Simple analytic pulse-shaping techniques are of great practical utility in quantum control, with prime examples being the DRAG method for suppressing leakage in superconducting microwave gates and the transitionless-driving approach to shortcuts-to-adiabaticity. Standard versions of these methods require two orthogonal control channels, with the second channel effectively breaking time-reversal symmetry. This appears to rule out their use in settings with only a single real-valued control field, such as the kind of baseband flux control that is common in many superconducting circuit architectures. We show here that a simple analytic pulse-shaping technique derived via a Magnus expansion is effective even with just a single baseband control channel. We demonstrate its efficacy by simulating a two-qubit gate between transmons realized with a tunable coupler and baseband flux pulses. Our corrections dramatically reduce non-adiabatic leakage caused by ramping the coupler: for realistic device parameters, leakage in a fast iSWAP gate is suppressed by up to three orders of magnitude. Our approach is general, goes beyond simply suppressing unwanted spectral weight at leakage transitions, and can be applied to a variety of platforms.
Simple analytic pulse-shaping techniques are of great practical utility in quantum control, with prime examples being the DRAG method for suppressing leakage in superconducting microwave gates and the transitionless-driving approach to shortcuts-to-adiabaticity. Standard versions of these methods require two orthogonal control channels, with the second channel effectively breaking time-reversal symmetry. This appears to rule out their use in settings with only a single real-valued control field, such as the kind of baseband flux control that is common in many superconducting circuit architectures. We show here that a simple analytic pulse-shaping technique derived via a Magnus expansion is effective even with just a single baseband control channel. We demonstrate its efficacy by simulating a two-qubit gate between transmons realized with a tunable coupler and baseband flux pulses. Our corrections dramatically reduce non-adiabatic leakage caused by ramping the coupler: for realistic device parameters, leakage in a fast iSWAP gate is suppressed by up to three orders of magnitude. Our approach is general, goes beyond simply suppressing unwanted spectral weight at leakage transitions, and can be applied to a variety of platforms.
Fast, high-fidelity two-qubit gates are a key requirement for fault-tolerant quantum computation. Tunable coupler architectures provide a flexible approach for implementing entangling gates through flux control with large on-off ratios, but fast flux modulation can induce diabatic transitions and population leakage to non-computational states, limiting gate performance. Here we present an analytical flux control method enabling derivative removal by adiabatic gate (Φ-DRAG) for suppressing leakage in flux tunable two-qubit gates. We show that Φ-DRAG differs fundamentally from conventional microwave implementations and derive modified flux modulation protocols that suppress leakage below 10−4 for fast entangling gates. The method remains effective across a range of asymmetry between qubit anharmonicities and different circuit parameters, enabling high-fidelity two-qubit gates within the fifteen nanosecond range.
High-fidelity control of superconducting qubits requires carefully shaped microwave pulses to avoid several different kinds of error at once. This article is a pedagogical bridging text aimed at upper-level undergraduate and early graduate students who have completed an introductory quantum mechanics course and a first course in quantum computing or quantum information, but who have not yet encountered the physical implementation of qubit gates. We integrate physical intuition for pulse design, analytical gate-level descriptions, and practical hardware considerations into a single, derivation-driven narrative, with explicit learning objectives. We begin with simple pulse envelopes and their spectral properties, showing how finite bandwidth produces leakage outside the computational subspace. This motivates the derivative removal by adiabatic gate (DRAG) technique, which we derive explicitly using the Magnus expansion, obtaining a clear, order-by-order account of which physical error channel appears at which order and why DRAG's cancellation is necessarily incomplete. We discuss the practical hardware realities of control pulse generation, focusing on arbitrary waveform generators (AWG), local oscillators (LO), and IQ mixing. Finally, we extend the discussion to two-qubit operation via the cross-resonance gate, and interpret how driving the control qubit at the target qubit's transition frequency necessarily produces several unwanted interaction terms alongside the desired one, and how successive generations of pulse-engineering strategies have been designed to suppress them.
Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024
Unlocking a fast adiabatic CZ gate and exact residual ZZ cancellation between fixed-frequency transmons using a floating tunable coupler
Tunable couplers in superconducting qubit architectures enable strong qubit-qubit interactions for two-qubit gates while suppressing unwanted coupling during single-qubit operations. However, achieving low error rates for fast two-qubit gates remains challenging, as suppressing leakage and non-adiabatic errors typically requires specialized qubit, coupler, or pulse designs, often at the expense of an idling ZZ=0 condition. In this work, we demonstrate that a symmetric floating tunable coupler provides a natural platform for fast, high-fidelity adiabatic controlled-Z (CZ) gates. Its favorable energy-level structure eliminates the conventional trade-off between rapid conditional-phase accumulation and adiabatic evolution while preserving exact cancellation of residual ZZ interaction at idling. This architecture exhibits intrinsic robustness to non-adiabatic transitions, even under simple flux modulation waveforms. To push performance at short gate durations, where maintaining adiabaticity becomes more challenging despite the favorable level structure, we introduce pulse-shaping techniques based on the instantaneous adiabatic factor that further suppress non-adiabatic errors. We experimentally realize a 24 ns adiabatic CZ gate with fidelity exceeding 99.9% and stable operation over several hours.
Leakage to noncomputational states limits the speed of single-qubit gates in weakly anharmonic transmons. Conventional pulse-shaping methods, including derivative removal by adiabatic gate (DRAG), primarily suppress the leakage remaining at the end of a gate. Here we demonstrate that endpoint leakage and the transient leakage population that accumulates during the gate represent distinct control objectives. Endpoint leakage is associated with the drive spectrum at the anharmonicity, whereas transient exposure depends on spectral weight over a finite frequency band and governs the additional leakage induced by dephasing. A spectral null at the leakage transition therefore suppresses the endpoint amplitude without necessarily reducing transient exposure. Based on this distinction, we introduce a path--endpoint separation pulse that combines transient-path shaping with a two-tone endpoint correction. For a 10 ns RX(π/2) gate with an anharmonicity magnitude of 0.2 GHz, numerical simulations show a 21% reduction in transient exposure relative to cosine DRAG and a corresponding 20% reduction in dephasing-induced excess leakage. The two correction tones further suppress residual leakage through the ∣2⟩ and ∣3⟩ channels, lowering the coherent endpoint leakage from approximately 7×10−7 to 3×10−8 without increasing transient exposure. These results establish transient exposure and endpoint leakage as complementary targets for the design of fast transmon gates.
A fundamental challenge in quantum computing is to increase the number of operations within the qubit coherence time. While this can be achieved by decreasing the gate duration, the use of shorter signals increases their bandwidth and can cause leakage into energetically separated states. A common method to suppress leakage for short pulses is the Derivative Removal by Adiabatic Gate (DRAG) method, which, however, relies on IQ modulation of radio-frequency (RF) signals, thus cannot be applied to the baseband signals, e.g., for semiconductor spin qubits. This paper proposes a novel technique, Delayed Leakage Reduction (DLR), that suppresses leakage at targeted frequencies even for baseband control by using time-delayed repetitions of the control signal to enable rapid, high-fidelity operations. We apply DLR on the adiabatic CZ gate between two spin qubits and achieve fidelities exceeding 99.9% within 9.4 ns for a resonance frequency difference of only 100 MHz. Towards the experimental realization of the proposed control method, we also assess the impact on the fidelity of the sampling rate, noise, and signal quantization of the electronic hardware generating the control pulse, thus setting the minimum hardware requirements for any experimental demonstration.