Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2607.26480

Feedback stabilization of multi-qubit Hamiltonian parameters enabled by single-shot measurement-based sequential Monte Carlo

Hyeongyu Jang, Jaemin Park, Younguk Song, Jinwoong Kim, Hanseo Sohn, Lucas E. A. Stehouwer, Davide Degli Esposti, Giordano Scappucci, Dohun Kim

quant-phSubmitted Jul 29, 2026• Announced Jul 30, 2026• 0 citations
arXivHTMLPDF

Abstract

Fast measurement, signal processing, and accurate estimation of Hamiltonian parameters are essential for feedback control in quantum-classical interface circuitry. However, existing frequentist and Bayesian inference methods typically require a large number of measurements to achieve the accuracy needed to mitigate qubit decoherence. Consequently, feedback control of semiconductor qubits has largely been limited to single-qubit frequency stabilization, whereas two-qubit parameter stabilization remains experimentally unexplored. Here, we demonstrate a real-time feedback framework based on sequential Monte Carlo estimation using one bit of data from a single-shot measurement. Using a four-qubit semiconductor quantum dot device, we rapidly estimate individual qubit frequencies, yielding an approximately twofold increase in coherence time compared with a conventional Bayesian strategy. Moreover, sequential two-qubit parameter estimation using two bits of data enables stabilization of qubit-qubit coupling, allowing both quasi-static frequency drift and exchange-interaction noise to be estimated and suppressed. By shortening the time required for precise parameter estimation, these results demonstrate the importance of the synergistic development of classical and quantum electronics for building robust and scalable quantum technologies in fluctuating environments.

Related papers

Real-time two-axis control of a spin qubit

Fabrizio Berritta, Torbjørn Rasmussen, Jan A. Krzywda +9 more

Optimal control of qubits requires the ability to adapt continuously to their ever-changing environment. We demonstrate a real-time control protocol for a two-electron singlet-triplet qubit with two fluctuating Hamiltonian parameters. Our approach leverages single-shot readout classification and dynamic waveform generation, allowing full Hamiltonian estimation to dynamically stabilize and optimize the qubit performance. Powered by a field-programmable gate array (FPGA), the quantum control electronics estimates the Overhauser field gradient between the two electrons in real time, enabling controlled Overhauser-driven spin rotations and thus bypassing the need for micromagnets or nuclear polarization protocols. It also estimates the exchange interaction between the two electrons and adjusts their detuning, resulting in extended coherence of Hadamard rotations when correcting for fluctuations of both qubit axes. Our study highlights the role of feedback in enhancing the performance and stability of quantum devices affected by quasistatic noise.

arXiv:2308.02012•Nature Communications•Feb 23, 2024•19 citations

Suppressing qubit dephasing using real-time Hamiltonian estimation

Michael Shulman, Shannon P. Harvey, John M. Nichol +4 more

Unwanted interaction between a quantum system and its fluctuating environment leads to decoherence and is the primary obstacle to establishing a scalable quantum information processing architecture. Strategies such as environmental and materials engineering, quantum error correction and dynamical decoupling can mitigate decoherence, but generally increase experimental complexity. Here we improve coherence in a qubit using real-time Hamiltonian parameter estimation. Using a rapidly converging Bayesian approach, we precisely measure the splitting in a singlet-triplet spin qubit faster than the surrounding nuclear bath fluctuates. We continuously adjust qubit control parameters based on this information, thereby improving the inhomogenously broadened coherence time (T2*) from tens of nanoseconds to >2 μs. Because the technique demonstrated here is compatible with arbitrary qubit operations, it is a natural complement to quantum error correction and can be used to improve the performance of a wide variety of qubits in both meteorological and quantum information processing applications.

