Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.35202

Positronium Laser Deceleration, Cooling and Trapping

Barna Mendei, Helmut Ritsch

quant-phSubmitted Sep 28, 2026• Announced Sep 29, 2026• 0 citations
arXivHTMLPDF

Abstract

We numerically study laser deceleration, cooling and trapping of host fast ortho-positronium (Ps) bunches as produced in silica microchannel targets using positron bunches from a Surko trap. While Doppler laser cooling routinely allows to cool neutral atom species below milli-Kelvin kinetic temperatures, the fast ground state annihilation and the high recoil shift to line-width ratio in Ps pose new challenging limitations on timing and the required laser power. Earlier theoretical work and first experiments already exhibit viable prospects for radiation pressure cooling to create unprecedented cold and dense Ps ensembles. Our extended numerical studies confirm very good prospects to simultaneously decelerate, cool and optically trap Ps atoms in a standard Doppler cooling geometry on the $1^3\mathrm{S}$--$2^3\mathrm{P}$ transition. Including the full Zeeman state manifolds and adding additional transverse lasers on the $2^3\mathrm{P}$--$3^3\mathrm{D}$ transition improves timing and final temperature to allow for optical trapping at the end. The required laser powers and geometry parameters to implement effective slowing and trapping within a time frame, where the majority of atoms is not annihilated, is in reach of current technology of $\mathrm{mJ}$ energy pulses of approximately $100\ \mathrm{ns}$ duration. Future extensions to collectively enhance cooling and trapping in optical cavities or hollow-core fibres should finally allow fast preparation of ultra-cold Ps systems as future basis of superradiant lasing and Bose--Einstein condensates.

Comments
24 pages, 12 figures

Related papers

Experimental progress in positronium laser physics

D. B. Cassidy

The field of experimental positronium physics has advanced significantly in the last few decades, with new areas of research driven by the development of techniques for trapping and manipulating positrons using Surko-type buffer gas traps. Large numbers of positrons (typically ≥106) accumulated in such a device may be ejected all at once, so as to generate an intense pulse. Standard bunching techniques can produce pulses with ns (mm) temporal (spatial) beam profiles. These pulses can be converted into a dilute Ps gas in vacuum with densities on the order of 107 cm−3 which can be probed by standard ns pulsed laser systems. This allows for the efficient production of excited Ps states, including long-lived Rydberg states, which in turn facilitates numerous experimental programs, such as precision optical and microwave spectroscopy of Ps, the application of Stark deceleration methods to guide, decelerate and focus Rydberg Ps beams, and studies of the interactions of such beams with other atomic and molecular species. These methods are also applicable to antihydrogen production and spectroscopic studies of energy levels and resonances in positronium ions and molecules. A summary of recent progress in this area will be given, with the objective of providing an overview of the field as it currently exists, and a brief discussion of some future directions.

The European Physical Journal D•Mar 1, 2018•169 citations

Spectroscopy and manipulation of positronium in excited states

A. Alonso

A Surko-type positron trap has been used to produce intense positron pulses, and thus a dilute positronium (Ps) gas in vacuum with an initial density of 10^7 cm-3. This gas was excited with lasers for a variety of experiments. n = 2 atoms were prepared using a single-photon excitation scheme (1S to 2P) in controlled electric and magnetic fields for studies of Stark and Zeeman effects, measurements of Ps cooling via Doppler spectroscopy, and for the produciton of ensembles of atoms in pure 2S states. The first measurements of Ps excitation to specific Rydberg-Stark states were performed via a two-color two-photon excitation scheme ( 1S to 2P to nS/nD). Ps atoms in low-field–seeking Rydberg Stark states were prepared at the entrance of an electrostatic quadrupole guide which was used to control the trajectories and velocity distributions of the Ps atoms. These advances, together with the results from numerical simulations, suggest that these methods could be used in to perform Stark deceleration and trapping of Rydberg Ps, high-precision Ps spectroscopy, and to create positron-atom bound states.

