Astronomical observations allow us to better our understanding of the universe. As we observe smaller and more distance features, we run into the diffraction limit of our observation system. This limit is a function of the wavelength observed and the size of the primary aperture used. We can synthesize a larger primary aperture by implementing interferometry. Long baseline optical interferometry would lead to significant improvements in astronomical imaging resolution. Building optical interferometers with free space baselines becomes significantly more difficult as the baseline increases. A promising alternative is to use optical fiber to connect telescopes. Fiber-based interferometers are much more susceptible to phase noise than their free-space counterparts due to inhomogeneities in the fiber medium. This leads to significant degradation of interferometric signals used for astronomical measurements. We implement phase stabilization techniques used in quantum communications to stabilize an optical interferometer with a 170km pseudo-baseline. We use a quantum optimal measurement technique with this interferometer to resolve the extent of a source four times smaller than the diffraction limit of the system within 1.5% error. These results bring the potential for a full-scale on-sky long baseline interferometer significantly closer. A 350km baseline optical interferometer at 1550nm would allow us to resolve sub microarcsecond features in the universe.
Astronomical observations allow us to better our understanding of the universe. As we observe smaller and more distance features, we run into the diffraction limit of our observation system. This limit is a function of the wavelength observed and the size of the primary aperture used. We can synthesize a larger primary aperture by implementing interferometry. Long baseline optical interferometry would lead to significant improvements in astronomical imaging resolution. Building optical interferometers with free space baselines becomes significantly more difficult as the baseline increases. A promising alternative is to use optical fiber to connect telescopes. Fiber-based interferometers are much more susceptible to phase noise than their free-space counterparts due to inhomogeneities in the fiber medium. This leads to significant degradation of interferometric signals used for astronomical measurements. We implement phase stabilization techniques used in quantum communications to stabilize an optical interferometer with a 170km pseudo-baseline. We use a quantum optimal measurement technique with this interferometer to resolve the extent of a source four times smaller than the diffraction limit of the system within 1.5% error. These results bring the potential for a full-scale on-sky long baseline interferometer significantly closer. A 350km baseline optical interferometer at 1550nm would allow us to resolve sub microarcsecond features in the universe.
The maximum baseline, and therefore resolution, of optical astronomical interferometers is limited by attenuation and phase noise within the optical path between the apertures and beam combiner, as well as the practical challenges of constructing optical delay lines more than a few hundred meters in length. We implement off-band phase stabilization on two fiber optic links of 85 km, creating a total baseline of 170 km. We show that the system is able to effectively phase stabilize signals from an incoherent pseudo-thermal source with a bandwidth of 11.2 nm. We are able to reduce the phase noise by 4-5 orders of magnitude between 1 and 100 Hz, such that we could resolve an applied phase difference of 0.16 cycles per second with continuous measurement. We show that, with phase stabilization active, the interferometer is able to recover both first-order and second-order photon correlations. These results demonstrate the feasibility of this technique for long-baseline optical and quantum astronomical interferometers. The present results are limited by chromatic dispersion within the fiber, which can be mitigated using dispersion-compensating modules.
Recent advances in quantum information theory have led to the development of quantum imaging methods that would allow optical interferometers to achieve resolutions surpassing the conventional diffraction limit. The use of quantum technologies also has the potential to create optical interferometer telescopes with baselines of hundreds of kilometers, achieving unprecedented imaging resolution. We present results of laboratory experiments advancing quantum interferometer techniques for astronomy. We demonstrate quantum-optimal imaging of an artificial star-like source using a phase-stabilized 170 km-span optical interferometer, pointing the way to astronomical interferometers with resolution orders of magnitude better than any current telescope, with outstanding applications for studying exoplanets, the formation of star systems, and tests of General Relativity near the event horizon of a black hole.
Optical Very Long Baseline Interferometry (VLBI) offers the potential for unprecedented angular resolution in both astronomical imaging and geodesy measurements. Classical approaches face limitations due to photon loss, background noise, and their need for dynamical delay lines over large distances. This review surveys recent developments in quantum-enabled optical VLBI that address these challenges using entanglement-assisted protocols, quantum memory storage, and nonlocal measurement techniques. While its application to astronomy is well known, we also examine how these techniques may be extended to geodesy–specifically, the monitoring of Earth’s rotation. Particular attention is given to quantum-enhanced telescope architectures, including repeater-based long-baseline interferometry and quantum error-corrected encoding schemes, which offer a pathway toward high-fidelity optical VLBI. To aid the discussion, we also compare specifications for key enabling technologies to current state-of-the-art experimental components. By integrating quantum technologies, future interferometric networks may achieve diffraction-limited imaging at optical and near-infrared wavelengths, surpassing the constraints of classical techniques and enabling new precision tests of astrophysical and fundamental physics phenomena.
Long baseline diffraction-limited optical aperture synthesis technology by interferometry plays an important role in scientific study and practical application. In contrast to amplitude (phase) interferometry, intensity interferometry -- which exploits the quantum nature of light to measure the photon bunching effect in thermal light -- is robust against atmospheric turbulence and optical defects. However, a thermal light source typically has a significant divergence angle and a low average photon number per mode, forestalling the applicability over long ranges. Here, we propose and demonstrate active intensity interferometry for super-resolution imaging over the kilometer range. Our scheme exploits phase-independent multiple laser emitters to produce the thermal illumination and uses an elaborate computational algorithm to reconstruct the image. In outdoor environments, we image two-dimension millimeter-level targets over 1.36 kilometers at a resolution of 14 times the diffraction limit of a single telescope. High-resolution optical imaging and sensing are anticipated by applying long-baseline active intensity interferometry in general branches of physics and metrology.
Observations using interferometers provide sensitivity to features of images on angular scales much smaller than any single telescope, on the order of Δθ ∼ λ/b where b is the interferometric baseline. Present-day optical interferometers are essentially classical, interfering single photons with themselves. However, there is a new wave of interest in interferometry using multiple photons, whose mechanisms are inherently quantum mechanical, which offer the prospects of increased baselines and finer resolutions among other advantages. We will discuss recent ideas and results for quantum-assisted interferometry using the resource of entangled pairs, and specifically a two-photon amplitude technique aimed at improved precision in astrometry.
Classical optical interferometry requires maintaining live, phase-stable links between telescope stations. This requirement greatly adds to the cost of extending to long baseline separations and limits on baselines will in turn limit the achievable angular resolution. Here we describe a novel type of two-photon interferometer for astrometry, which uses photons from two separate sky sources and does not require an optical link between stations. Such techniques may make large increases in interferometric baselines practical, even by orders of magnitude, with a corresponding improvement in astrometric precision benefiting numerous fields in astrophysics. We tested a benchtop analogue version of the two-source interferometer and unambiguously observe correlated behavior in detections of photon pairs from two thermal light sources, in agreement with theoretical predictions. This work opens new possibilities in future astronomical measurements.