arXiv:1405.0485•Nature Communications•Oct 8, 2014•199 citations

Fast-feedback protocols for calibration and drift control in quantum computers

Alicia B. Magann, Nathan E. Miller, Robin Blume-Kohout +2 more

We introduce two classes of lightweight, adaptive calibration protocols for quantum computers that leverage fast feedback. The first enables shot-by-shot updates to device parameters using measurement outcomes from simple, indefinite-outcome quantum circuits. This low-latency approach supports rapid tuning of one or more parameters in real time to mitigate drift. The second protocol updates parameters after collecting measurements from definite-outcome circuits (e.g.~syndrome extraction circuits for quantum error correction), balancing efficiency with classical control overheads. We use numerical simulations to demonstrate that both methods can calibrate 1- and 2-qubit gates rapidly and accurately even in the presence of decoherence, state preparation and measurement (SPAM) errors, and parameter drift. We propose and demonstrate effective adaptive strategies for tuning the hyperparameters of both protocols. Finally, we demonstrate the feasibility of real-time in-situ calibration of qubits performing quantum error correction, using only syndrome data, via numerical simulations of syndrome extraction in the [[5,1,3]] code.

quant-pharXiv:2512.07815•Dec 9, 2025•0 citations

Efficient Qubit Calibration by Binary-Search Hamiltonian Tracking

Berritta, Fabrizio, Benestad, Jacob, Pahl, Lukas +14 more

We present and experimentally implement a real-time protocol for calibrating the frequency of a resonantly driven qubit, achieving exponential scaling in calibration precision with the number of measurements, up to the limit imposed by decoherence. The real-time processing capabilities of a classical controller dynamically generate adaptive probing sequences for qubit-frequency estimation. Each probing evolution time and drive frequency are calculated to divide the prior probability distribution into two branches, following a locally optimal strategy that mimics a conventional binary search. The scheme does not require repeated measurements at the same setting, as it accounts for state preparation and measurement errors. Its use of a parametrized probability distribution favors numerical accuracy and computational speed. We show the efficacy of the algorithm by stabilizing a flux-tunable transmon qubit, leading to improved coherence and gate fidelity. As benchmarked by gate-set tomography, the field-programmable gate array (FPGA) powered control electronics partially mitigates non-Markovian noise, which is detrimental to quantum error correction. The mitigation is achieved by dynamically updating and feeding forward the qubit frequency. Our protocol highlights the importance of feedback in improving the calibration and stability of qubits subject to drift and can be readily applied to other qubit platforms.

•Aug 1, 2025•0 citations

Real-Time FPGA-Based Multi-Parameter Feedback Stabilization of a Silicon Double Quantum Dot

Johnathan Bryan, Tim J. Wilson, H. W. Jiang

Long term operation of semiconductor spin qubits requires active stabilization of quantum dot potentials against low-frequency charge noise. To address this, we demonstrate a gradient-descent feedback approach in a silicon double quantum dot device using high-bandwidth radio-frequency (rf) reflectometry readout and a field-programmable gate array (FPGA) for digital signal processing. This architecture enables continuous multi-parameter gradient calculation and quick gate voltage updates, significantly increasing the effective feedback bandwidth compared to previous methods relying on slow direct-current transport measurements. By operating with 8 steps per feedback cycle and an integration time of 25.6 $μ$s, this high-speed stabilization scheme maintains better than -6 dB of noise suppression up to 5 kHz, achieving an attenuation of $-7.4 \pm 0.2$ dB at the maximum measured frequency. This effectively suppresses low-frequency 1/f noise, maintaining device stability over longer time periods, and potentially enables real-time control in large-scale quantum dot arrays.

arXiv:2608.10325•Aug 10, 2026•0 citations

Towards autonomous time-calibration of large quantum-dot devices: Detection, real-time feedback, and noise spectroscopy

