Quantum processors with native multi-qubit gates may offer very efficient implementations of near-term quantum algorithms on noisy hardware. Here, we introduce the multiunimon, a superconducting multimode circuit that encodes multiple qubits and enables native multi-qubit gates in a device consisting of a single Josephson junction embedded in a coplanar waveguide structure. Closely related to the unimon qubit, it inherits properties such as high anharmonicity, full protection against low-frequency charge noise, and partial protection against flux noise. By designing such a three-qubit device with Josephson-to-inductive energy ratio above unity and using a leakage-aware encoding scheme for the computational states, we simulate all twelve different controlled-controlled-NOT gates with a mean fidelity of 99.5% with simple sine-squared pulses of comparable length to single-qubit gates. The performance is limited by incoherent errors dominated by dielectric loss. With improvements in noise protection, design, and pulse shaping, the simulations suggest that fidelities approaching 99.99% are within reach. Our results demonstrate the potential of the multiunimon as a highly connected multi-qubit unit for larger superconducting quantum processors.
Quantum processors with native multi-qubit gates may offer very efficient implementations of near-term quantum algorithms on noisy hardware. Here, we introduce the multiunimon, a superconducting multimode circuit that encodes multiple qubits and enables native multi-qubit gates in a device consisting of a single Josephson junction embedded in a coplanar waveguide structure. Closely related to the unimon qubit, it inherits properties such as high anharmonicity, full protection against low-frequency charge noise, and partial protection against flux noise. By designing such a three-qubit device with Josephson-to-inductive energy ratio above unity and using a leakage-aware encoding scheme for the computational states, we simulate all twelve different controlled-controlled-NOT gates with a mean fidelity of 99.5% with simple sine-squared pulses of comparable length to single-qubit gates. The performance is limited by incoherent errors dominated by dielectric loss. With improvements in noise protection, design, and pulse shaping, the simulations suggest that fidelities approaching 99.99% are within reach. Our results demonstrate the potential of the multiunimon as a highly connected multi-qubit unit for larger superconducting quantum processors.
Abstract Superconducting qubits seem promising for useful quantum computers, but the currently wide-spread qubit designs and techniques do not yet provide high enough performance. Here, we introduce a superconducting-qubit type, the unimon, which combines the desired properties of increased anharmonicity, full insensitivity to dc charge noise, reduced sensitivity to flux noise, and a simple structure consisting only of a single Josephson junction in a resonator. In agreement with our quantum models, we measure the qubit frequency, ω01/(2π), and increased anharmonicity α/(2π) at the optimal operation point, yielding, for example, 99.9% and 99.8% fidelity for 13 ns single-qubit gates on two qubits with (ω01, α) = (4.49 GHz, 434 MHz) × 2π and (3.55 GHz, 744 MHz) × 2π, respectively. The energy relaxation seems to be dominated by dielectric losses. Thus, improvements of the design, materials, and gate time may promote the unimon to break the 99.99% fidelity target for efficient quantum error correction and possible useful quantum advantage with noisy systems.
Abstract Superconducting qubits seem promising for useful quantum computers, but the currently wide-spread qubit designs and techniques do not yet provide high enough performance. Here, we introduce a superconducting-qubit type, the unimon, which combines the desired properties of increased anharmonicity, full insensitivity to dc charge noise, reduced sensitivity to flux noise, and a simple structure consisting only of a single Josephson junction in a resonator. In agreement with our quantum models, we measure the qubit frequency, ω01/(2π), and increased anharmonicity α/(2π) at the optimal operation point, yielding, for example, 99.9% and 99.8% fidelity for 13 ns single-qubit gates on two qubits with (ω01, α) = (4.49 GHz, 434 MHz) × 2π and (3.55 GHz, 744 MHz) × 2π, respectively. The energy relaxation seems to be dominated by dielectric losses. Thus, improvements of the design, materials, and gate time may promote the unimon to break the 99.99% fidelity target for efficient quantum error correction and possible useful quantum advantage with noisy systems.
