimized patterns remain target-specific. Source characterization yields a maximum coincidence-to-accidental ratio of approximately 585. Accuracy is limited by pump-phase transfer, parasitic nonlinear background, waveshaper constraints, amplitude-only filtering, and measurement noise. Joint spectral intensity contains no spectral-phase information. Therefore, the results demonstrate control of measured frequency-bin populations and correlations, not complete reconstruction of the two-photon state. Phase-sensitive characterization is required to verify inter-bin coherence and quantify the entanglement dimensionality of the output state. Our results establish direct measurement feedback as a practical approach to reconfigurable frequency-bin correlation engineering when an accurate end-to-end model is unavailable.

DOI
10.48550/arxiv.2611.09713

Related papers

Optical Signal Processing for Manipulating and Characterizing Time-Frequency Entangled Photons

Ogaga D. Odele

Time-frequency entangled photons ("biphotons") exhibit joint spectral and temporal correlations that are unattainable with classical light. Besides being deployed for tests of quantum nonlocality, these photonic states are desirable for a unique range of applications that can significantly impact communications and computation. In this dissertation, we describe novel schemes based on spectral and temporal domain processing for manipulating and characterizing broadband biphotons. Implementing frequency-dependent filters, first, we present and demonstrate a technique for controlling the relative delay between a pair of entangled photons, relying on pump frequency tuning and the quantum concept of nonlocal dispersion cancellation. Next, we demonstrate near-field frequency-to-time mapping, a technique adopted from classical photonics, for arbitrary control of biphoton temporal correlations. Subsequently, we generate temporal correlation trains by creating biphoton frequency combs through programmable spectral amplitude shaping and demonstrate the temporal Talbot effect with entangled photons for the first time. Moreover, in the absence of fast single-photon detectors, we show how electro-optic phase modulation (originally a time-dependent operation) can be used to examine the coherence of biphoton frequency combs. Lastly, we introduce a scheme based on electro-optic intensity modulation, another time-domain operation, for improving the resolution in biphoton temporal correlation measurements. Overall, our body of work could provide additional insight into the manipulation and characterization of biphoton states, as well as contribute towards the improvement of quantum technologies.

•Jan 1, 2018•0 citations

Two-dimensional control of a biphoton joint spectrum

Anatoly Shukhin, Inbar Hurvitz, Sivan Trajtenberg‐Mills +2 more

Control over the joint spectral amplitude of a photon pair has proved highly desirable for many quantum applications, since it contains the spectral quantum correlations, and has crucial effects on the indistinguishability of photons, as well as promising emerging applications involving complex quantum functions and frequency encoding of qudits. Until today, this has been achieved by engineering a single degree of freedom, either by custom poling nonlinear crystal or by shaping the pump pulse. We present a combined approach where two degrees of freedom, the phase-matching function, and the pump spectrum, are controlled. This approach enables the two-dimensional control of the joint spectral amplitude, generating a variety of spectrally encoded quantum states - including frequency uncorrelated states, frequency-bin Bell states, and biphoton qudit states. In addition, the joint spectral amplitude is controlled by photon bunching and anti-bunching, reflecting the symmetry of the phase-matching function.

arXiv:2311.09660•Optics Express•Jan 12, 2024•22 citations

Programmable photon pair source

Liang Cui, Jinjin Wang, Jiamin Li +3 more

Photon pairs produced by the pulse-pumped nonlinear parametric processes have been a workhorse of quantum information science (QIS). Engineering the spectral property of quantum states is crucial for practical QIS applications. However, photon pairs with desirable spectral properties are currently achieved with specially engineered optical hardware but with severely limited flexibility in tuning the spectral properties of the sources. Here, we demonstrate a spectrally programmable photon pair source by exploiting a two-stage nonlinear interferometer scheme with a computer-controlled phase device. The phase-control device can introduce phase shifts for spectral engineering by a programmable phase function that can be arbitrarily defined. When the phase function is properly designed, the output spectrum of the source can be freely customized and changed without replacing any hardware component in the system. Using this approach, we are able to program photon pairs with factorable positively correlated and negatively correlated spectra. In addition, we also realize a source of multi-dimensional three-channel spectrally factorable photon pairs. Our investigation provides a flexible and powerful new approach for engineering the mode profile of photon pairs and should find wide applications in QIS.

arXiv:2108.01400•APL Photonics•Jan 1, 2022•9 citations

Generation and characterization of a frequency anti-correlated entangled biphoton source at 1560nm

A. Hou Feiyan, B. Dong Ruifang, C. Xiang Xiao +6 more

We report the generation and characterization of a frequency anti-correlated entangled biphoton source at the wavelength of 1560nm via a continuous-wave laser pumped spontaneous parametric down-conversion process. The spectra of the signal and idler photons are measured to have their center wavelength being 1559.7nm and 1559.8nm while their 3-dB bandwidths being 3.2nm and 3.15nm respectively. The joint spectrum of the photon pair is observed to be frequency anti-correlated and have a spectral bandwidth of 0.5nm. According to the ratio of the single-photon spectral bandwidth to the joint spectral bandwidth of the photon pairs, the degree of frequency entanglement is quantified to be 6.4. By investigating the relative overlap between the achieved two-photon spectral intensity function and its transpose, the spectral indisinguishablity of the photon pairs is expected to be 90%. Based on a HOM interferometric coincidence measurement setup, a visibility of 89.8% is demonstrated, which shows a good agreement with the expectation.

Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR)•Aug 1, 2015•0 citations

Generation and Coherent Control of Pulsed Quantum Frequency Combs

Benjamin MacLellan, Piotr Roztocki, Michael Kues +12 more

We present a method for the generation and coherent manipulation of pulsed quantum frequency combs. Until now, methods of preparing high-dimensional states on-chip in a practical way have remained elusive due to the increasing complexity of the quantum circuitry needed to prepare and process such states. Here, we outline how high-dimensional, frequency-bin entangled, two-photon states can be generated at a stable, high generation rate by using a nested-cavity, actively mode-locked excitation of a nonlinear micro-cavity. This technique is used to produce pulsed quantum frequency combs. Moreover, we present how the quantum states can be coherently manipulated using standard telecommunications components such as programmable filters and electro-optic modulators. In particular, we show in detail how to accomplish state characterization measurements such as density matrix reconstruction, coincidence detection, and single photon spectrum determination. The presented methods form an accessible, reconfigurable, and scalable foundation for complex high-dimensional state preparation and manipulation protocols in the frequency domain.

Journal of Visualized Experiments•Jun 8, 2018•12 citations

Spectral characterization of photon-pair sources via classical sum-frequency generation

Fumihiro Kaneda, Jo Oikawa, Masahiro Yabuno +5 more

Tailoring spectral properties of photon pairs is of great importance for optical quantum information and measurement applications. High-resolution spectral measurement is a key technique for engineering spectral properties of photons, making them ideal for various quantum applications. Here we demonstrate spectral measurements and optimization of frequency-entangled photon pairs produced via spontaneous parametric downconversion (SPDC), utilizing frequency-resolved sum-frequency generation (SFG), the reverse process of SPDC. A joint phase-matching spectrum of a nonlinear crystal around 1580 nm is captured with a 40 pm resolution and a > 40 dB signal-to-noise ratio, which is significantly improved compared to traditional frequency-resolved coincidence measurements. Moreover, our scheme is applicable to collinear degenerate sources whose characterization is difficult with previously demonstrated stimulated difference frequency generation (DFG). We also illustrate that the observed phase-matching function is useful for finding an optimal pump spectrum to maximize the spectral indistinguishability of SPDC photons. We expect that our precise spectral characterization technique will be useful tool for characterizing and tailoring SPDC sources for a wide range of optical quantum applications.

