Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.03341

Low-Density Parity-Check Codes of High Girth from Permutation Polynomials

Tasawwar Hussain, Anthony Gómez-Fonseca, Tefjol Pllaha

Published Oct 2, 2026• 0 citations
arXivHTMLPDF

Abstract

Quasi-cyclic low-density parity-check (QC-LDPC) codes are widely used in modern communication standards due to their simple structure and efficient encoder and decoder implementations. However, the commutativity of the circulant permutation matrices used in their construction significantly limits their girth and minimum distance, affecting iterative decoding performance. In this paper, we investigate protograph-based codes constructed using permutation polynomials of higher degree, focusing on a closed family of non-commuting binomial permutation polynomials that enables these constructions to exceed both of these girth and minimum distance upper bounds while maintaining a simple representation. Simulation results demonstrate improved decoding performance compared to constructions based on affine permutation polynomials, which include QC-LDPC codes.

Related papers

Low Density Parity-Check Codes Based on Affine Permutation Matrices

Zhongxun Wang, Ling Sun, Yang Xi

Recently, Low Density Parity-Check (LDPC) codes based on Affine Permutation Matrices (APM) drew lots of attention. Compared with the Quasi-Cyclic LDPC (QC-LDPC) codes, these kinds of codes have some advantages. APM-LDPC codes obtain lower cycle-distributions, minimum hamming distance and greater girth. This paper explains the importance of cyclic distribution by comparing APM-LDPC codes with QC-LDPC codes. Then a particular form of APM-LDPC codes is proposed and researched. The new codes can low down the cycle-distribution to larger extent. In the following research, an effective method, which constructs the new codes with fixed girth, is proposed. Simulations show that the construction method is reasonable and effective. The transmission performances are better than the traditional methods, as well. Finally, the implementation and verification are carried out on FPGA.

International Journal of Pattern Recognition and Artificial Intelligence•Jun 29, 2020•0 citations

On the Construction of Multitype Quasi-Cyclic Low-Density Parity-Check Codes With Different Girth and Length

Farzaneh Abedi, Mohammad Gholami

Multitype quasi-cyclic (QC) low-density parity-check (LDPC) codes are a class of protograph LDPC codes lifted cyclically from protographs with multiple edges, represented by two weight and slope matrices. For a given weight-matrix, an approach is proposed to find the maximum-achievable girth$g_{\max }$of the corresponding multitype QC-LDPC codes by some inevitable chains having less complexity than the existing methods. This advantage leads to some new patterns of the weight matrices such that the corresponding codes have some improvements in terms of the maximum-achievable girths or the minimum-distance upper-bounds. In continue, for a given weight-matrix with maximum-achievable girth$g_{\max }$, some slope-matrices are constructed by a depth-first search algorithm for which the corresponding multitype QC-LDPC codes with even girth$g$,$g\le g_{\max }$, have smaller lengths, higher rates, or larger minimum-distances than the state-of-the-art achievements. Simulation results show that the constructed codes have some error-rate advantages than PEG, random-like, CCSDS, and 802.11n/ac IEEE standard LDPC codes.

IEEE Access•Jan 1, 2021•2 citations

Breaking the Orthogonality Barrier in Quantum LDPC Codes

Kenta Kasai

Classical low-density parity-check (LDPC) codes are a widely deployed and well-established technology, forming the backbone of modern communication and storage systems. It is well known that, in this classical setting, increasing the girth of the Tanner graph while maintaining regular degree distributions leads simultaneously to good belief-propagation (BP) decoding performance and large minimum distance. In the quantum setting, however, this principle does not directly apply because quantum LDPC codes must satisfy additional orthogonality constraints between their parity-check matrices. When one enforces both orthogonality and regularity in a straightforward manner, the girth is typically reduced and the minimum distance becomes structurally upper bounded. In this work, we overcome this limitation by using permutation matrices with controlled commutativity and by restricting the orthogonality constraints to only the active part of the construction, while preserving regular check-matrix structures. This design circumvents conventional structural distance limitations induced by parent-matrix orthogonality, and enables the construction of quantum LDPC codes with large girth while avoiding latent low-weight logical operators. As a concrete demonstration, we construct a girth-8, (3,12)-regular $[[9216,4612, \leq 48]]$ quantum LDPC code and show that, under BP decoding combined with a low-complexity post-processing algorithm, it achieves a frame error rate as low as $10^{-8}$ on the depolarizing channel with error probability $4 \%$.

quant-pharXiv:2601.08824•Quantum•Jan 14, 2026•0 citations

Linear Permutation Polynomial Codes

Ryoichiro Yoshida, Kenta Kasai

Quasi-cyclic low-density parity-check (QC-LDPC) codes are one of the most important code classes of LDPC codes. They have two drawbacks: lack of randomness and limited girth lead to a degraded decoding performance in the waterfall and error floor regions, respectively. To tackle these problems, we present a new class of LDPC codes, named linear permutation polynomial (LPP) codes, whose parity-check matrix consists of permutation matrices based on LPPs. The girth of regular QC-LDPC codes is upper bounded by 12, while LPP codes break this limit. We demonstrate that LPP codes have error performance almost equivalent to random ones.