•Apr 28, 2018•0 citations

Monte Carlo Study of Ortho-Positronium Laser Cooling

Hokuto Iijima, T. Hirose, M. Irako +4 more

On the basis of three dimensional (3-D) Monte Carlo simulation, we studied details of laser cooling (Doppler cooling) of ortho-Positronium ( o -Ps) which would be applied to the achievement of Bose–Einstein condensation of positronium. The cooling is carried out by an ultraviolet laser with a wavelength of 243 nm being equivalent to the 1 S –2 P transition energy of o -Ps. For this purpose, we have constructed a laser cooling apparatus which consists of a slow positron generator and a long pulse, wide linewidth laser. A 3-D Monte Carlo calculation, which incorporated various parameters of laser beam and positronium distributions expected in the current laser cooling apparatus, revealed that 7% of o -Ps was able to be cool down to 1 K and to be confined in a relatively small volume without employing a special trap.

Journal of the Physical Society of Japan•Nov 1, 2001•4 citations

Positronium cooling in porous silica measured via Doppler spectroscopy

D. B. Cassidy, P. Crivelli, T. H. Hisakado +5 more

We have measured the kinetic energy of positronium (Ps) atoms emitted into a vacuum from a porous silica film subsequent to positron bombardment, via the Doppler spread of the linewidth of the Ps ${1}^{3}S$-${2}^{3}P$ transition. We find that the deeper in the target film that positrons are implanted the colder is the emitted Ps, an effect we attribute to cooling via collisions in the pores as the atoms diffuse back to the film surface. We observed a lower limit to the mean Ps kinetic energy associated with motion in the direction of the laser, ${E}_{x}=42\ifmmode\pm\else\textpm\fi{}3$ meV, that is consistent with conversion of the confinement energy of Ps in the 2.7-nm-diameter pores to kinetic energy in vacuum. An implication is that a porous sample would need to be composed of pores greater than around 10 nm in diameter in order to produce thermal Ps in vacuum with temperatures of less than 100 K. By performing Doppler spectroscopy on intense pulses of Ps we have experimentally demonstrated the production of many excited-state Ps atoms simultaneously, which could have numerous applications, including laser cooling and fundamental spectroscopic studies of Ps and the production of antihydrogen.

Physical Review A•Jan 29, 2010•143 citations

COOLING AND QUENCHING OF POSITRONIUM AND PROSPECT FOR A Ps BEC

Toshio Hyodo, Haruo Saito, Y. Nagashima +2 more

Realization of Bose-Einstein Condensate (BEC) of positronium (Ps), a purely leptonic particle-antiparticle bound system, is a challenging subject [1, 2]. Recently, Ivanov et al. [3] theoretically investigated the Ps-Ps scattering and showed theoretically that the scattering length for the o-Ps atoms is positive, indicating that a stable o-Ps BEC is actually possible. The condition for the BEC of the ideal Bose gas is λth > (2.612/n)1/3, where λth = h/ √ 2πmkT is the thermal de Broglie wavelength of the atom and n is the number density. This gives the critical temperature for the Ps BEC as Tc = 1.46×10−15n2/3, where Tc is in K and n is in m−3. This condition is much less severe than for the usual alkali atom BEC because λth is longer by five orders of magnitude. However, Ps has a finite lifetime: the lifetime of singlet state, para-positronium (p-Ps), is 125 ps and that of triplet state, ortho-positronium (o-Ps), is 142 ns. Thus a many-Ps system must be cooled within the lifetime of o-Ps. The short lifetime of Ps demands quick cooling and high density. The laser cooling which is employed for the accomplishment of alkali atom BEC is likely to be impractical because it takes longer time. It is also subject to relatively large recoil of the Ps atom when hit by a photon. Moreover, unless an effective method for trapping Ps in free space is developed, the system of Ps atoms diffuses and lowers its density. Platzmann and Mills [1] suggested to confine Ps in a small cavity of insulating material and let the Ps atoms give away their kinetic energy to the walls of the cavity. If one injects an intense polarized positron beam onto a material which has a micro cavity near surface, some of the positrons form Ps and are emitted into the cavity and stay there. This is expected because the work function of most of the material for Ps is negative, i.e., Ps atoms emitted into the cavity after thermalization in the material will never penetrate back into the material. They just hit the cavity walls and approach thermal equilibrium by exciting phonons. The probability of the annihilation of o-Ps with a surface electron is small if there are no paramagnetic centers on the cavity walls. It is necessary to use a polarized positron beam to make Ps. Otherwise all the o-Ps atoms are lost through mutual spin conversion into p-Ps [1, 4]. In this report we would like to discuss prospect of a Ps BEC with special attention to the following aspects [4]: (1) use of 18F for a source of an intense spin-polarized positron beams [5], (2) development of high efficiency Wmesh positron moderator, (3) emission of Ps from solid surface (4) the cooling of Ps in a cavity, and (5) the detection of a Ps BEC.

