As electron sources are reduced in size, fabricated in new materials, or pushed for performance, the analytical formulations for thermo-field electron emission, namely Fowler-Nordheim and Murphy-Good equations and their JWKB-based extensions, are increasingly applied out of the range of conditions for which they were derived. We present GETELEC-3, an open-source code that replaces them with a direct numerical solution of the one-dimensional time-independent Schrödinger equation (1D-TISE). Several methods to solve the 1D-TISE have been implemented to test for speed, robustness, and solution's uncertainty. The Noumerov algorithm is found to be quickest, with the solution uncertainty below 1%, and together with an optimised kernel that advances all electron energies in parallel, the cost of calculating the current density is reduced to a few milliseconds - comparable to the JWKB evaluation. To further boost the calculation speed, especially in complicated barriers, a neural network has been trained on the residual of the logarithm of the semiclassical reference and it reproduces the current density better than 0.4% at a fraction of the computational cost. The code is developed for metals and semiconductors, accepts arbitrary potentials and density of states, and comes with a user-friendly interface and compiled executable to democratise rigorous electron emission calculations and data analysis.
AI Summary
Thermo-field electron emission is commonly calculated using Fowler–Nordheim or Murphy–Good formulas and extensions based on the JWKB approximation. This paper addresses calculations outside the conditions underlying those approximations, as can occur for small emitters, new materials, or demanding operating regimes.
GETELEC-3 is an open-source code that instead computes emission using direct numerical solutions of the one-dimensional time-independent Schrödinger equation. Several solution methods are compared for speed, robustness, and numerical uncertainty. The Numerov algorithm is reported to be the fastest tested method, with solution uncertainty below $1\%$. An optimized kernel advances calculations for all electron energies in parallel, reducing the reported current-density calculation time to a few milliseconds, comparable to evaluating the JWKB approximation.
A neural-network surrogate provides an additional acceleration, particularly for complicated potential barriers. It is trained on the residual relative to a semiclassical reference in logarithmic form and reportedly reproduces current densities to better than $0.4\%$ at lower computational cost. The software supports metals and semiconductors, accepts arbitrary potentials and densities of states, and includes a user interface and compiled executable.
The full text is unavailable. The abstract does not specify benchmark hardware, tested parameter ranges, how numerical uncertainty is assessed, or the neural network’s validation domain. The numerical treatment described remains one-dimensional; its accuracy claims do not establish the adequacy of that physical reduction.
No sign of AI-generated textIncremental
Written by gpt-6.1-sol from the abstract only. Automated: it can be wrong.
As electron sources are reduced in size, fabricated in new materials, or pushed for performance, the analytical formulations for thermo-field electron emission, namely Fowler-Nordheim and Murphy-Good equations and their JWKB-based extensions, are increasingly applied out of the range of conditions for which they were derived. We present GETELEC-3, an open-source code that replaces them with a direct numerical solution of the one-dimensional time-independent Schrödinger equation (1D-TISE). Several methods to solve the 1D-TISE have been implemented to test for speed, robustness, and solution's uncertainty. The Noumerov algorithm is found to be quickest, with the solution uncertainty below 1%, and together with an optimised kernel that advances all electron energies in parallel, the cost of calculating the current density is reduced to a few milliseconds - comparable to the JWKB evaluation. To further boost the calculation speed, especially in complicated barriers, a neural network has been trained on the residual of the logarithm of the semiclassical reference and it reproduces the current density better than 0.4% at a fraction of the computational cost. The code is developed for metals and semiconductors, accepts arbitrary potentials and density of states, and comes with a user-friendly interface and compiled executable to democratise rigorous electron emission calculations and data analysis.
Thermo-field electron emission is commonly calculated using Fowler–Nordheim or Murphy–Good formulas and extensions based on the JWKB approximation. This paper addresses calculations outside the conditions underlying those approximations, as can occur for small emitters, new materials, or demanding operating regimes.
GETELEC-3 is an open-source code that instead computes emission using direct numerical solutions of the one-dimensional time-independent Schrödinger equation. Several solution methods are compared for speed, robustness, and numerical uncertainty. The Numerov algorithm is reported to be the fastest tested method, with solution uncertainty below 1%. An optimized kernel advances calculations for all electron energies in parallel, reducing the reported current-density calculation time to a few milliseconds, comparable to evaluating the JWKB approximation.