Anantha S. Rao, Barnaby van Straaten, Valentin John +8 more

The performance and scalability of semiconductor quantum-dot (QD) qubits are limited by electrostatic drift and charge noise that shift operating points and destabilize qubit parameters. As systems expand to large one- and two-dimensional arrays, manual recalibration becomes impractical, creating a need for autonomous stabilization frameworks. Here, we introduce a method that uses the full network of charge-transition lines in repeatedly acquired double-quantum-dot charge stability diagrams (CSDs) as a multidimensional probe of the local electrostatic environment. By accurately tracking the motion of selected transitions in time, we detect voltage drifts, identify abrupt charge reconfigurations, and apply compensating updates to maintain stable operating conditions. We demonstrate our approach on a 10-QD device, showing robust stabilization and real-time diagnostic access to dot-specific noise processes. The high acquisition rate of radio-frequency reflectometry CSD measurements also enables time-domain noise spectroscopy, allowing the extraction of noise power spectral densities, the identification of two-level fluctuators, and the analysis of spatial noise correlations across the array. From our analysis, we find that the background noise at 100~$μ$\si{\hertz} is dominated by drift with a power law of $1/f^2$, accompanied by a few dominant two-level fluctuators and an average linear correlation length of $(188 \pm 38)$~\si{\nano\meter} in the device. These capabilities form the basis of a scalable, autonomous calibration and characterization module for QD-based quantum processors, providing essential feedback for long-duration, high-fidelity qubit operations.

