One of the most important initial steps in quantum computing is high-fidelity quantum state preparation, because errors in it can affect the final computational result. Therefore, one of the major challenges is to design a quantum circuit that can achieve the desired target state accurately with a smaller number of gates. Traditionally, circuits are designed using predefined rules and mathematical decompositions, but this makes it difficult to design circuits for different and complex target states. This paper presents TATVA, a reinforcement learning (RL) system for synthesizing quantum circuits. TATVA views circuit synthesis as a sequential decision problem in which the agents select one gate at a time and calculate the fidelity after each applied gate, with the gate producing the highest fidelity selected for the circuit. The system introduces a parallel architecture that uses two RL agents, Deep Q-Network (DQN) and Proximal Policy Optimization (PPO), along with Qiskit's statevector simulator. The system can synthesize up to 5 qubits while achieving a fidelity of 0.999999 and producing compact circuits. After achieving the desired fidelity, it performs a post-hoc optimization step that reduces the circuit depth while preserving the achieved fidelity. The circuit is finalized using fidelity, success rate, gate count, and circuit depth. Target states that are not used during training are used to test whether the system has learned effectively and can generalize beyond the training states. This approach aims to enable automatic quantum circuit synthesis with high fidelity using reinforcement learning.
One of the most important initial steps in quantum computing is high-fidelity quantum state preparation, because errors in it can affect the final computational result. Therefore, one of the major challenges is to design a quantum circuit that can achieve the desired target state accurately with a smaller number of gates. Traditionally, circuits are designed using predefined rules and mathematical decompositions, but this makes it difficult to design circuits for different and complex target states. This paper presents TATVA, a reinforcement learning (RL) system for synthesizing quantum circuits. TATVA views circuit synthesis as a sequential decision problem in which the agents select one gate at a time and calculate the fidelity after each applied gate, with the gate producing the highest fidelity selected for the circuit. The system introduces a parallel architecture that uses two RL agents, Deep Q-Network (DQN) and Proximal Policy Optimization (PPO), along with Qiskit's statevector simulator. The system can synthesize up to 5 qubits while achieving a fidelity of 0.999999 and producing compact circuits. After achieving the desired fidelity, it performs a post-hoc optimization step that reduces the circuit depth while preserving the achieved fidelity. The circuit is finalized using fidelity, success rate, gate count, and circuit depth. Target states that are not used during training are used to test whether the system has learned effectively and can generalize beyond the training states. This approach aims to enable automatic quantum circuit synthesis with high fidelity using reinforcement learning.
With recent advancements in quantum computing technology, optimizing quantum circuits and ensuring reliable quantum state preparation have become increasingly vital. Traditional methods often demand extensive expertise and manual calculations, posing challenges as quantum circuits grow in qubit- and gate-count. Therefore, harnessing machine learning techniques to handle the growing variety of gate-to-qubit combinations is a promising approach. In this work, we introduce a comprehensive reinforcement learning environment for quantum circuit synthesis, where circuits are constructed utilizing gates from the the Clifford+T gate set to prepare specific target states. Our experiments focus on exploring the relationship between the depth of synthesized quantum circuits and the circuit depths used for target initialization, as well as qubit count. We organize the environment configurations into multiple evaluation levels and include a range of well-known quantum states for benchmarking purposes. We also lay baselines for evaluating the environment using Proximal Policy Optimization. By applying the trained agents to benchmark tests, we demonstrated their ability to reliably design minimal quantum circuits for a selection of 2-qubit Bell states.
The optimization of the limited resources of current quantum devices hinges on the implementation of quantum-compiling techniques. The process of transforming high-level quantum algorithms into executable quantum circuits has a significant impact on the performance and fidelity of computations. One of the most critical aspects of the compiling stack is the synthesis of quantum circuits, which aims to minimize the depth and number of gates, as well as the error rate. Nevertheless, the optimal synthesis algorithms are extremely computationally expensive. This is why synthesis algorithms based on reinforcement learning (RL) have recently been introduced. However, such algorithms are constrained by the topology of quantum processors, necessitating retraining of the RL agent for different topologies. To achieve a balance between adaptability, optimality, and computational cost in RL-based quantum circuit synthesis techniques, this work proposes an RL-based quantum circuit synthesis algorithm of Clifford operators that addresses different topologies simultaneously. Experimental tests demonstrate that our synthesizer outperforms state-of-the-art greedy techniques while being significantly faster than boolean satisfiability solvers (SAT).