•Jan 1, 2002•0 citations

Laser excitation of positronium produced in various materials at a range of temperatures

B. S. Cooper

Methods and techniques in the production, manipulation, and accumulation of positrons in a `Surko-type' buffer-gas trap are presented. The pulsed output of the trap is optimised for laser excitation of positronium (Ps). The techniques of positron time compression and single-shot positron annihilation lifetime spectroscopy (SSPALS) are discussed in detail and used throughout the study. A small array or Ps converter materials have been characterised at various temperatures. Ps cooling as a function of positron implantation is presented and discussed. Direct laser irradiation of the samples, and the effect on the Ps yield has also been studied. In some cases, particularly at cryogenic temperatures, laser induced paramagnetic centres are formed and this has a detrimental effect on the Ps yield as they cause triplet Ps to convert to the shorter-lived singlet state. Whereas in single crystal semiconductors, the laser has an enhancing effect due to an exciton-like positron-electron surface state. Many of the Ps converter materials studied here are formed from porous structures. The long term confinement of Ps within isolated cavities has also been observed, where a lifetime measurement technique using an excitation laser is presented. General methods of Ps-laser spectroscopy are also presented and the applications of which are discussed including laser-enhanced time-of-flight spectroscopy (LEPTOF), and the production, and electrostatic guiding of highly excited Rydberg Ps. Using these techniques a crossed beam scattering experiment involving Rydberg Ps, electrons, and Argon ions was carried out. This work presents important considerations for experiments to create a laser-cooled Bose-Einstein condensate (BEC) of Ps in an engineered porous material at cryogenic temperatures.

