Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2609.10698

Demonstration of a logical Bell-state measurement beyond the linear-optical limit

Shreya Kumar, Simon D. Reiß, Peter van Loock, Stefanie Barz

quant-phSubmitted Sep 9, 2026• Announced Sep 11, 2026• 0 citations
arXivHTMLPDF

Abstract

Fault tolerance is essential for scalable quantum technologies and is enabled by quantum error-correction codes. Bell-state measurements (BSMs) are a fundamental building block for modern quantum technologies such as measurement-based quantum computation and fusion-based quantum computation, as well as quantum networks. Therefore, performing BSMs on error-corrected qubits is a necessary step for achieving fault tolerance in these applications. In this work, we realise a logical BSM using linear optics, based on a two-qubit repetition code, an instance of a quantum parity code that allows detection of bit-flip errors, and experimentally achieve a mean success probability of (70.8 +/- 0.4)%. While standard linear-optical BSMs are fundamentally limited to a maximum success probability of 50%, this increased success probability enables higher secure key rates in quantum communication and facilitates the generation of large graph states for quantum computation. Since fault-tolerant schemes require error-correction codes regardless, this improvement comes at no additional resource overhead. Our results demonstrate that error-correction codes can be used to surpass the linear-optics limit of BSMs, which is an important step towards practical, fault-tolerant, and scalable photonic quantum technologies.

Comments
11 pages, 6 figures

Related papers

Boosted Bell-state measurements for photonic quantum computation

Nico Hauser, Matthias J. Bayerbach, Simone Evaldo D’Aurelio +5 more

Abstract Fault-tolerant fusion-based photonic quantum computing (FBQC) greatly relies on entangling two-photon measurements, called fusions. These fusions can be realized using linear-optical projective Bell-state measurements (BSMs). These linear-optical BSMs are limited to a success probability of 50%, greatly reducing the performance of FBQC schemes. The performance of FBQC can be improved using boosting, thus achieving higher success probabilities by adding additional resources. Here, we realize a boosted BSM using a 4 × 4 multiport splitter and an additional entangled photon pair, allowing for a success probability of up to 75%. In our experiment, we obtain a success probability for our boosted BSM of (69.3 ± 0.3)%, clearly exceeding the 50% limit. We further demonstrate the significance of our boosted BSM for FBQC, showing a threefold increase in robustness to photon loss and a significant reduction of the logical error rates.

arXiv:2410.16380•npj Quantum Information•Mar 8, 2025•14 citations

Optimal logical Bell measurements on stabilizer codes with linear optics

Simon D. Reiß, Peter van Loock

Bell measurements (BMs) are ubiquitous in quantum information and technology. They are basic elements for quantum commmunication, computation, and error correction. In particular, when performed on logical qubits encoded in physical photonic qubits, they allow for a read-out of stabilizer syndrome information to enhance loss tolerance in qubit-state transmission and fusion. However, even in an ideal setting without photon loss, BMs cannot be done perfectly based on the simplest experimental toolbox of linear optics. Here we demonstrate that any logical BM on stabilizer codes can always be mapped onto a single physical BM perfomed on any qubit pair from the two codes. As a necessary condition for the success of a logical BM, this provides a general upper bound on its success probability, especially ruling out the possibility that the stabilizer information obtainable from only partially succeeding, physical linear-optics BMs could be combined into the full logical stabilizer information. We formulate sufficient criteria to find schemes for which a single successful BM on the physical level will always allow to obtain the full logical information by suitably adapting the subsequent physical measurements. Our approach based on stabilizer group theory is generally applicable to any stabilizer code, which we demonstrate for quantum parity, five-qubit, standard and rotated planar surface, tree, and seven-qubit Steane codes. Our schemes attain the general upper bound for all these codes, while this bound had previously only been reached for the quantum parity code.