This paper presents a novel approach to quantum circuit compilation leveraging reinforcement learning (RL). The core idea is to train an RL agent to dynamically optimize quantum circuit structures, aiming to minimize gate count and enhance overall circuit performance. Traditional quantum circuit compilation methods often rely on static heuristics and pre-defined optimization strategies, which may not be optimal for all quantum algorithms or hardware platforms. Our approach addresses this limitation by allowing the RL agent to learn a policy that adapts to the specific characteristics of the algorithm and the target quantum hardware. The agent learns by interacting with a simulated quantum circuit environment, receiving rewards based on circuit fidelity, depth, and gate count. The results demonstrate the potential of RL to significantly improve the efficiency and robustness of quantum computations. The key components of the system are: a high-level quantum algorithm representation, an RL agent, a quantum circuit simulator, and a reward function. The agent's policy is represented as a neural network, enabling it to generalize across different algorithms and hardware. We demonstrate the effectiveness of this approach through simulations, showcasing its ability to outperform conventional compilation methods in terms of reducing circuit depth and gate count while maintaining high fidelity.
A reinforcement learning (RL) framework is introduced for the efficient synthesis of quantum circuits that generate specified target quantum states from a fixed initial state, addressing a central challenge in both the Noisy Intermediate-Scale Quantum (NISQ) era and future fault-tolerant quantum computing. The approach utilizes tabular Q-learning, based on action sequences, within a discretized quantum state space, to effectively manage the exponential growth of the space dimension. The framework introduces a hybrid reward mechanism, combining a static, domain-informed reward that guides the agent toward the target state with customizable dynamic penalties that discourage inefficient circuit structures such as gate congestion and redundant state revisits. This is a circuit-aware reward, in contrast to the current trend of works on this topic, which are primarily fidelity-based. By leveraging sparse matrix representations and state-space discretization, the method enables practical navigation of high-dimensional environments while minimizing computational overhead. Benchmarking on graph-state preparation tasks for up to seven qubits, we demonstrate that the algorithm consistently discovers minimal-depth circuits with optimized gate counts. Moreover, extending the framework to a universal gate set still yields low depth circuits, highlighting the algorithm’s robustness and adaptability. The results confirm that this RL-driven approach, with our completely circuit-aware method, efficiently explores the complex quantum state space and synthesizes near-optimal quantum circuits, providing a resource-efficient foundation for quantum circuit optimization.
The practical implementation of quantum algorithms on noisy intermediate-scale quantum devices encounters operational limitations due to decoherence and other sources of noise inherent in real hardware. To mitigate these errors while preserving the original functionality of the algorithm, shorter quantum circuits are therefore preferred. This motivates the development of effective quantum circuit optimization algorithms. Learning-based approaches have emerged as a leading candidate, yet existing autonomous agents remain inefficient, spending most of their training capacity rediscovering elementary reductions that deterministic rule-based methods already handle reliably. To address this challenge, we propose a reinforcement learning framework that embeds a deterministic Commutation-and-Reduction (CR) algorithm directly into the training environment. After every agent action, the CR algorithm automatically resolves elementary commutations and cancellations, enabling the agent to focus its learning capacity on the non-trivial optimizations where reinforcement learning adds real value. Empirical evaluation across two gate sets, the universal Clifford+T basis and the CNOT+Pauli basis, shows that RL+CR produces shorter circuits than a standard RL agent at all tested scales. We demonstrate that RL trained on smaller quantum circuits can be applied to larger quantum circuits. On 20-qubit Clifford+T circuits, five times larger than the training circuits, RL+CR removes twice as many gates as standard RL. This work provides a robust approach that could accelerate the compilation and optimization processes for future fault-tolerant and utility-scale quantum systems.
In the Noisy Intermediate-Scale Quantum (NISQ) era, efficient quantum circuit synthesis is essential for optimizing limited qubit resources and mitigating noise effects. Quantum Linear Reversible Circuits (QLRCs) are a fundamental class of circuits with applications in quantum compilation or quantum error correction. They are composed exclusively of CX and SWAP gates, which are among the noisiest operations on current quantum hardware. Therefore, their efficient synthesis is pivotal for executing QLRCs on NISQ processors, which have restricted connectivity between qubits. In this direction, we introduce a Reinforcement Learning (RL)-based synthesis approach using Proximal Policy Optimization (PPO) to synthesize QLRCs on generic topologies of up to five qubits. This work extends previous work that did not handle different topologies of quantum processors. Our method dynamically adapts to hardware constraints, learning optimal or near-optimal gate decompositions. We compare our approach against Qiskit’s synthesis methods for QLRCs, demonstrating that our RL-based synthesizer consistently achieves lower CX gate depth. These results highlight the potential of RL-driven quantum circuit synthesis as a powerful alternative to traditional heuristic-based techniques, paving the way for more efficient AI-based quantum compilation strategies in the NISQ era.