•Mar 28, 2018•0 citations
We numerically study laser deceleration, cooling and trapping of host fast ortho-positronium (Ps) bunches as produced in silica microchannel targets using positron bunches from a Surko trap. While Doppler laser cooling routinely allows to cool neutral atom species below milli-Kelvin kinetic temperatures, the fast ground state annihilation and the high recoil shift to line-width ratio in Ps pose new challenging limitations on timing and the required laser power. Earlier theoretical work and first experiments already exhibit viable prospects for radiation pressure cooling to create unprecedented cold and dense Ps ensembles. Our extended numerical studies confirm very good prospects to simultaneously decelerate, cool and optically trap Ps atoms in a standard Doppler cooling geometry on the 13S1^3\mathrm{S}13S--23P2^3\mathrm{P}23P transition. Including the full Zeeman state manifolds and adding additional transverse lasers on the 23P2^3\mathrm{P}23P--33D3^3\mathrm{D}33D transition improves timing and final temperature to allow for optical trapping at the end. The required laser powers and geometry parameters to implement effective slowing and trapping within a time frame, where the majority of atoms is not annihilated, is in reach of current technology of mJ\mathrm{mJ}mJ energy pulses of approximately 100 ns100\ \mathrm{ns}100 ns duration. Future extensions to collectively enhance cooling and trapping in optical cavities or hollow-core fibres should finally allow fast preparation of ultra-cold Ps systems as future basis of superradiant lasing and Bose--Einstein condensates.
The field of experimental positronium physics has advanced significantly in the last few decades, with new areas of research driven by the development of techniques for trapping and manipulating positrons using Surko-type buffer gas traps. Large numbers of positrons (typically ≥106) accumulated in such a device may be ejected all at once, so as to generate an intense pulse. Standard bunching techniques can produce pulses with ns (mm) temporal (spatial) beam profiles. These pulses can be converted into a dilute Ps gas in vacuum with densities on the order of 107 cm−3 which can be probed by standard ns pulsed laser systems. This allows for the efficient production of excited Ps states, including long-lived Rydberg states, which in turn facilitates numerous experimental programs, such as precision optical and microwave spectroscopy of Ps, the application of Stark deceleration methods to guide, decelerate and focus Rydberg Ps beams, and studies of the interactions of such beams with other atomic and molecular species. These methods are also applicable to antihydrogen production and spectroscopic studies of energy levels and resonances in positronium ions and molecules. A summary of recent progress in this area will be given, with the objective of providing an overview of the field as it currently exists, and a brief discussion of some future directions.
A Surko-type positron trap has been used to produce intense positron pulses, and thus a dilute positronium (Ps) gas in vacuum with an initial density of 10^7 cm-3. This gas was excited with lasers for a variety of experiments. n = 2 atoms were prepared using a single-photon excitation scheme (1S to 2P) in controlled electric and magnetic fields for studies of Stark and Zeeman effects, measurements of Ps cooling via Doppler spectroscopy, and for the produciton of ensembles of atoms in pure 2S states. The first measurements of Ps excitation to specific Rydberg-Stark states were performed via a two-color two-photon excitation scheme ( 1S to 2P to nS/nD). Ps atoms in low-field–seeking Rydberg Stark states were prepared at the entrance of an electrostatic quadrupole guide which was used to control the trajectories and velocity distributions of the Ps atoms. These advances, together with the results from numerical simulations, suggest that these methods could be used in to perform Stark deceleration and trapping of Rydberg Ps, high-precision Ps spectroscopy, and to create positron-atom bound states.
On the basis of three dimensional (3-D) Monte Carlo simulation, we studied details of laser cooling (Doppler cooling) of ortho-Positronium ( o -Ps) which would be applied to the achievement of Bose–Einstein condensation of positronium. The cooling is carried out by an ultraviolet laser with a wavelength of 243 nm being equivalent to the 1 S –2 P transition energy of o -Ps. For this purpose, we have constructed a laser cooling apparatus which consists of a slow positron generator and a long pulse, wide linewidth laser. A 3-D Monte Carlo calculation, which incorporated various parameters of laser beam and positronium distributions expected in the current laser cooling apparatus, revealed that 7% of o -Ps was able to be cool down to 1 K and to be confined in a relatively small volume without employing a special trap.