quant-pharXiv:2601.08820•Physical Review A•Jan 14, 2026•0 citations

Error Correction in a Distributed Quantum Computer

E. M. Ainley, A. Agrawal, T. Araki +12 more

Building fault-tolerant quantum computers with large numbers of logical qubits requires both scalable hardware architectures and error-correcting codes that make efficient use of physical qubits. Photonic interconnects address both of these challenges by allowing the physical qubits to be distributed across multiple processors while providing the non-local connectivity necessary to implement resource-efficient codes such as high-rate quantum low-density parity-check (qLDPC) codes. A key requirement for realising this architecture is the ability to perform stabiliser measurements between remote processors, which has not previously been demonstrated experimentally. Here we report the first experimental demonstration of distributed quantum error detection and correction. We generate entanglement between network qubits in two separate trapped-ion processors and use it to perform remote syndrome measurements on data qubits. We first realise a distributed [[2, 1, 1]] repetition code, detecting phase-flip errors on a logical qubit encoded across the two modules in real time and suppressing logical errors. We then combine these mid-circuit syndrome measurements with real-time feedforward to actively correct arbitrary single-qubit Pauli errors on a distributed Bell state. These results provide an experimental foundation for quantum error correction (QEC) across modular quantum architectures.

quant-pharXiv:2609.13065•Sep 14, 2026•0 citations

Analysis of optical loss thresholds in the fusion-based quantum computing architecture

Aleksandr Melkozerov, Ashot S. Avanesov, I. V. Dyakonov +1 more

Bell state measurements (BSMs) play a significant role in quantum information and quantum computing, in particular in fusion-based quantum computing (FBQC). The FBQC model is a framework for universal quantum computing, provided that we are able to perform entangling measurements, called fusions, on qubits within small entangled resource states. Here, we analyze the usage of different linear-optical BSM circuits as fusions in the FBQC schemes and numerically evaluate hardware requirements for fault-tolerance in this framework. We examine and compare the performance of several BSM circuits with varying additional resources and estimate the requirements on losses for every component of the linear-optical realization of fusions under which errors in fusion networks caused by these losses can be corrected. Our results show that fault-tolerant quantum computing in the FBQC model is possible with currently achievable levels of optical losses in an integrated photonic implementation, provided that we can create and detect single photons of the resource states with a total marginal efficiency higher than 0.973.

arXiv:2403.14811•APL Quantum•Sep 1, 2024•8 citations

Bell-state measurement exceeding 50% success probability with linear optics

Matthias J. Bayerbach, Simone Evaldo D’Aurelio, Peter van Loock +1 more

Bell-state projections serve as a fundamental basis for most quantum communication and computing protocols today. However, with current Bell-state measurement schemes based on linear optics, only two of four Bell states can be identified, which means that the maximum success probability of this vital step cannot exceed 50%. Here, we experimentally demonstrate a scheme that amends the original measurement with additional modes in the form of ancillary photons, which leads to a more complex measurement pattern, and ultimately a higher success probability of 62.5%. Experimentally, we achieve a success probability of (57.9 ± 1.4)%, a substantial improvement over the conventional scheme. With the possibility of extending the protocol to a larger number of ancillary photons, our work paves the way toward more efficient realizations of quantum technologies based on Bell-state measurements.