IEEE International Symposium on Information Theory (ISIT)•Jul 1, 2019•3 citations

Some explicit constructions of type-II, III, IV, V QCLDPC codes with girth 6

Farzaneh Abedi, Mohammad Gholami

Multi-type quasi-cyclic (QC) low-density parity-check (LDPC) codes can be considered as multiple-edge protograph QC-LDPC codes having some advantages in the minimum Hamming distance bound over single-edge protograph codes or type-I QC-LDPC codes when the base matrices have the same size. In this paper, we investigate a class of multi-type QC-LDPC codes whose parity-check matrices contain just one blockrow of circulants and we obtain the generator matrix of such codes in general form. Using the permutation arrays and defining injection arrays, we present a new approach to construct a class of high-rate type-I QC-LDPC codes with girth 6 from the constructed 4-cycle free multi-type QC-LDPC codes. In continue, for 2 ≤ w ≤ 6, some type-w QC-LDPC codes with girth 6 are constructed explicitly such that the constructed codes are flexible in terms of rate and length. To the best of our knowledge, for w = 5,6, this is the first paper which deals with the explicit construction of type-w QC-LDPC codes with girth 6 and high rates. Moreover, for w = 3,4, the constructed type-w QC-LDPC codes have better (6,8)-cycle multiplicities than the codes with minimum achievable length recently constructed by cyclic difference families (CDFs). Simulation results show that the binary and non-binary constructed codes outperform the constituent underlying QC-LDPC codes.

China Communications•May 1, 2020•4 citations

Quantum Error Correction with Girth-16 Non-Binary LDPC Codes via Affine Permutation Construction

Kenta Kasai

We propose a method for constructing quantum error-correcting codes using non-binary low-density parity-check codes whose Tanner graphs have girth 16. While conventional constructions based on circulant permutation matrices are limited to a maximum girth of 12, our approach leverages affine permutation matrices combined with a randomized sequential selection strategy to eliminate short cycles and achieve girth 16. Numerical experiments show that the proposed codes significantly reduce the number of low-weight codewords. Joint belief propagation decoding over depolarizing channels reveals that although a slight degradation appears in the waterfall region, a substantial improvement is achieved in the error floor performance. We also evaluated the minimum distance of the proposed codes and found that they achieve a larger upper bound than conventional constructions.

