Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.09666

Geodesic-based optimal control for leakage suppression in superconducting qubits

Adonai Hilário da Silva, Tanmoy Pandit, Francesco Cosco

quant-phSubmitted Oct 7, 2026• Announced Oct 8, 2026• 0 citations
arXivHTMLPDF

Abstract

Superconducting qubits are often based on the first two energy levels of a physical anharmonic LC oscillator. Since the anharmonicity of such systems is usually much lower than the involved energy gaps, population can easily leak to higher energy states. This is what characterizes leakage errors, and it can have multiple sources: from coherent error induced by the control platform to incoherent thermal dissipation. In this work, we adapt an optimal control method based on sub-Riemannian geodesic search in the unitary group for a system consisting of two superconducting qubits with leakage levels. We use the $R_x(π/2)$ rotation for single-qubit operation analysis, and the $i$SWAP operation for two-qubit analysis. For the former, we find considerable performance improvement in average gate fidelity as well as in the reduction of leakage errors when comparing the obtained optimal pulses with Gaussian and DRAG pulses, especially for short duration pulses. For the $i$SWAP gate, although leakage error remains roughly the same, we manage to obtain considerably higher fidelities with the cost of requiring a slightly longer time evolution.

Comments
16 pages, 6 figures

Related papers

Leakage reduction in fast superconducting qubit gates via optimal control

M. Werninghaus, D. J. Egger, F. Roy +3 more

Abstract Reaching high-speed, high-fidelity qubit operations requires precise control over the shape of the underlying pulses. For weakly anharmonic systems, such as superconducting transmon qubits, short gates lead to leakage to states outside of the computational subspace. Control pulses designed with open-loop optimal control may reduce such leakage. However, model inaccuracies can severely limit the usability of such pulses. We implemented a closed-loop optimization that simultaneously adapts all control parameters based on measurements of a cost function built from Clifford gates. We directly optimize the amplitude and phase of each sample point of the digitized control pulse. We thereby fully exploit the capabilities of the pulse generation electronics and create a 4.16 ns single-qubit pulse with 99.76 % fidelity and 0.044 % leakage. This is a sevenfold reduction of the leakage rate and a threefold reduction in standard errors of the best DRAG pulse we have calibrated at such short durations on the same system.

arXiv:2003.05952•npj Quantum Information•Jan 29, 2021•192 citations

Reducing Leakage of Single-Qubit Gates for Superconducting Quantum Processors Using Analytical Control Pulse Envelopes

Eric Hyyppä, Antti P. Vepsäläinen, Miha Papič +10 more

Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024

arXiv:2402.17757•PRX Quantum•Sep 19, 2024•67 citations

Transducer leakage error suppression using invariant-based shortcut

Shi-Qiang Qiao, Zheng Shan, Xue-Ke Song +3 more

We present a method for suppressing transducer leakage errors in spin-superconducting hybrid quantum systems with the theory of optimal invariant-based shortcut. By mediated virtual photons as a transducer to exchange the energy between the spin qubit and a transmon qubit, the fidelity of the population of the final state features a broad range above 99\% under the influence of leakage error. The leakage probability from computational subspace to non-computational subspace can be effectively suppressed at a lowest value with $0.01$. Based on the optimized pulse control designed by the invariant-based inverse engineering, the high-fidelity quantum iSWAP gate operations and entanglement state preparation within the computational subspace are achieved. {Compared to the traditional $π$ pulse, derivative removal by adiabatic gate, counter-diabatic shortcut schemes, and limited-memory Broyden-Fletcher-Goldfarb-Shanno gradient ascent pulse engineering, the optimized shortcut scheme can still achieve a high fidelity with 99\% in the presence of decoherence and control error.} When taking into account the possibility of leakage errors in actual situations, our solution can still largely resist the influence of control errors. The results provides a feasible path for precisely manipulating the quantum state of hybrid quantum systems.

quant-pharXiv:2607.14175•New Journal of Physics•Jul 16, 2026•0 citations

Measuring and Suppressing Quantum State Leakage in a Superconducting Qubit

Zijun Chen, J. Kelly, Chris Quintana +20 more

Leakage errors occur when a quantum system leaves the two-level qubit subspace. Reducing these errors is critically important for quantum error correction to be viable. To quantify leakage errors, we use randomized benchmarking in conjunction with measurement of the leakage population. We characterize single qubit gates in a superconducting qubit, and by refining our use of derivative reduction by adiabatic gate pulse shaping along with detuning of the pulses, we obtain gate errors consistently below 10^{-3} and leakage rates at the 10^{-5} level. With the control optimized, we find that a significant portion of the remaining leakage is due to incoherent heating of the qubit.

