Continuous-variable quantum key distribution utilizes advanced digital signal processing techniques to mitigate channel impairments, driving the progress of high-performance quantum secure communications. Specifically, digital heterodyne receivers are commonly implemented using down-conversion algorithms to detect both components simultaneously where the signal is modulated onto an intermediate frequency to avoid low-frequency noise and bypass stringent optical phase-locking requirements. However, a rigorous analysis of the quantum security implications of the digital down-conversion algorithm remains absent. In this paper, we investigate the algorithm process from the perspective of quantum operator evolution, revealing that the frequency folding effect inherent in down-conversion inevitably mixes the image-frequency information into the baseband signal. To address this issue, we propose a novel operator reconstruction detection scheme based on dual-path digital heterodyne receiver. By performing a non-equal weighted combination of the output operators along two optical paths in the digital domain, this scheme perfectly cancels out the image-frequency operator physically. The robust receiver architecture preserves the baseband noise-suppression advantages, inherently achieves perfect mode balancing for asymmetric optical detection losses, and fundamentally closes the image-frequency crosstalk. Practical experiments have validated the feasibility of the proposed architecture and its effective suppression of image-frequency noise, achieving a performance of 11.4 Mbps @ 42 km. This work lays a solid theoretical and algorithmic foundation for future high-performance, highly secure digital continuous-variable quantum key distribution systems.
Continuous-variable quantum key distribution utilizes advanced digital signal processing techniques to mitigate channel impairments, driving the progress of high-performance quantum secure communications. Specifically, digital heterodyne receivers are commonly implemented using down-conversion algorithms to detect both components simultaneously where the signal is modulated onto an intermediate frequency to avoid low-frequency noise and bypass stringent optical phase-locking requirements. However, a rigorous analysis of the quantum security implications of the digital down-conversion algorithm remains absent. In this paper, we investigate the algorithm process from the perspective of quantum operator evolution, revealing that the frequency folding effect inherent in down-conversion inevitably mixes the image-frequency information into the baseband signal. To address this issue, we propose a novel operator reconstruction detection scheme based on dual-path digital heterodyne receiver. By performing a non-equal weighted combination of the output operators along two optical paths in the digital domain, this scheme perfectly cancels out the image-frequency operator physically. The robust receiver architecture preserves the baseband noise-suppression advantages, inherently achieves perfect mode balancing for asymmetric optical detection losses, and fundamentally closes the image-frequency crosstalk. Practical experiments have validated the feasibility of the proposed architecture and its effective suppression of image-frequency noise, achieving a performance of 11.4 Mbps @ 42 km. This work lays a solid theoretical and algorithmic foundation for future high-performance, highly secure digital continuous-variable quantum key distribution systems.
Digital signal processing technology has paved the way for the realization of high-speed continuous-variable quantum key distribution systems. However, existing security proofs are limited to static digital signal processing algorithms, while practical systems rely on dynamic multiple-input multiple-output algorithms to compensate for time-varying channel impairments. Our analysis reveals that the conventional dynamic algorithm, due to its non-unitary nature, systematically underestimates the excess noise, which in turn leads to security issues and the generation of insecure keys. To close this gap, we propose a secure algorithm model, mapping the dynamic algorithm to an equivalent physical optical model whose security can be rigorously assessed. Simulations illustrate the algorithm's non-unitary property and provide a quantitative analysis of the excess noise underestimation caused by the conventional algorithm. We further experimentally validate the necessity of the proposed modeling for dynamic digital signal processing, achieving a secret key rate of 14.4 Mbps based on estimated excess noise of 0.07 shot noise unit; whereas the conventional algorithm would have dangerously overestimated the key rate to 28.2 Mbps with noise of 0.008 shot noise unit. This work provides the essential security framework for dynamic digital signal processing, overcoming a critical impediment for the development of high-performance continuous-variable quantum key distribution systems.