arXiv:2504.17790•International Symposium on Turbo Codes and Iterative Information Processing•Aug 18, 2025•2 citations
Quasi-cyclic low-density parity-check (QC-LDPC) codes are widely used in modern communication standards due to their simple structure and efficient encoder and decoder implementations. However, the commutativity of the circulant permutation matrices used in their construction significantly limits their girth and minimum distance, affecting iterative decoding performance. In this paper, we investigate protograph-based codes constructed using permutation polynomials of higher degree, focusing on a closed family of non-commuting binomial permutation polynomials that enables these constructions to exceed both of these girth and minimum distance upper bounds while maintaining a simple representation. Simulation results demonstrate improved decoding performance compared to constructions based on affine permutation polynomials, which include QC-LDPC codes.
Recently, Low Density Parity-Check (LDPC) codes based on Affine Permutation Matrices (APM) drew lots of attention. Compared with the Quasi-Cyclic LDPC (QC-LDPC) codes, these kinds of codes have some advantages. APM-LDPC codes obtain lower cycle-distributions, minimum hamming distance and greater girth. This paper explains the importance of cyclic distribution by comparing APM-LDPC codes with QC-LDPC codes. Then a particular form of APM-LDPC codes is proposed and researched. The new codes can low down the cycle-distribution to larger extent. In the following research, an effective method, which constructs the new codes with fixed girth, is proposed. Simulations show that the construction method is reasonable and effective. The transmission performances are better than the traditional methods, as well. Finally, the implementation and verification are carried out on FPGA.
Multitype quasi-cyclic (QC) low-density parity-check (LDPC) codes are a class of protograph LDPC codes lifted cyclically from protographs with multiple edges, represented by two weight and slope matrices. For a given weight-matrix, an approach is proposed to find the maximum-achievable girthgmax⁡g_{\max }gmax​of the corresponding multitype QC-LDPC codes by some inevitable chains having less complexity than the existing methods. This advantage leads to some new patterns of the weight matrices such that the corresponding codes have some improvements in terms of the maximum-achievable girths or the minimum-distance upper-bounds. In continue, for a given weight-matrix with maximum-achievable girthgmax⁡g_{\max }gmax​, some slope-matrices are constructed by a depth-first search algorithm for which the corresponding multitype QC-LDPC codes with even girthggg,g≤gmax⁡g\le g_{\max }g≤gmax​, have smaller lengths, higher rates, or larger minimum-distances than the state-of-the-art achievements. Simulation results show that the constructed codes have some error-rate advantages than PEG, random-like, CCSDS, and 802.11n/ac IEEE standard LDPC codes.
Classical low-density parity-check (LDPC) codes are a widely deployed and well-established technology, forming the backbone of modern communication and storage systems. It is well known that, in this classical setting, increasing the girth of the Tanner graph while maintaining regular degree distributions leads simultaneously to good belief-propagation (BP) decoding performance and large minimum distance. In the quantum setting, however, this principle does not directly apply because quantum LDPC codes must satisfy additional orthogonality constraints between their parity-check matrices. When one enforces both orthogonality and regularity in a straightforward manner, the girth is typically reduced and the minimum distance becomes structurally upper bounded. In this work, we overcome this limitation by using permutation matrices with controlled commutativity and by restricting the orthogonality constraints to only the active part of the construction, while preserving regular check-matrix structures. This design circumvents conventional structural distance limitations induced by parent-matrix orthogonality, and enables the construction of quantum LDPC codes with large girth while avoiding latent low-weight logical operators. As a concrete demonstration, we construct a girth-8, (3,12)-regular [[9216,4612,≤48]][[9216,4612, \leq 48]][[9216,4612,≤48]] quantum LDPC code and show that, under BP decoding combined with a low-complexity post-processing algorithm, it achieves a frame error rate as low as 10−810^{-8}10−8 on the depolarizing channel with error probability 4%4 \%4%.
Quasi-cyclic low-density parity-check (QC-LDPC) codes are one of the most important code classes of LDPC codes. They have two drawbacks: lack of randomness and limited girth lead to a degraded decoding performance in the waterfall and error floor regions, respectively. To tackle these problems, we present a new class of LDPC codes, named linear permutation polynomial (LPP) codes, whose parity-check matrix consists of permutation matrices based on LPPs. The girth of regular QC-LDPC codes is upper bounded by 12, while LPP codes break this limit. We demonstrate that LPP codes have error performance almost equivalent to random ones.
Multi-type quasi-cyclic (QC) low-density parity-check (LDPC) codes can be considered as multiple-edge protograph QC-LDPC codes having some advantages in the minimum Hamming distance bound over single-edge protograph codes or type-I QC-LDPC codes when the base matrices have the same size. In this paper, we investigate a class of multi-type QC-LDPC codes whose parity-check matrices contain just one blockrow of circulants and we obtain the generator matrix of such codes in general form. Using the permutation arrays and defining injection arrays, we present a new approach to construct a class of high-rate type-I QC-LDPC codes with girth 6 from the constructed 4-cycle free multi-type QC-LDPC codes. In continue, for 2 ≤ w ≤ 6, some type-w QC-LDPC codes with girth 6 are constructed explicitly such that the constructed codes are flexible in terms of rate and length. To the best of our knowledge, for w = 5,6, this is the first paper which deals with the explicit construction of type-w QC-LDPC codes with girth 6 and high rates. Moreover, for w = 3,4, the constructed type-w QC-LDPC codes have better (6,8)-cycle multiplicities than the codes with minimum achievable length recently constructed by cyclic difference families (CDFs). Simulation results show that the binary and non-binary constructed codes outperform the constituent underlying QC-LDPC codes.
We propose a method for constructing quantum error-correcting codes using non-binary low-density parity-check codes whose Tanner graphs have girth 16. While conventional constructions based on circulant permutation matrices are limited to a maximum girth of 12, our approach leverages affine permutation matrices combined with a randomized sequential selection strategy to eliminate short cycles and achieve girth 16. Numerical experiments show that the proposed codes significantly reduce the number of low-weight codewords. Joint belief propagation decoding over depolarizing channels reveals that although a slight degradation appears in the waterfall region, a substantial improvement is achieved in the error floor performance. We also evaluated the minimum distance of the proposed codes and found that they achieve a larger upper bound than conventional constructions.