We have measured the kinetic energy of positronium (Ps) atoms emitted into a vacuum from a porous silica film subsequent to positron bombardment, via the Doppler spread of the linewidth of the Ps 13S{1}^{3}S13S-23P{2}^{3}P23P transition. We find that the deeper in the target film that positrons are implanted the colder is the emitted Ps, an effect we attribute to cooling via collisions in the pores as the atoms diffuse back to the film surface. We observed a lower limit to the mean Ps kinetic energy associated with motion in the direction of the laser, ${E}_{x}=42\ifmmode\pm\else\textpm\fi{}3$ meV, that is consistent with conversion of the confinement energy of Ps in the 2.7-nm-diameter pores to kinetic energy in vacuum. An implication is that a porous sample would need to be composed of pores greater than around 10 nm in diameter in order to produce thermal Ps in vacuum with temperatures of less than 100 K. By performing Doppler spectroscopy on intense pulses of Ps we have experimentally demonstrated the production of many excited-state Ps atoms simultaneously, which could have numerous applications, including laser cooling and fundamental spectroscopic studies of Ps and the production of antihydrogen.
Realization of Bose-Einstein Condensate (BEC) of positronium (Ps), a purely leptonic particle-antiparticle bound system, is a challenging subject [1, 2]. Recently, Ivanov et al. [3] theoretically investigated the Ps-Ps scattering and showed theoretically that the scattering length for the o-Ps atoms is positive, indicating that a stable o-Ps BEC is actually possible. The condition for the BEC of the ideal Bose gas is λth > (2.612/n)1/3, where λth = h/ √ 2πmkT is the thermal de Broglie wavelength of the atom and n is the number density. This gives the critical temperature for the Ps BEC as Tc = 1.46×10−15n2/3, where Tc is in K and n is in m−3. This condition is much less severe than for the usual alkali atom BEC because λth is longer by five orders of magnitude. However, Ps has a finite lifetime: the lifetime of singlet state, para-positronium (p-Ps), is 125 ps and that of triplet state, ortho-positronium (o-Ps), is 142 ns. Thus a many-Ps system must be cooled within the lifetime of o-Ps. The short lifetime of Ps demands quick cooling and high density. The laser cooling which is employed for the accomplishment of alkali atom BEC is likely to be impractical because it takes longer time. It is also subject to relatively large recoil of the Ps atom when hit by a photon. Moreover, unless an effective method for trapping Ps in free space is developed, the system of Ps atoms diffuses and lowers its density. Platzmann and Mills [1] suggested to confine Ps in a small cavity of insulating material and let the Ps atoms give away their kinetic energy to the walls of the cavity. If one injects an intense polarized positron beam onto a material which has a micro cavity near surface, some of the positrons form Ps and are emitted into the cavity and stay there. This is expected because the work function of most of the material for Ps is negative, i.e., Ps atoms emitted into the cavity after thermalization in the material will never penetrate back into the material. They just hit the cavity walls and approach thermal equilibrium by exciting phonons. The probability of the annihilation of o-Ps with a surface electron is small if there are no paramagnetic centers on the cavity walls. It is necessary to use a polarized positron beam to make Ps. Otherwise all the o-Ps atoms are lost through mutual spin conversion into p-Ps [1, 4]. In this report we would like to discuss prospect of a Ps BEC with special attention to the following aspects [4]: (1) use of 18F for a source of an intense spin-polarized positron beams [5], (2) development of high efficiency Wmesh positron moderator, (3) emission of Ps from solid surface (4) the cooling of Ps in a cavity, and (5) the detection of a Ps BEC.
Methods and techniques in the production, manipulation, and accumulation of positrons in a `Surko-type' buffer-gas trap are presented. The pulsed output of the trap is optimised for laser excitation of positronium (Ps). The techniques of positron time compression and single-shot positron annihilation lifetime spectroscopy (SSPALS) are discussed in detail and used throughout the study. A small array or Ps converter materials have been characterised at various temperatures. Ps cooling as a function of positron implantation is presented and discussed. Direct laser irradiation of the samples, and the effect on the Ps yield has also been studied. In some cases, particularly at cryogenic temperatures, laser induced paramagnetic centres are formed and this has a detrimental effect on the Ps yield as they cause triplet Ps to convert to the shorter-lived singlet state. Whereas in single crystal semiconductors, the laser has an enhancing effect due to an exciton-like positron-electron surface state. Many of the Ps converter materials studied here are formed from porous structures. The long term confinement of Ps within isolated cavities has also been observed, where a lifetime measurement technique using an excitation laser is presented. General methods of Ps-laser spectroscopy are also presented and the applications of which are discussed including laser-enhanced time-of-flight spectroscopy (LEPTOF), and the production, and electrostatic guiding of highly excited Rydberg Ps. Using these techniques a crossed beam scattering experiment involving Rydberg Ps, electrons, and Argon ions was carried out. This work presents important considerations for experiments to create a laser-cooled Bose-Einstein condensate (BEC) of Ps in an engineered porous material at cryogenic temperatures.