Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2607.17964

Scanless quantum Fourier-transform mid-infrared spectroscopy for rapid high-sensitivity hyperspectral mapping

Paul Gattinger, Bettina Heise, Andreas W. Schell, Kristina Duswald, Markus Brandstetter, Ivan Zorin

physics.opticsphysics.ins-detquant-phSubmitted Jul 20, 2026• Announced Jul 21, 2026• 0 citations
arXivHTMLPDF

Abstract

Fourier-transform infrared (FTIR) spectroscopy is a well-established technique for qualitative and quantitative chemical analysis. Classical FTIR systems rely, however, on direct mid-infrared (mid-IR) scan-based time-domain measurements of coherence functions; thus, the signal-to-noise ratio and measurement speed are constrained by design. In this paper, we demonstrate a scanless quantum FTIR (sQFTIR) technique that exploits principles of metrology with entangled photons to circumvent the limitations inherent to classical FTIR systems. The approach exploits the interferometric nature of the sensing paradigm and relies on frequency-domain measurements performed with a static, low-gain nonlinear interferometer. A robust reconstruction algorithm is used to retrieve time-domain signals and reconstruct respective mid-infrared (mid-IR) spectra (3000$~$cm$^{-1}$ to 2380$~$cm$^{-1}$) from near-IR measurements (approx. 780$~$nm to 820$~$nm). The suggested sQFTIR protocol eliminates the need for optical delay scanning and leverages inherent mapping between the related domains. In the theoretical section, we evaluate the intrinsic signal-to-noise advantage of the proposed method over conventional scan-based time-domain measurements; a difference of 26.8 dB (factor of 21.8) is demonstrated. Building on the enhanced sensitivity of the scheme, we demonstrate rapid sQFTIR-based hyperspectral imaging with a spatial resolution of 12.3$~μ$m and a spectral resolution down to 8$~$cm$^{-1}$. Hyperspectral mapping of human colon tissue, microplastics, and multilayer polymer samples composed of polypropylene and ethylene vinyl alcohol yield high-quality single-pixel spectra with acquisition times down to 10$~$ms.

Comments
16 pages, 7 figures

Related papers

Scanless quantum Fourier-transform mid-infrared spectroscopy for solids and surface analysis

Paul Gattinger, Michela Conti, Franziska Dietz +4 more

Quantum infrared (IR) spectroscopy is a novel technique based on nonlinear interferometry and quantum sensing with undetected photons. In this approach, spectrally far-separated correlated photon pairs are used for detection and probing, respectively. Hence, the probing wavelength domain (mid-IR) is substantially different from the detection spectral range (near-IR), which enables shot-noise-limited and cost-effective sensing schemes attractive for applied metrology. In this paper, we implement and employ a custom-built scanless quantum Fourier-transform mid-IR (sQFTIR) microspectrometer for chemical characterization and analysis of solids and interfaces. The sQFTIR system employs spectral-domain acquisition, without the need to scan the optical delay. This results in enhanced sensitivity and short measurement times and therefore enables rapid spectral acquisitions in 100~ms spanning a spectral band from 3000 cm$^{-1}$ - 2400 cm$^{-1}$. The capabilities of our approach are demonstrated for hyperspectral mid-IR imaging of dried pharmaceuticals (insulin on a gold surface) and investigation of a security feature on a banknote. Furthermore, we demonstrate hyperspectral imaging and spectroscopy through a turbid ceramic medium.