cond-mat.mes-hallCross-listedarXiv:2512.24894•Jan 1, 2026•0 citations
Fast measurement, signal processing, and accurate estimation of Hamiltonian parameters are essential for feedback control in quantum-classical interface circuitry. However, existing frequentist and Bayesian inference methods typically require a large number of measurements to achieve the accuracy needed to mitigate qubit decoherence. Consequently, feedback control of semiconductor qubits has largely been limited to single-qubit frequency stabilization, whereas two-qubit parameter stabilization remains experimentally unexplored. Here, we demonstrate a real-time feedback framework based on sequential Monte Carlo estimation using one bit of data from a single-shot measurement. Using a four-qubit semiconductor quantum dot device, we rapidly estimate individual qubit frequencies, yielding an approximately twofold increase in coherence time compared with a conventional Bayesian strategy. Moreover, sequential two-qubit parameter estimation using two bits of data enables stabilization of qubit-qubit coupling, allowing both quasi-static frequency drift and exchange-interaction noise to be estimated and suppressed. By shortening the time required for precise parameter estimation, these results demonstrate the importance of the synergistic development of classical and quantum electronics for building robust and scalable quantum technologies in fluctuating environments.
Optimal control of qubits requires the ability to adapt continuously to their ever-changing environment. We demonstrate a real-time control protocol for a two-electron singlet-triplet qubit with two fluctuating Hamiltonian parameters. Our approach leverages single-shot readout classification and dynamic waveform generation, allowing full Hamiltonian estimation to dynamically stabilize and optimize the qubit performance. Powered by a field-programmable gate array (FPGA), the quantum control electronics estimates the Overhauser field gradient between the two electrons in real time, enabling controlled Overhauser-driven spin rotations and thus bypassing the need for micromagnets or nuclear polarization protocols. It also estimates the exchange interaction between the two electrons and adjusts their detuning, resulting in extended coherence of Hadamard rotations when correcting for fluctuations of both qubit axes. Our study highlights the role of feedback in enhancing the performance and stability of quantum devices affected by quasistatic noise.
Unwanted interaction between a quantum system and its fluctuating environment leads to decoherence and is the primary obstacle to establishing a scalable quantum information processing architecture. Strategies such as environmental and materials engineering, quantum error correction and dynamical decoupling can mitigate decoherence, but generally increase experimental complexity. Here we improve coherence in a qubit using real-time Hamiltonian parameter estimation. Using a rapidly converging Bayesian approach, we precisely measure the splitting in a singlet-triplet spin qubit faster than the surrounding nuclear bath fluctuates. We continuously adjust qubit control parameters based on this information, thereby improving the inhomogenously broadened coherence time (T2*) from tens of nanoseconds to >2 μs. Because the technique demonstrated here is compatible with arbitrary qubit operations, it is a natural complement to quantum error correction and can be used to improve the performance of a wide variety of qubits in both meteorological and quantum information processing applications.
We introduce two classes of lightweight, adaptive calibration protocols for quantum computers that leverage fast feedback. The first enables shot-by-shot updates to device parameters using measurement outcomes from simple, indefinite-outcome quantum circuits. This low-latency approach supports rapid tuning of one or more parameters in real time to mitigate drift. The second protocol updates parameters after collecting measurements from definite-outcome circuits (e.g.~syndrome extraction circuits for quantum error correction), balancing efficiency with classical control overheads. We use numerical simulations to demonstrate that both methods can calibrate 1- and 2-qubit gates rapidly and accurately even in the presence of decoherence, state preparation and measurement (SPAM) errors, and parameter drift. We propose and demonstrate effective adaptive strategies for tuning the hyperparameters of both protocols. Finally, we demonstrate the feasibility of real-time in-situ calibration of qubits performing quantum error correction, using only syndrome data, via numerical simulations of syndrome extraction in the [[5,1,3]] code.
We present and experimentally implement a real-time protocol for calibrating the frequency of a resonantly driven qubit, achieving exponential scaling in calibration precision with the number of measurements, up to the limit imposed by decoherence. The real-time processing capabilities of a classical controller dynamically generate adaptive probing sequences for qubit-frequency estimation. Each probing evolution time and drive frequency are calculated to divide the prior probability distribution into two branches, following a locally optimal strategy that mimics a conventional binary search. The scheme does not require repeated measurements at the same setting, as it accounts for state preparation and measurement errors. Its use of a parametrized probability distribution favors numerical accuracy and computational speed. We show the efficacy of the algorithm by stabilizing a flux-tunable transmon qubit, leading to improved coherence and gate fidelity. As benchmarked by gate-set tomography, the field-programmable gate array (FPGA) powered control electronics partially mitigates non-Markovian noise, which is detrimental to quantum error correction. The mitigation is achieved by dynamically updating and feeding forward the qubit frequency. Our protocol highlights the importance of feedback in improving the calibration and stability of qubits subject to drift and can be readily applied to other qubit platforms.
Long term operation of semiconductor spin qubits requires active stabilization of quantum dot potentials against low-frequency charge noise. To address this, we demonstrate a gradient-descent feedback approach in a silicon double quantum dot device using high-bandwidth radio-frequency (rf) reflectometry readout and a field-programmable gate array (FPGA) for digital signal processing. This architecture enables continuous multi-parameter gradient calculation and quick gate voltage updates, significantly increasing the effective feedback bandwidth compared to previous methods relying on slow direct-current transport measurements. By operating with 8 steps per feedback cycle and an integration time of 25.6 μμμs, this high-speed stabilization scheme maintains better than -6 dB of noise suppression up to 5 kHz, achieving an attenuation of −7.4±0.2-7.4 \pm 0.2−7.4±0.2 dB at the maximum measured frequency. This effectively suppresses low-frequency 1/f noise, maintaining device stability over longer time periods, and potentially enables real-time control in large-scale quantum dot arrays.
The performance and scalability of semiconductor quantum-dot (QD) qubits are limited by electrostatic drift and charge noise that shift operating points and destabilize qubit parameters. As systems expand to large one- and two-dimensional arrays, manual recalibration becomes impractical, creating a need for autonomous stabilization frameworks. Here, we introduce a method that uses the full network of charge-transition lines in repeatedly acquired double-quantum-dot charge stability diagrams (CSDs) as a multidimensional probe of the local electrostatic environment. By accurately tracking the motion of selected transitions in time, we detect voltage drifts, identify abrupt charge reconfigurations, and apply compensating updates to maintain stable operating conditions. We demonstrate our approach on a 10-QD device, showing robust stabilization and real-time diagnostic access to dot-specific noise processes. The high acquisition rate of radio-frequency reflectometry CSD measurements also enables time-domain noise spectroscopy, allowing the extraction of noise power spectral densities, the identification of two-level fluctuators, and the analysis of spatial noise correlations across the array. From our analysis, we find that the background noise at 100~μμμ\si{\hertz} is dominated by drift with a power law of 1/f21/f^21/f2, accompanied by a few dominant two-level fluctuators and an average linear correlation length of (188±38)(188 \pm 38)(188±38)~\si{\nano\meter} in the device. These capabilities form the basis of a scalable, autonomous calibration and characterization module for QD-based quantum processors, providing essential feedback for long-duration, high-fidelity qubit operations.