Quantum metrology achieves Heisenberg-limited precision in single-parameter estimation, but its multiparameter extension is fundamentally constrained by both parameter-encoding and measurement incompatibility. Noncommuting signal generators may cause incompatible parameter-encoding, preventing the quantum Fisher information matrix from simultaneously achieving the Heisenberg scale for all parameters. Due to incompatible optimal measurements, the classical Fisher information matrix represents the practical attainable precision. Here, we introduce a multiparameter metrology framework based on indefinite evolution (IE), in which different control operations and signal reversal are placed in a coherent superposition. For a single-qubit probe with mutually orthogonal signal generators, IE enables compatible parameter encoding and optimal measurement without the signal reversal. For parallel generators, where only signal reversal realized by its generator is available, IE can achieve the same performance. We further extend this mechanism to noisy, many-body, and high-dimensional probes, and establish general conditions for achieving the simultaneous Heisenberg-limit. In contrast, definite evolution cannot achieve the same performance under compatible optimal measurements, even when signal reversal is available. Our results identify IE as an operational resource for overcoming multiparameter incompatibility and open a route toward attainable Heisenberg-limited sensing in interferometric platforms.
Quantum metrology achieves Heisenberg-limited precision in single-parameter estimation, but its multiparameter extension is fundamentally constrained by both parameter-encoding and measurement incompatibility. Noncommuting signal generators may cause incompatible parameter-encoding, preventing the quantum Fisher information matrix from simultaneously achieving the Heisenberg scale for all parameters. Due to incompatible optimal measurements, the classical Fisher information matrix represents the practical attainable precision. Here, we introduce a multiparameter metrology framework based on indefinite evolution (IE), in which different control operations and signal reversal are placed in a coherent superposition. For a single-qubit probe with mutually orthogonal signal generators, IE enables compatible parameter encoding and optimal measurement without the signal reversal. For parallel generators, where only signal reversal realized by its generator is available, IE can achieve the same performance. We further extend this mechanism to noisy, many-body, and high-dimensional probes, and establish general conditions for achieving the simultaneous Heisenberg-limit. In contrast, definite evolution cannot achieve the same performance under compatible optimal measurements, even when signal reversal is available. Our results identify IE as an operational resource for overcoming multiparameter incompatibility and open a route toward attainable Heisenberg-limited sensing in interferometric platforms.
Estimating multiple unknown parameters simultaneously is essential for practical quantum sensing. However, it faces a fundamental challenge: the optimal strategy for estimating one parameter is often incompatible with that for another, making it impossible to simultaneously achieve the ultimate precision limits for all parameters. Here we develop a general and efficient computational framework that jointly optimizes probe states, control operations, and measurements across different strategy families, including parallel, sequential, and those with indefinite causal order. Our approach provides exact semidefinite-program formulations for several precision bounds, including the Holevo, Nagaoka-Hayashi, and quantum Cramér-Rao bounds. We demonstrate the capabilities of the framework in multiparameter magnetometry and frequency estimation, identifying optimal protocols within each class and revealing a strict hierarchy among the achievable performances of different classes in the multiparameter regime. The framework also directly incorporates resource constraints, such as energy budgets, enabling systematic investigation of experimentally realistic sensing scenarios. Furthermore, we develop a finite-memory optimization method for sequential strategies with restricted ancillary-memory dimension. By decomposing the protocol into initial probe preparation and intermediate control operations, this method provides a practical route to designing resource-constrained sequential sensing schemes. Our work establishes a versatile computational tool for determining fundamental precision limits and designing optimal quantum-sensing protocols in complex multiparameter settings.
Precise estimation of physical parameters underpins both scientific discovery and technological development. A central goal of quantum metrology and sensing is to exploit quantum resources like entanglement to devise optimal strategies for estimating physical parameters as precisely as possible. While substantial progress has been made in single-parameter quantum metrology, the multiparameter scenario remains significantly more challenging due to the issue of parameter incompatibility. In this work, we present a unified and computable approach for the simultaneous estimation of multiple parameters that attains the ultimate precision permitted by quantum mechanics. The core of our approach is to integrate the quantum tester formalism into the recently proposed tight Cramér-Rao type bound. This formulation enables us to figure out the highest achievable precision via upper and lower bounds that are computable via semidefinite programs. More importantly, within this formulation, diverse quantum resources, including entanglement, coherence, quantum control, and indefinite causal order, are treated on equal footing and systematically optimized for the purpose of achieving the ultimate precision in multiparameter estimation. As a result, our approach is applicable to various metrological strategies both in the presence and absence of noise. To demonstrate its utility, we revisit three-dimensional magnetic-field estimation, uncovering the strengths and limitations of existing analytical results and further establishing a strict hierarchy among different types of strategies.