physics.opticsCross-listedarXiv:2609.37281•Sep 30, 2026•0 citations

Mid-IR hyperspectral imaging with undetected photons

Marlon Placke, Chiara Lindner, Felix Mann +5 more

Sensing with undetected photons has become a vibrant, application-driven research domain with a special focus on the mid-infrared (mid-IR) wavelength region. Since the mid-IR contains spectral bands with highly specific and strong molecular absorbance signatures, often referred to as fingerprints, a multitude of different samples and their compositions can be detected and quantified spectroscopically. Enhancing this spectroscopic method with imaging capabilities leads to a powerful technique for environmental monitoring and biomedical applications that enables automated diagnostics while omitting time-consuming and non-reversible labeling steps. To evade the shortcomings of state-of-the-art instruments for mid-IR hyperspectral microscopy—namely cost, complexity, power consumption, and performance, which stem from technological challenges in mid-IR detection and light sources—we construct a proof-of-concept nonlinear interferometer in a wide-field imaging arrangement. This nominally narrowband imaging technique is then expanded to acquire broadband spectral information through capturing images for varying interferometer displacement and applying a pixelwise Fourier-transform of the resulting interferograms, yielding high-resolution infrared spectra for each camera pixel. For the broadband range of 2300−3100cm −1 , covering the important CH-stretch band, we perform hyperspectral imaging that simultaneously resolves 3500 spatial modes, each with a spectral resolution of 10cm −1 , leveraging in total around 10 5 spatio-spectrally entangled photon modes. Our image acquisition uses a commercial sCMOS camera, while a medium-power and compact continuous-wave pump laser is the only necessary light source. For a moderate speed of 360 voxel/s, we obtain a predominantly shot-noise-influenced signal-to-noise ratio (SNR) of 50. We further demonstrate the practicality of our novel hyperspectral imaging technique for microplastics detection and bio-imaging tasks and outline engineering solutions to increase its speed by several orders of magnitude. This shows that our quantum imaging technique is highly promising for applications requiring compact, cost-effective label-free analyses.

Optica•Jan 9, 2026•5 citations

Quantum Fourier Transform Infrared Spectroscopy: Evaluation, Benchmarking, and Prospects

Paul Gattinger, Andreas Wolfgang Schell, Sven Ramelow +2 more

Sensing with undetected photons has enabled new, unconventional approaches to Fourier transform infrared spectroscopy (FT-IR). Leveraging properties of non-degenerate entangled photon pairs, mid-infrared (mid-IR) information can be accessed in the near-infrared (near-IR) spectral domain to perform mid-IR spectroscopy with silicon-based detection schemes. Here, we address practical aspects of vibrational spectroscopy with undetected photons using a quantum FT-IR (QFT-IR) implementation. The system operates in the spectral range from around 3000 cm −1 to 2380 cm −1 (detection at around 12 500 cm −1 ) and possesses only 68 pW of mid-IR probing power for spectroscopic measurements with a power-dependence of the signal-to-noise ratio of 1.5 × 10 5 mW −1/2 . We evaluate the system’s short- and long-term stability and experimentally compare it to a commercial FT-IR instrument using Allan–Werle plots to benchmark our QFT-IR implementation’s overall performance and stability. In addition, comparative qualitative spectroscopic measurements of polymer thin films are performed using the QFT-IR spectrometer and a commercial FT-IR with identical resolution and integration times. Our results show under which conditions QFT-IR can practically be competitive or potentially outperform conventional FT-IR technology.

arXiv:2503.13233•Applied Spectroscopy•May 21, 2025•7 citations

Mid-IR hyperspectral imaging with undetected photons

Marlon Placke, Chiara Lindner, Felix Mann +4 more

By combining a nonlinear interferometer in imaging-mode with Fourier-transform spectroscopy, we realize broadband mid-infrared hyperspectral acquisition with undetected photons. We demonstrate the novel imaging technique on polymer and bio-tissue samples using only near-infrared silicon-based cameras.

Quantum 2.0 Conference and Exhibition•Jan 1, 2024•0 citations

High resolution Fourier-transform mid-infrared spectroscopy using nonlinear interferometers

Jachin Kunz, Chiara Lindner, Simon J. Herr +3 more

Nonlinear interferometers based on correlated photon pairs allow mid-infrared spectroscopy by measuring only near-infrared photons with a silicon-based detector, which offers higher detectivities than mid-infrared detectors. Here, we use the nonlinear interferometer not only to determine the transmission of a sample but also for spectral analysis - analogue to classical Fourier transform infrared (FTIR) spectrometers. The Quantum FTIR analyzes the absorption of gas mixtures with high spectral resolution over a broad mid-infrared wavelength range. Improved emission rates of the photon pair source yield sensitivities similar to a classical FTIR despite an extremely low light exposure on the sample.