Inductively shunted superconducting qubits, such as the unimon qubit, combine high anharmonicity with protection from low-frequency charge noise, positioning them as promising candidates for the implementation of fault-tolerant superconducting quantum computers. In this work, we develop accurate closed-form approximations for the frequency and anharmonicity of the unimon qubit that are also applicable to any single-mode superconducting qubits with a single-well potential profile, such as the quarton qubit or the kinemon qubit. We use these results to theoretically explore the single-qubit gate fidelity and coherence times across the parameter space of qubits with a single-well potential. We find that the gate fidelity can be optimized by tuning the Hamiltonian to (1) a high qubit mode impedance of 1 – 2 k Ω , (2) a low qubit frequency of 1 GHz, (3) and a perfect cancellation of the linear inductance and the Josephson inductance attained at a flux bias of half flux quantum. According to our theoretical analysis, the proposed qubit parameters have the potential to enhance the single-qubit gate fidelity of the unimon beyond 99.99%, even without significant improvements to the dielectric quality factor or the flux noise density measured for the first unimon qubits. Furthermore, we compare unimon, transmon, and fluxonium qubits in terms of their energy spectra and qubit coherence subject to dielectric loss and 1 / f flux noise in order to highlight the advantages and limitations of each qubit type.
Superconducting devices as quantum bits (qubits) are one of the most promising candidates for implementing a practical quantum computer. Over the last decade, quantum coherence times of superconducting qubits have been continuously improved. Operating qubits in noise insensitive points, eliminating the participation of the lossy materials, and better isolation from environment increased the decoherence times from nanoseconds to tens of microseconds. One recent approach on the qubit design is to shunt the Josephson junctions with large capacitors to reduce the sensitivity to noise and to redistribute the stored electromagnetic energy in a well-engineered area. This approach was first applied on charge qubits and later adopted to other types of superconducting qubits. \n \nIn this thesis, we present the design and the characterization of a three-Josephson junction superconducting circuit with three large shunt capacitors. We present experiments on decoherence in the circuit used as a qubit. The qubit relaxation time T₁ is reaching as high as 47 μs and the spin-echo dephasing time T₂ = 9.4 μs. In addition, we present spectroscopy experiments and decoherence characterization in the qutrit subspace formed by the lowest three energy levels. The spectroscopy data is in excellent agreement with the complete circuit model based on the system capacitance matrix. At the flux symmetry point, the circuit has a large anharmonicity, defined as the difference between the 1-2 and 0-1 transition frequencies, approaching 2π × 3.7 GHz, which is enabling fast single qubit operations. We performed randomized benchmarking with the qubit gates with a duration of 1.62 ns and an average gate fidelity of 99.9%. \n \nMoreover, we present experiments with multi-level control in qutrit subspace, formed by the lowest three energy levels. We demonstrate a single step experimental implementation of a generalized Walsh-Hadamard gate. We use a decomposition of the quantum gate into two unitary operations, one implemented by an off-diagonal Hamiltonian and the other implemented by a diagonal Hamiltonian. The off-diagonal Hamiltonian is obtained by the simultaneous driving of the transitions between levels 0-1, 1-2, and 0-2, with the latter being a two-photon process. The diagonal Hamiltonian is effectively implemented by appropriately shifting the phases of adjacent pulses. The gate is characterized using tomography process and the average fidelity exceeds 90%, in good agreement with numerical simulations that take into account the multi-level structure of the system.
Native multi-qubit gates could reduce the overhead associated with decompositions into single- and two-qubit operations, but whether they can simultaneously provide high fidelity, simple control and robustness against parasitic interactions in scalable architectures remains unclear. Here we experimentally realize a 65-ns native controlled-controlled-phase operation, locally equivalent to the Toffoli gate, with a fidelity of 99.39(5)% in a three-qubit processor unit based on fluxonium qubits coupled via a microwave-driven transmon coupler. The implemented operation would require CZ fidelities of approximately 99.94% if realized through a conventional decomposition. The gate is implemented with a single control pulse, that relies on a simple calibration procedure yielding coherence-limited performance. This processor unit naturally extends to scalable two-dimensional layouts with low parasitic interactions. Altogether, these results establish native multi-qubit gates as a viable hardware-efficient primitive for scalable superconducting quantum processors.
We consider a superconducting half-wavelength resonator that is grounded at its both ends and contains a single Josephson junction. Previously this circuit was considered as a unimon qubit in the single-mode approximation where dc-phase-biasing the junction to π leads to increased anharmonicity and 99.9% experimentally observed single-qubit gate fidelity. Inspired by the promising first experimental results, we develop here a theoretical and numerical model for the detailed understanding of the multimode physics of the unimon circuit. To this end, first, we consider the high-frequency modes of the unimon circuit and find that even though these modes are at their ground state, they imply a significant renormalization to the Josephson energy. We introduce an efficient method to fully account for the relevant modes and show that unexcited high-lying modes lead to corrections in the qubit energy and anharmonicity. Interestingly, provided that the junction is offset from the middle of the circuit, we find strong cross-Kerr coupling strengths between a few low-lying modes. This observation paves the way for the utilization of the multimode structure, for example, as several qubits embedded into a single unimon circuit. Published by the American Physical Society 2024