A neural-network surrogate provides an additional acceleration, particularly for complicated potential barriers. It is trained on the residual relative to a semiclassical reference in logarithmic form and reportedly reproduces current densities to better than 0.4% at lower computational cost. The software supports metals and semiconductors, accepts arbitrary potentials and densities of states, and includes a user interface and compiled executable.
The full text is unavailable. The abstract does not specify benchmark hardware, tested parameter ranges, how numerical uncertainty is assessed, or the neural network’s validation domain. The numerical treatment described remains one-dimensional; its accuracy claims do not establish the adequacy of that physical reduction.
We present a general-purpose, open-source software suite, SQUIRREL (Streamlined Quantum Unified Interface for Researching Real-time Excitations with Light), for propagating the time-dependent Schrödinger equation on complex geometries in the presence of time-dependent electric and/or magnetic fields. To handle large systems that can be executed on a conventional desktop computer, the SQUIRREL software suite uses a suite of efficient propagation methods for various quantum dynamics applications, including a new perturbation-based element-dropping algorithm that improves computational performance with minimal loss of accuracy. We analyze the efficacy of these optimizations for Crank-Nicolson, scaled Taylor series approximation, and split-operator propagation methods and discuss the range of their applicability to a variety of quantum dynamics problems. In addition, we provide several examples of time-dependent dynamics calculations and extensive documentation for generating custom geometries, potentials, and time-propagation approaches. Our numerical benchmarks and results demonstrate the versatility of the SQUIRREL software suite for efficiently calculating quantum dynamics in complex nanoscale geometries, particularly in the presence of time-dependent magnetic fields, which have received less attention in previous quantum dynamics studies. Program summary Program Title: SQUIRREL CPC Library link to program files: https://doi.org/10.17632/kfvs5s88sj.1 Licensing provisions: GNU General Public License 3 Programming language: MATLAB Supplementary material: Additional details on calculations with an anisotropic effective mass, determination of timesteps, propagation timings, and element-dropping timings. Nature of problem: The SQUIRREL software suite solves the time-dependent Schrödinger equation for electronic states in the presence of time-dependent electric and/or magnetic fields. The code is well-suited for calculating electron dynamics of complex nanostructures in the effective mass approximation, using various propagation and sparse-matrix techniques to reduce the computational complexity of these problems. The program provides a user-friendly interface for testing these optimizations and generating custom geometries and potentials for systems of interest. Solution method: The SQUIRREL software suite uses Crank-Nicolson, split-operator, Padé approximant, and scaled-Taylor-series-based propagation methods to calculate electron dynamics on a finite-element basis. The code includes a novel perturbation-based element-dropping method, which enables sparse representations of the typically dense finite element Hamiltonian matrix. This capability enables a highly efficient and flexible approach for calculating driven dynamics in quantum systems with complex geometries and time-dependent electric/magnetic fields.
Solutions to the Schrodinger equation can be used to predict the electronic structure of molecules and materials and therefore infer their complex physical and chemical properties. Variational Quantum Monte Carlo (VMC) is a technique that can be used to solve the weak form of the Schrodinger equation. Applying VMC to systems with N electrons involves evaluating the determinant of an N by N matrix. The evaluation of this determinant scales as O(N3) and is the main computational cost in the VMC process. In this work, we investigate an alternative VMC technique based on the Vandermonde determinant. The Vandermonde determinant is a product of pairwise differences and so evaluating it scales as O(N2). Therefore, this approach reduces the computational cost by a factor of N. The Vandermonde determinant was implemented in PyTorch and the performance was assessed in approximating the ground state energy of various quantum systems against existing techniques. The performance is evaluated in a variety of systems, starting with the one-dimensional particle in a box, and then considering more complicated atomic systems with multiple particles. The Vandermonde determinant was also implemented in PauliNet, a deep-learning architecture for VMC. The new method is shown to be computationally efficient, and results in a speed-up as large as 5X. In these cases, the new ansatz obtains a reasonable approximation for wavefunctions of atomic systems, but does not reach the accuracy of the Hartree-Fock method that relies on the Slater determinant. It is observed that while the use of neural networks in VMC can result in highly accurate solutions, further work is necessary to determine an appropriate balance between computational time and accuracy.