arXiv:2010.07678•Optics Express•Nov 30, 2020•15 citations
Programmable shaping of photon-pair spectral correlations is important for frequency-bin quantum information processing. However, achieving this control remains challenging in nonlinear optical systems without reliable forward models. Here, we demonstrate model-free, hardware-in-the-loop shaping of the measured joint spectral intensity of a cascaded photon-pair source driven by a programmable optical frequency comb. A blockwise simultaneous perturbation stochastic approximation controller optimizes up to 22 pump, signal, and idler parameters. Each iteration requires only two accepted hardware evaluations, independent of the parameter count. The controller converges to diverse target patterns on 3×\times×3, 4×\times×4, and 5×\times×5 frequency-bin grids. The optimized distributions achieve Pearson correlations between 0.66 and 0.98 and classical overlap fidelities between 0.32 and 0.62. Cross-target similarity analysis confirms that the optimized patterns remain target-specific. Source characterization yields a maximum coincidence-to-accidental ratio of approximately 585. Accuracy is limited by pump-phase transfer, parasitic nonlinear background, waveshaper constraints, amplitude-only filtering, and measurement noise. Joint spectral intensity contains no spectral-phase information. Therefore, the results demonstrate control of measured frequency-bin populations and correlations, not complete reconstruction of the two-photon state. Phase-sensitive characterization is required to verify inter-bin coherence and quantify the entanglement dimensionality of the output state. Our results establish direct measurement feedback as a practical approach to reconfigurable frequency-bin correlation engineering when an accurate end-to-end model is unavailable.
Time-frequency entangled photons ("biphotons") exhibit joint spectral and temporal correlations that are unattainable with classical light. Besides being deployed for tests of quantum nonlocality, these photonic states are desirable for a unique range of applications that can significantly impact communications and computation. In this dissertation, we describe novel schemes based on spectral and temporal domain processing for manipulating and characterizing broadband biphotons. Implementing frequency-dependent filters, first, we present and demonstrate a technique for controlling the relative delay between a pair of entangled photons, relying on pump frequency tuning and the quantum concept of nonlocal dispersion cancellation. Next, we demonstrate near-field frequency-to-time mapping, a technique adopted from classical photonics, for arbitrary control of biphoton temporal correlations. Subsequently, we generate temporal correlation trains by creating biphoton frequency combs through programmable spectral amplitude shaping and demonstrate the temporal Talbot effect with entangled photons for the first time. Moreover, in the absence of fast single-photon detectors, we show how electro-optic phase modulation (originally a time-dependent operation) can be used to examine the coherence of biphoton frequency combs. Lastly, we introduce a scheme based on electro-optic intensity modulation, another time-domain operation, for improving the resolution in biphoton temporal correlation measurements. Overall, our body of work could provide additional insight into the manipulation and characterization of biphoton states, as well as contribute towards the improvement of quantum technologies.
Control over the joint spectral amplitude of a photon pair has proved highly desirable for many quantum applications, since it contains the spectral quantum correlations, and has crucial effects on the indistinguishability of photons, as well as promising emerging applications involving complex quantum functions and frequency encoding of qudits. Until today, this has been achieved by engineering a single degree of freedom, either by custom poling nonlinear crystal or by shaping the pump pulse. We present a combined approach where two degrees of freedom, the phase-matching function, and the pump spectrum, are controlled. This approach enables the two-dimensional control of the joint spectral amplitude, generating a variety of spectrally encoded quantum states - including frequency uncorrelated states, frequency-bin Bell states, and biphoton qudit states. In addition, the joint spectral amplitude is controlled by photon bunching and anti-bunching, reflecting the symmetry of the phase-matching function.
Photon pairs produced by the pulse-pumped nonlinear parametric processes have been a workhorse of quantum information science (QIS). Engineering the spectral property of quantum states is crucial for practical QIS applications. However, photon pairs with desirable spectral properties are currently achieved with specially engineered optical hardware but with severely limited flexibility in tuning the spectral properties of the sources. Here, we demonstrate a spectrally programmable photon pair source by exploiting a two-stage nonlinear interferometer scheme with a computer-controlled phase device. The phase-control device can introduce phase shifts for spectral engineering by a programmable phase function that can be arbitrarily defined. When the phase function is properly designed, the output spectrum of the source can be freely customized and changed without replacing any hardware component in the system. Using this approach, we are able to program photon pairs with factorable positively correlated and negatively correlated spectra. In addition, we also realize a source of multi-dimensional three-channel spectrally factorable photon pairs. Our investigation provides a flexible and powerful new approach for engineering the mode profile of photon pairs and should find wide applications in QIS.
We report the generation and characterization of a frequency anti-correlated entangled biphoton source at the wavelength of 1560nm via a continuous-wave laser pumped spontaneous parametric down-conversion process. The spectra of the signal and idler photons are measured to have their center wavelength being 1559.7nm and 1559.8nm while their 3-dB bandwidths being 3.2nm and 3.15nm respectively. The joint spectrum of the photon pair is observed to be frequency anti-correlated and have a spectral bandwidth of 0.5nm. According to the ratio of the single-photon spectral bandwidth to the joint spectral bandwidth of the photon pairs, the degree of frequency entanglement is quantified to be 6.4. By investigating the relative overlap between the achieved two-photon spectral intensity function and its transpose, the spectral indisinguishablity of the photon pairs is expected to be 90%. Based on a HOM interferometric coincidence measurement setup, a visibility of 89.8% is demonstrated, which shows a good agreement with the expectation.
We present a method for the generation and coherent manipulation of pulsed quantum frequency combs. Until now, methods of preparing high-dimensional states on-chip in a practical way have remained elusive due to the increasing complexity of the quantum circuitry needed to prepare and process such states. Here, we outline how high-dimensional, frequency-bin entangled, two-photon states can be generated at a stable, high generation rate by using a nested-cavity, actively mode-locked excitation of a nonlinear micro-cavity. This technique is used to produce pulsed quantum frequency combs. Moreover, we present how the quantum states can be coherently manipulated using standard telecommunications components such as programmable filters and electro-optic modulators. In particular, we show in detail how to accomplish state characterization measurements such as density matrix reconstruction, coincidence detection, and single photon spectrum determination. The presented methods form an accessible, reconfigurable, and scalable foundation for complex high-dimensional state preparation and manipulation protocols in the frequency domain.
Tailoring spectral properties of photon pairs is of great importance for optical quantum information and measurement applications. High-resolution spectral measurement is a key technique for engineering spectral properties of photons, making them ideal for various quantum applications. Here we demonstrate spectral measurements and optimization of frequency-entangled photon pairs produced via spontaneous parametric downconversion (SPDC), utilizing frequency-resolved sum-frequency generation (SFG), the reverse process of SPDC. A joint phase-matching spectrum of a nonlinear crystal around 1580 nm is captured with a 40 pm resolution and a > 40 dB signal-to-noise ratio, which is significantly improved compared to traditional frequency-resolved coincidence measurements. Moreover, our scheme is applicable to collinear degenerate sources whose characterization is difficult with previously demonstrated stimulated difference frequency generation (DFG). We also illustrate that the observed phase-matching function is useful for finding an optimal pump spectrum to maximize the spectral indistinguishability of SPDC photons. We expect that our precise spectral characterization technique will be useful tool for characterizing and tailoring SPDC sources for a wide range of optical quantum applications.