We study optimal quantum sensing of multiple physical parameters using repeated measurements. In this scenario, the Fisher information framework sets the fundamental limits on sensing performance, yet the optimal states and corresponding measurements that attain these limits remain to be discovered. To address this, we extend the Fisher information approach with a second optimality requirement for a sensor to provide unambiguous estimation of unknown parameters. We propose a systematic method integrating Fisher information and Bayesian approaches to quantum metrology to identify the combination of input states and measurements that satisfies both optimality criteria. Specifically, we frame the optimal sensing problem as an optimization of an asymptotic Bayesian cost function that can be efficiently solved numerically and, in many cases, analytically. We refer to the resulting optimal sensor as a `quantum compass' solution, which serves as a direct multiparameter counterpart to the Greenberger-Horne-Zeilinger state-based interferometer, renowned for achieving the Heisenberg limit in single-parameter metrology. We provide exact quantum compass solutions for paradigmatic multiparameter problem of sensing two and three parameters using an SU(2) sensor. Our metrological cost function opens avenues for quantum variational techniques to design low-depth quantum circuits approaching the optimal sensing performance in the many-repetition scenario. We demonstrate this by constructing simple quantum circuits that achieve the Heisenberg limit for vector field and 3D rotations estimation using a limited set of gates available on a trapped-ion platform. Our work introduces and optimizes sensors for a practical notion of optimality, keeping in mind the ultimate goal of quantum sensors to precisely estimate unknown parameters.
The Heisenberg scaling, which scales as N^{-1} in terms of the number of particles or T^{-1} in terms of the evolution time, serves as a fundamental limit in quantum metrology. Better scalings, dubbed as "super-Heisenberg scaling," however, can also arise when the generator of the parameter involves many-body interactions or when it is time dependent. All these different scalings can actually be seen as manifestations of the Heisenberg uncertainty relations. While there is only one best scaling in the single-parameter quantum metrology, different scalings can coexist for the estimation of multiple parameters, which can be characterized by multiple Heisenberg uncertainty relations. We demonstrate the coexistence of two different scalings via the simultaneous estimation of the magnitude and frequency of a field where the best precisions, characterized by two Heisenberg uncertainty relations, scale as T^{-1} and T^{-2}, respectively (in terms of the standard deviation). We show that the simultaneous saturation of two Heisenberg uncertainty relations can be achieved by the optimal protocol, which prepares the optimal probe state, implements the optimal control, and performs the optimal measurement. The optimal protocol is experimentally implemented on an optical platform that demonstrates the saturation of the two Heisenberg uncertainty relations simultaneously, with up to five controls. As the first demonstration of simultaneously achieving two different Heisenberg scalings, our study deepens the understanding on the connection between the precision limit and the uncertainty relations, which has wide implications in practical applications of multiparameter quantum estimation.
Simultaneously estimating multiple parameters at the ultimate limit is a central challenge in quantum metrology, often hindered by inherent incompatibilities in optimal estimation strategies. At its most extreme, this incompatibility culminates in a fundamental impossibility when the quantum Fisher information matrix (QFIM) becomes singular, rendering joint estimation unattainable. This is the case for a canonical problem: estimating the amplitude and frequency of an AC magnetic field, where the generators are parallel to each other. Here, we introduce a quantum control protocol that resolves this singularity. Our control protocol strategically engineers the sensor's time evolution so the generators for the two parameters become orthogonal. It not only removes the singularity but also restores the optimal scaling of precision with interrogation time for both parameters simultaneously. We experimentally validate this protocol using a nitrogen-vacancy center in diamond at room temperature, demonstrating the concurrent achievement of the optimal scaling for both parameters under realistic conditions.
Achieving the ultimate precisions for multiple parameters simultaneously is an outstanding challenge in quantum physics, because the optimal measurements for incompatible parameters cannot be performed jointly due to the Heisenberg uncertainty principle. In this work, a criterion proposed for multiparameter estimation provides a possible way to beat this curse. According to this criterion, it is possible to mitigate the influence of incompatibility meanwhile improve the ultimate precisions by increasing the variances of the parameter generators simultaneously. For demonstration, a scheme involving high-order Hermite-Gaussian states as probes is proposed for estimating the spatial displacement and angular tilt of light at the same time, and precisions up to 1.45 nm and 4.08 nrad are achieved in experiment simultaneously. Consequently, our findings provide a deeper insight into the role of Heisenberg uncertainty principle in multiparameter estimation, and contribute in several ways to the applications of quantum metrology.