The time-dependent Schrödinger equation (TDSE) in real space is fundamental to understanding the dynamics of many-electron quantum systems, with applications ranging from quantum chemistry to condensed matter physics and materials science. However, solving the TDSE for complex fermionic systems remains a significant challenge, particularly due to the need to capture the time-evolving many-body correlations, while the antisymmetric nature of fermionic wavefunctions complicates the function space in which these solutions must be represented. We propose a general-purpose neural network framework for solving the real-space TDSE, Fermionic Antisymmetric Spatio-Temporal Network, which treats time as an explicit input alongside spatial coordinates, enabling a unified spatiotemporal representation of complex, antisymmetric wavefunctions for fermionic systems. This approach formulates the TDSE as a global optimization problem, avoiding step-by-step propagation and supporting highly parallelizable training. The method is demonstrated on five benchmark problems, achieving excellent agreement with reference solutions across all cases. These results demonstrate the method's accuracy and flexibility within the bound-state manifold across various dimensions and interaction regimes. While the current localized Ansatz inherently restricts the description of extensive ionization and continuum states, the method demonstrates the capability to stably simulate coherent multi-electron dynamics over extended time windows. Our framework offers a highly expressive alternative to traditional basis-dependent or mean-field methods, opening new possibilities for ab initio simulations of time-dependent quantum systems, with applications in quantum dynamics, molecular control, and ultrafast spectroscopy.
In this work we present TDStool, a general-purpose easy-to-use software tool for the solution of the time-dependent Schrödinger equation in 2D and 3D domains with arbitrary time-dependent potentials. The numerical algorithms adopted in the code, namely Fourier split-step and box-integration methods, are sketched and the main characteristics of the tool are illustrated. As an example, the dynamics of a single electron in systems of two and three coupled quantum dots is obtained. The code is released as an open-source project and has a build-in graphical interface for the visualization of the results.
Quantum field theory (QFT) for interacting many-electron systems is fundamental to condensed matter physics, yet achieving accurate solutions confronts computational challenges in managing the combinatorial complexity of Feynman diagrams, implementing systematic renormalization, and evaluating high-dimensional integrals. We present a unifying framework that integrates QFT computational workflows with an AI-powered technology stack. A cornerstone of this framework is representing Feynman diagrams as computational graphs, which structures the inherent mathematical complexity and facilitates the application of optimized algorithms developed for machine learning and high-performance computing. Consequently, automatic differentiation, native to these graph representations, delivers efficient, fully automated, high-order field-theoretic renormalization procedures. This graph-centric approach also enables sophisticated numerical integration; our neural-network-enhanced Monte Carlo method, accelerated via massively parallel GPU implementation, efficiently evaluates challenging high-dimensional diagrammatic integrals. Applying this framework to the uniform electron gas, we determine the quasiparticle effective mass to a precision significantly surpassing current state-of-the-art simulations. Our work demonstrates the transformative potential of integrating AI-driven computational advances with QFT, opening systematic pathways for solving complex quantum many-body problems across disciplines.
Directly solving the full electron-nuclear Schrödinger equation remains one of the grand challenges in quantum mechanics. Here, we propose a quantum-chemically motivated orbital-based neural network wavefunction ansatz with explicit many-body electron-electron correlation terms, with parameters depending on the entire electron-nuclear configuration, enabling an accurate description of strongly correlated and/or multi-reference electronic structures by a single Slater-determinant across a broad nuclear configuration space. To train this wavefunction, we further develop an efficient hybrid optimization strategy that combines the variational Monte Carlo technique with local-energy constraints, mitigating the intrinsic sampling bias of the former and considerably reducing the statistical error. These advances are embedded in a unified neural network framework, Schrödinger, enabling the determination of globally accurate potential energy surfaces with a single training for systems ranging from strongly correlated diatomic molecules, triatomic reactions containing conical intersections, to polyatomic multi-reference molecules. This work offers a practical machine-learning tool for solving the electron-nuclear Schrödinger equation and capturing full quantum effects beyond the Born-Oppenheimer approximation.