Science Advances•Aug 9, 2023•75 citations

Fault-Tolerant Heisenberg-Limited Quantum Metrology with Bosonic Probes

Daniel G. Li, Lorcán O Conlon, Yu-Xin Wang +3 more

Quantum sensors have been shown to enable more precise measurements than classical sensors. By using entanglement and coherent evolution, the estimation error can be made to scale better in interrogation time, photon count, and other resources, achieving Heisenberg-limited scaling. However, environmental noise and hardware errors typically destroy the coherence of the sensitive quantum states. This motivates the use of fault-tolerant techniques to create more robust quantum sensing protocols. Such fault-tolerant quantum sensing approaches have been shown to enhance sensitivity for qubit systems, but many practical sensors require bosonic probes. In this paper, we propose a fault-tolerant protocol using bosons to estimate displacements in the presence of dephasing noise. We construct an optimal error-correcting code under a mean photon-number constraint. Controlled displacements couple the probe to a repetition-encoded qubit register, while repeated boson-parity measurements and resets remove probe noise without erasing the stored logical phase. Under circuit-level bit-flip noise, a distance-$d$ code suppresses logical failures to order $p^{(d+1)/2}$. We show that, for a decay rate $γ_A$, a total sensing time $T$ and a mean photon number budget $N$, and for sufficiently small residual signals, the Fisher information scales as $NT^2$ over interrogation times of order $γ_A^{-(d+1)/2}$. This is a significant improvement over the non-fault-tolerant approach that achieves Heisenberg scaling only for a total time $\mathcal O(γ_A^{-1})$.