arXiv:1509.05470•Physical Review Letters•Jan 13, 2016•264 citations

Ultrafast Single Qubit Gates through Multi-Photon Transition Removal

Y. Gao, A. Galicia, J. D. Da Costa Jesus +12 more

One of the main enablers in quantum computing is having qubit control that is precise and fast. However, qubits typically have multilevel structures making them prone to unwanted transitions from fast gates. This leakage out of the computational subspace is especially detrimental to algorithms as it has been observed to cause long-lived errors, such as in quantum error correction. This forces a choice between either achieving fast gates or having low leakage. Previous works focus on suppressing leakage by mitigating the first to second excited state transition, overlooking multi-photon transitions, and achieving faster gates with further reductions in leakage has remained elusive. Here, we demonstrate single qubit gates with a total leakage error consistently below $2.0\times10^{-5}$, and obtain fidelities above $99.98\%$ for pulse durations down to 6.8 ns for both $X$ and $X/2$ gates. This is achieved by removing direct transitions beyond nearest-neighbor levels using a double recursive implementation of the Derivative Removal by Adiabatic Gate (DRAG) method, which we name the R2D method. Moreover, we find that at such short gate durations and strong driving strengths the main error source is from these higher order transitions. This is all shown in the widely-used superconducting transmon qubit, which has a weakly anharmonic level structure and suffers from higher order transitions significantly. We also introduce an approach for amplifying leakage error that can precisely quantify leakage rates below $10^{-6}$. The presented approach can be readily applied to other qubit types as well.

quant-pharXiv:2511.22365•Nature Communications•Nov 28, 2025•0 citations

Optimal robust single-qubit gates in superconducting quantum processors

Tangyou Huang, Anuj Aggarwal, Jingjun Zhu +11 more

Fault-tolerant quantum computing requires high-fidelity quantum gates that are resilient to control errors and device imperfections. Here, we develop energy-optimal control pulses for single-qubit gates that are simultaneously robust against frequency detuning and waveform inhomogeneities while also suppressing leakage outside the computational subspace. Combining the optimized pulse envelopes with an adaptive control scheme, we experimentally demonstrate optimal robust gates on a superconducting quantum processor. For a gate duration of 90ns, we achieve fidelities above 99.9% for the X gate and 99.6% for Hadamard-type gates. For the X gate, we maintain fidelities above 99.5% for simultaneous drive-amplitude variations up to 20% and qubit detuning up to 4 MHz. This robustness outperforms that of conventional Gaussian pulses by an order of magnitude, without much difference in peak gate fidelity. These results establish a route towards robust single-qubit control in large-scale quantum processors, advancing the development of fault-tolerant quantum computing.