Continuous-Variable Quantum Key Distribution (CV-QKD) is a form of quantum cryptography that encodes information in the amplitude and phase of light, enabling provably secure key sharing over optical channels. Building on previous research, subcarrier multiplexing configurations have been proposed to allow a quantum channel and a classical data channel to share a single optical carrier and transmitter. In these schemes, advanced Digital Signal Processing (DSP) enables the high Signal-to-Noise Ratio (SNR) classical signal to serve as a phase reference for the quantum channel, facilitating phase recovery without dedicated pilot tones. This thesis integrates these concepts into a complete system architecture that combines CV-QKD with One-Time Pad encrypted communication over a single fiber and transmitter, bringing practical implementation closer to a scenario where classical and quantum communication modes can be selected purely via software. A detailed link-budget analysis quantifies trade-offs between classical and quantum data rates and ensures sufficient bandwidth for essential post-processing tasks such as reverse reconciliation and parameter estimation.Beyond system integration and experimental improvements, this work rigorously addresses practical security. Three contributions enhance parameter estimation under realistic conditions. First, the Multi-Level Parameter Estimation scheme allows continuous receiver-noise calibration via an intensity modulator without interrupting key generation, significantly increasing throughput. Second, a DSP-induced mode mismatch is characterized: the receiver's digital filters and hardware response define the measured quantum mode, which may deviate from the sender's calibration and bias critical parameter estimation. Third, the Time-Gated Variance formalism quantifies calibrations in the presence of realistic non-white noise, accounting for the impact of calibration duration on variance estimation. Together, these methods provide a more accurate, quantitative foundation for assessing transmittance and excess noise, improving both security and performance.Although demonstrated on a single-fiber, subcarrier-multiplexed system, these techniques are broadly applicable to other CV-QKD architectures. By combining such system designs with rigorous, quantitative analysis of noise calibrations, this thesis takes a step toward scalable, certifiable quantum-secured communication, bridging the gap between theoretical security and real-world deployment.
Continuous-variable quantum key distribution (CV-QKD) is a promising solution for providing high secure key rates in moderate loss channels. A great advantage with respect to discrete-variable (DV) systems is the use of a technology similar to the one used in classical coherent communication, in particular for the detection system, which can operate at room temperature and benefits from an easier integration process. In addition to this, the use of advanced digital signal processing (DSP) techniques developed for classical communication allows for bandwidth-efficient temporal shaping, which optimizes the performance of the CV-QKD system. These techniques applied to the detected signal are also fundamental for using a locally generated local oscillator, correcting frequency and phase differences using frequency-multiplexed pilots generated by the transmitter. In this presentation, we will describe how these DSP techniques can be applied to a CV-QKD system and show some recent experimental results obtained by our research group, including results for a receiver based on a Photonic Integrated Circuit (PIC).
Continuous-variable quantum key distribution (CV-QKD) enables two remote parties to establish information-theoretically secure keys and offers high practical feasibility due to its compatibility with mature coherent optical communication technologies. However, as CV-QKD systems progress toward digital implementations, device nonidealities drive the optical field from a single-mode to a continuous-mode region, thereby underscoring the mismatch between theoretical models and practical systems. Here, we introduce temporal modes to construct an entanglement-based scheme that more accurately captures device nonidealities and develop a corresponding secret key rate calculation method applicable to continuous-mode scenarios. We demonstrate that optimizing the pulse-shaping format can significantly improve performance under detector-bandwidth-limited conditions. Experimental results also confirm that the proposed model effectively describes the impact of sampling-time deviations. We further analyze a linear weighted-reconstruction digital signal processing method,which improves the secret key rate by approximately 50% in a 30-km fiber experiment without requiring additional hardware, demonstrating a substantial performance enhancement at metropolitan distances. The proposed theoretical framework accommodates a broader range of experimental conditions and can guide the optimization of digital CV-QKD systems.
Abstract Distributing cryptographic keys over public channels in a way that can provide information-theoretic security is the holy grail for secure communication. This can be achieved by exploiting quantum mechanical principles in so-called quantum key distribution (QKD). Continuous-variable (CV) QKD based on coherent states, in particular, is an attractive scheme for secure communication since it requires only standard telecommunication technology that can operate at room temperature. However, a recently discovered side-channel created in the process of state preparation leads to a leakage of information about the transmitted quantum state, opening a security loophole for eavesdroppers to compromise the security of the CVQKD system. Here, we present a CVQKD system without this modulation leakage vulnerability. Our implementation is based on a baseband modulation approach and uses an in-phase and quadrature (IQ) modulator for state preparation and radio frequency heterodyne detection together with carefully designed digital signal processing for state measurement. We consider practical aspects in the implementation and demonstrate the generation of a composable secret key secure against collective attacks. This work is a step towards protecting CVQKD systems against practical imperfections of physical devices and operational limitations without performance degradation.
Continuous-variable quantum key distribution (CV-QKD) using coherent states and heterodyne detection enables secure quantum communication based on technology that has large similarities to coherent optical telecommunication. Yet, practical implementations of coherent receivers used in both technologies encounter device imperfections, which for CV-QKD are often not addressed in security proofs. Here, we present a theoretical framework that rigorously accounts for imperfect heterodyne measurements arising from phase and amplitude imbalances in the coherent (heterodyne) receiver. Focusing on collective attacks, we establish a finite-size security proof that reveals how measurement imperfections limit the distance over which a positive key rate is achievable. To mitigate these effects, we propose a local transformation during classical post-processing. We validate our approach experimentally on a CV-QKD system with an imperfect coherent receiver, underscoring its potential for scalable, cost-effective CV-QKD with photonic integrated receivers in which phase and amplitude imbalances naturally appear through manufacturing tolerances.