quant-pharXiv:2610.40405•Oct 30, 2026•0 citations
Fault tolerance is essential for scalable quantum technologies and is enabled by quantum error-correction codes. Bell-state measurements (BSMs) are a fundamental building block for modern quantum technologies such as measurement-based quantum computation and fusion-based quantum computation, as well as quantum networks. Therefore, performing BSMs on error-corrected qubits is a necessary step for achieving fault tolerance in these applications. In this work, we realise a logical BSM using linear optics, based on a two-qubit repetition code, an instance of a quantum parity code that allows detection of bit-flip errors, and experimentally achieve a mean success probability of (70.8 +/- 0.4)%. While standard linear-optical BSMs are fundamentally limited to a maximum success probability of 50%, this increased success probability enables higher secure key rates in quantum communication and facilitates the generation of large graph states for quantum computation. Since fault-tolerant schemes require error-correction codes regardless, this improvement comes at no additional resource overhead. Our results demonstrate that error-correction codes can be used to surpass the linear-optics limit of BSMs, which is an important step towards practical, fault-tolerant, and scalable photonic quantum technologies.
Abstract Fault-tolerant fusion-based photonic quantum computing (FBQC) greatly relies on entangling two-photon measurements, called fusions. These fusions can be realized using linear-optical projective Bell-state measurements (BSMs). These linear-optical BSMs are limited to a success probability of 50%, greatly reducing the performance of FBQC schemes. The performance of FBQC can be improved using boosting, thus achieving higher success probabilities by adding additional resources. Here, we realize a boosted BSM using a 4 × 4 multiport splitter and an additional entangled photon pair, allowing for a success probability of up to 75%. In our experiment, we obtain a success probability for our boosted BSM of (69.3 ± 0.3)%, clearly exceeding the 50% limit. We further demonstrate the significance of our boosted BSM for FBQC, showing a threefold increase in robustness to photon loss and a significant reduction of the logical error rates.
Bell measurements (BMs) are ubiquitous in quantum information and technology. They are basic elements for quantum commmunication, computation, and error correction. In particular, when performed on logical qubits encoded in physical photonic qubits, they allow for a read-out of stabilizer syndrome information to enhance loss tolerance in qubit-state transmission and fusion. However, even in an ideal setting without photon loss, BMs cannot be done perfectly based on the simplest experimental toolbox of linear optics. Here we demonstrate that any logical BM on stabilizer codes can always be mapped onto a single physical BM perfomed on any qubit pair from the two codes. As a necessary condition for the success of a logical BM, this provides a general upper bound on its success probability, especially ruling out the possibility that the stabilizer information obtainable from only partially succeeding, physical linear-optics BMs could be combined into the full logical stabilizer information. We formulate sufficient criteria to find schemes for which a single successful BM on the physical level will always allow to obtain the full logical information by suitably adapting the subsequent physical measurements. Our approach based on stabilizer group theory is generally applicable to any stabilizer code, which we demonstrate for quantum parity, five-qubit, standard and rotated planar surface, tree, and seven-qubit Steane codes. Our schemes attain the general upper bound for all these codes, while this bound had previously only been reached for the quantum parity code.
Building fault-tolerant quantum computers with large numbers of logical qubits requires both scalable hardware architectures and error-correcting codes that make efficient use of physical qubits. Photonic interconnects address both of these challenges by allowing the physical qubits to be distributed across multiple processors while providing the non-local connectivity necessary to implement resource-efficient codes such as high-rate quantum low-density parity-check (qLDPC) codes. A key requirement for realising this architecture is the ability to perform stabiliser measurements between remote processors, which has not previously been demonstrated experimentally. Here we report the first experimental demonstration of distributed quantum error detection and correction. We generate entanglement between network qubits in two separate trapped-ion processors and use it to perform remote syndrome measurements on data qubits. We first realise a distributed [[2, 1, 1]] repetition code, detecting phase-flip errors on a logical qubit encoded across the two modules in real time and suppressing logical errors. We then combine these mid-circuit syndrome measurements with real-time feedforward to actively correct arbitrary single-qubit Pauli errors on a distributed Bell state. These results provide an experimental foundation for quantum error correction (QEC) across modular quantum architectures.
Bell state measurements (BSMs) play a significant role in quantum information and quantum computing, in particular in fusion-based quantum computing (FBQC). The FBQC model is a framework for universal quantum computing, provided that we are able to perform entangling measurements, called fusions, on qubits within small entangled resource states. Here, we analyze the usage of different linear-optical BSM circuits as fusions in the FBQC schemes and numerically evaluate hardware requirements for fault-tolerance in this framework. We examine and compare the performance of several BSM circuits with varying additional resources and estimate the requirements on losses for every component of the linear-optical realization of fusions under which errors in fusion networks caused by these losses can be corrected. Our results show that fault-tolerant quantum computing in the FBQC model is possible with currently achievable levels of optical losses in an integrated photonic implementation, provided that we can create and detect single photons of the resource states with a total marginal efficiency higher than 0.973.
Bell-state projections serve as a fundamental basis for most quantum communication and computing protocols today. However, with current Bell-state measurement schemes based on linear optics, only two of four Bell states can be identified, which means that the maximum success probability of this vital step cannot exceed 50%. Here, we experimentally demonstrate a scheme that amends the original measurement with additional modes in the form of ancillary photons, which leads to a more complex measurement pattern, and ultimately a higher success probability of 62.5%. Experimentally, we achieve a success probability of (57.9 ± 1.4)%, a substantial improvement over the conventional scheme. With the possibility of extending the protocol to a larger number of ancillary photons, our work paves the way toward more efficient realizations of quantum technologies based on Bell-state measurements.
Quantum sensors have been shown to enable more precise measurements than classical sensors. By using entanglement and coherent evolution, the estimation error can be made to scale better in interrogation time, photon count, and other resources, achieving Heisenberg-limited scaling. However, environmental noise and hardware errors typically destroy the coherence of the sensitive quantum states. This motivates the use of fault-tolerant techniques to create more robust quantum sensing protocols. Such fault-tolerant quantum sensing approaches have been shown to enhance sensitivity for qubit systems, but many practical sensors require bosonic probes. In this paper, we propose a fault-tolerant protocol using bosons to estimate displacements in the presence of dephasing noise. We construct an optimal error-correcting code under a mean photon-number constraint. Controlled displacements couple the probe to a repetition-encoded qubit register, while repeated boson-parity measurements and resets remove probe noise without erasing the stored logical phase. Under circuit-level bit-flip noise, a distance-ddd code suppresses logical failures to order p(d+1)/2p^{(d+1)/2}p(d+1)/2. We show that, for a decay rate γAγ_AγA​, a total sensing time TTT and a mean photon number budget NNN, and for sufficiently small residual signals, the Fisher information scales as NT2NT^2NT2 over interrogation times of order γA−(d+1)/2γ_A^{-(d+1)/2}γA−(d+1)/2​. This is a significant improvement over the non-fault-tolerant approach that achieves Heisenberg scaling only for a total time O(γA−1)\mathcal O(γ_A^{-1})O(γA−1​).