quant-pharXiv:2610.24212•Oct 20, 2026•0 citations
Superconducting qubits are often based on the first two energy levels of a physical anharmonic LC oscillator. Since the anharmonicity of such systems is usually much lower than the involved energy gaps, population can easily leak to higher energy states. This is what characterizes leakage errors, and it can have multiple sources: from coherent error induced by the control platform to incoherent thermal dissipation. In this work, we adapt an optimal control method based on sub-Riemannian geodesic search in the unitary group for a system consisting of two superconducting qubits with leakage levels. We use the Rx(π/2)R_x(π/2)Rx​(π/2) rotation for single-qubit operation analysis, and the iiiSWAP operation for two-qubit analysis. For the former, we find considerable performance improvement in average gate fidelity as well as in the reduction of leakage errors when comparing the obtained optimal pulses with Gaussian and DRAG pulses, especially for short duration pulses. For the iiiSWAP gate, although leakage error remains roughly the same, we manage to obtain considerably higher fidelities with the cost of requiring a slightly longer time evolution.
Abstract Reaching high-speed, high-fidelity qubit operations requires precise control over the shape of the underlying pulses. For weakly anharmonic systems, such as superconducting transmon qubits, short gates lead to leakage to states outside of the computational subspace. Control pulses designed with open-loop optimal control may reduce such leakage. However, model inaccuracies can severely limit the usability of such pulses. We implemented a closed-loop optimization that simultaneously adapts all control parameters based on measurements of a cost function built from Clifford gates. We directly optimize the amplitude and phase of each sample point of the digitized control pulse. We thereby fully exploit the capabilities of the pulse generation electronics and create a 4.16 ns single-qubit pulse with 99.76 % fidelity and 0.044 % leakage. This is a sevenfold reduction of the leakage rate and a threefold reduction in standard errors of the best DRAG pulse we have calibrated at such short durations on the same system.
Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024
We present a method for suppressing transducer leakage errors in spin-superconducting hybrid quantum systems with the theory of optimal invariant-based shortcut. By mediated virtual photons as a transducer to exchange the energy between the spin qubit and a transmon qubit, the fidelity of the population of the final state features a broad range above 99\% under the influence of leakage error. The leakage probability from computational subspace to non-computational subspace can be effectively suppressed at a lowest value with 0.010.010.01. Based on the optimized pulse control designed by the invariant-based inverse engineering, the high-fidelity quantum iSWAP gate operations and entanglement state preparation within the computational subspace are achieved. {Compared to the traditional πππ pulse, derivative removal by adiabatic gate, counter-diabatic shortcut schemes, and limited-memory Broyden-Fletcher-Goldfarb-Shanno gradient ascent pulse engineering, the optimized shortcut scheme can still achieve a high fidelity with 99\% in the presence of decoherence and control error.} When taking into account the possibility of leakage errors in actual situations, our solution can still largely resist the influence of control errors. The results provides a feasible path for precisely manipulating the quantum state of hybrid quantum systems.
Leakage errors occur when a quantum system leaves the two-level qubit subspace. Reducing these errors is critically important for quantum error correction to be viable. To quantify leakage errors, we use randomized benchmarking in conjunction with measurement of the leakage population. We characterize single qubit gates in a superconducting qubit, and by refining our use of derivative reduction by adiabatic gate pulse shaping along with detuning of the pulses, we obtain gate errors consistently below 10^{-3} and leakage rates at the 10^{-5} level. With the control optimized, we find that a significant portion of the remaining leakage is due to incoherent heating of the qubit.
One of the main enablers in quantum computing is having qubit control that is precise and fast. However, qubits typically have multilevel structures making them prone to unwanted transitions from fast gates. This leakage out of the computational subspace is especially detrimental to algorithms as it has been observed to cause long-lived errors, such as in quantum error correction. This forces a choice between either achieving fast gates or having low leakage. Previous works focus on suppressing leakage by mitigating the first to second excited state transition, overlooking multi-photon transitions, and achieving faster gates with further reductions in leakage has remained elusive. Here, we demonstrate single qubit gates with a total leakage error consistently below 2.0×10−52.0\times10^{-5}2.0×10−5, and obtain fidelities above 99.98%99.98\%99.98% for pulse durations down to 6.8 ns for both XXX and X/2X/2X/2 gates. This is achieved by removing direct transitions beyond nearest-neighbor levels using a double recursive implementation of the Derivative Removal by Adiabatic Gate (DRAG) method, which we name the R2D method. Moreover, we find that at such short gate durations and strong driving strengths the main error source is from these higher order transitions. This is all shown in the widely-used superconducting transmon qubit, which has a weakly anharmonic level structure and suffers from higher order transitions significantly. We also introduce an approach for amplifying leakage error that can precisely quantify leakage rates below 10−610^{-6}10−6. The presented approach can be readily applied to other qubit types as well.
Fault-tolerant quantum computing requires high-fidelity quantum gates that are resilient to control errors and device imperfections. Here, we develop energy-optimal control pulses for single-qubit gates that are simultaneously robust against frequency detuning and waveform inhomogeneities while also suppressing leakage outside the computational subspace. Combining the optimized pulse envelopes with an adaptive control scheme, we experimentally demonstrate optimal robust gates on a superconducting quantum processor. For a gate duration of 90ns, we achieve fidelities above 99.9% for the X gate and 99.6% for Hadamard-type gates. For the X gate, we maintain fidelities above 99.5% for simultaneous drive-amplitude variations up to 20% and qubit detuning up to 4 MHz. This robustness outperforms that of conventional Gaussian pulses by an order of magnitude, without much difference in peak gate fidelity. These results establish a route towards robust single-qubit control in large-scale quantum processors, advancing the development of fault-tolerant quantum computing.