Optical and Quantum Sensing and Precision Metrology II•Mar 8, 2023•1 citation

Mid-infrared single-photon upconversion spectroscopy enabled by nonlocal wavelength-to-time mapping

Yujie Cai, Yu Chen, Konstantin E. Dorfman +4 more

Ultrasensitive spectroscopy is an essential component in mid-infrared (MIR) technology. However, the drawbacks of MIR detectors pose challenges to robust MIR spectroscopy at the single-photon level. We propose an MIR single-photon frequency upconversion spectroscopy nonlocally mapping the MIR information to the time domain. Broadband MIR photons from spontaneous parametric downconversion are frequency-upconverted to the near-infrared band with quantum correlation preservation. Via the group delay of fiber, the MIR spectral information within a 1.18-micrometer bandwidth of 2.76 to 3.94 micrometers is then successfully projected to arrival times of correlated photon pairs. Under the conditions of 6.4 × 10 6 photons per second illumination, the transmission spectra of polymers with single-photon sensitivity are demonstrated using single-pixel detectors. The developed approach circumvents scanning and frequency selection instability, which stands out for its inherent compatibility for evolving environments and scalability for various wavelengths. Because of its high sensitivity and robustness, characterization of biochemical samples and weak measurement of quantum systems are possible to foresee.

Science Advances•Apr 19, 2024•37 citations
Fourier-transform infrared (FTIR) spectroscopy is a well-established technique for qualitative and quantitative chemical analysis. Classical FTIR systems rely, however, on direct mid-infrared (mid-IR) scan-based time-domain measurements of coherence functions; thus, the signal-to-noise ratio and measurement speed are constrained by design. In this paper, we demonstrate a scanless quantum FTIR (sQFTIR) technique that exploits principles of metrology with entangled photons to circumvent the limitations inherent to classical FTIR systems. The approach exploits the interferometric nature of the sensing paradigm and relies on frequency-domain measurements performed with a static, low-gain nonlinear interferometer. A robust reconstruction algorithm is used to retrieve time-domain signals and reconstruct respective mid-infrared (mid-IR) spectra (3000 ~ cm−1^{-1}−1 to 2380 ~ cm−1^{-1}−1) from near-IR measurements (approx. 780 ~ nm to 820 ~ nm). The suggested sQFTIR protocol eliminates the need for optical delay scanning and leverages inherent mapping between the related domains. In the theoretical section, we evaluate the intrinsic signal-to-noise advantage of the proposed method over conventional scan-based time-domain measurements; a difference of 26.8 dB (factor of 21.8) is demonstrated. Building on the enhanced sensitivity of the scheme, we demonstrate rapid sQFTIR-based hyperspectral imaging with a spatial resolution of 12.3 μ~μ μm and a spectral resolution down to 8 ~ cm−1^{-1}−1. Hyperspectral mapping of human colon tissue, microplastics, and multilayer polymer samples composed of polypropylene and ethylene vinyl alcohol yield high-quality single-pixel spectra with acquisition times down to 10 ~ ms.
Quantum infrared (IR) spectroscopy is a novel technique based on nonlinear interferometry and quantum sensing with undetected photons. In this approach, spectrally far-separated correlated photon pairs are used for detection and probing, respectively. Hence, the probing wavelength domain (mid-IR) is substantially different from the detection spectral range (near-IR), which enables shot-noise-limited and cost-effective sensing schemes attractive for applied metrology. In this paper, we implement and employ a custom-built scanless quantum Fourier-transform mid-IR (sQFTIR) microspectrometer for chemical characterization and analysis of solids and interfaces. The sQFTIR system employs spectral-domain acquisition, without the need to scan the optical delay. This results in enhanced sensitivity and short measurement times and therefore enables rapid spectral acquisitions in 100~ms spanning a spectral band from 3000 cm−1^{-1}−1 - 2400 cm−1^{-1}−1. The capabilities of our approach are demonstrated for hyperspectral mid-IR imaging of dried pharmaceuticals (insulin on a gold surface) and investigation of a security feature on a banknote. Furthermore, we demonstrate hyperspectral imaging and spectroscopy through a turbid ceramic medium.
Sensing with undetected photons has become a vibrant, application-driven research domain with a special focus on the mid-infrared (mid-IR) wavelength region. Since the mid-IR contains spectral bands with highly specific and strong molecular absorbance signatures, often referred to as fingerprints, a multitude of different samples and their compositions can be detected and quantified spectroscopically. Enhancing this spectroscopic method with imaging capabilities leads to a powerful technique for environmental monitoring and biomedical applications that enables automated diagnostics while omitting time-consuming and non-reversible labeling steps. To evade the shortcomings of state-of-the-art instruments for mid-IR hyperspectral microscopy—namely cost, complexity, power consumption, and performance, which stem from technological challenges in mid-IR detection and light sources—we construct a proof-of-concept nonlinear interferometer in a wide-field imaging arrangement. This nominally narrowband imaging technique is then expanded to acquire broadband spectral information through capturing images for varying interferometer displacement and applying a pixelwise Fourier-transform of the resulting interferograms, yielding high-resolution infrared spectra for each camera pixel. For the broadband range of 2300−3100cm −1 , covering the important CH-stretch band, we perform hyperspectral imaging that simultaneously resolves 3500 spatial modes, each with a spectral resolution of 10cm −1 , leveraging in total around 10 5 spatio-spectrally entangled photon modes. Our image acquisition uses a commercial sCMOS camera, while a medium-power and compact continuous-wave pump laser is the only necessary light source. For a moderate speed of 360 voxel/s, we obtain a predominantly shot-noise-influenced signal-to-noise ratio (SNR) of 50. We further demonstrate the practicality of our novel hyperspectral imaging technique for microplastics detection and bio-imaging tasks and outline engineering solutions to increase its speed by several orders of magnitude. This shows that our quantum imaging technique is highly promising for applications requiring compact, cost-effective label-free analyses.
Sensing with undetected photons has enabled new, unconventional approaches to Fourier transform infrared spectroscopy (FT-IR). Leveraging properties of non-degenerate entangled photon pairs, mid-infrared (mid-IR) information can be accessed in the near-infrared (near-IR) spectral domain to perform mid-IR spectroscopy with silicon-based detection schemes. Here, we address practical aspects of vibrational spectroscopy with undetected photons using a quantum FT-IR (QFT-IR) implementation. The system operates in the spectral range from around 3000 cm −1 to 2380 cm −1 (detection at around 12 500 cm −1 ) and possesses only 68 pW of mid-IR probing power for spectroscopic measurements with a power-dependence of the signal-to-noise ratio of 1.5 × 10 5 mW −1/2 . We evaluate the system’s short- and long-term stability and experimentally compare it to a commercial FT-IR instrument using Allan–Werle plots to benchmark our QFT-IR implementation’s overall performance and stability. In addition, comparative qualitative spectroscopic measurements of polymer thin films are performed using the QFT-IR spectrometer and a commercial FT-IR with identical resolution and integration times. Our results show under which conditions QFT-IR can practically be competitive or potentially outperform conventional FT-IR technology.
Nonlinear interferometers based on correlated photon pairs allow mid-infrared spectroscopy by measuring only near-infrared photons with a silicon-based detector, which offers higher detectivities than mid-infrared detectors. Here, we use the nonlinear interferometer not only to determine the transmission of a sample but also for spectral analysis - analogue to classical Fourier transform infrared (FTIR) spectrometers. The Quantum FTIR analyzes the absorption of gas mixtures with high spectral resolution over a broad mid-infrared wavelength range. Improved emission rates of the photon pair source yield sensitivities similar to a classical FTIR despite an extremely low light exposure on the sample.
Ultrasensitive spectroscopy is an essential component in mid-infrared (MIR) technology. However, the drawbacks of MIR detectors pose challenges to robust MIR spectroscopy at the single-photon level. We propose an MIR single-photon frequency upconversion spectroscopy nonlocally mapping the MIR information to the time domain. Broadband MIR photons from spontaneous parametric downconversion are frequency-upconverted to the near-infrared band with quantum correlation preservation. Via the group delay of fiber, the MIR spectral information within a 1.18-micrometer bandwidth of 2.76 to 3.94 micrometers is then successfully projected to arrival times of correlated photon pairs. Under the conditions of 6.4 × 10 6 photons per second illumination, the transmission spectra of polymers with single-photon sensitivity are demonstrated using single-pixel detectors. The developed approach circumvents scanning and frequency selection instability, which stands out for its inherent compatibility for evolving environments and scalability for various wavelengths. Because of its high sensitivity and robustness, characterization of biochemical samples and weak measurement of quantum systems are possible to foresee.