Distributed quantum computation needs to move logical qubits across lossy optical links, yet this transmission layer is usually designed separately from the computation it serves. We treat the two together by recognizing that a measurement-based quantum repeater is a two-dimensional code foliated along the transmission axis, so that the dominant channel loss is concentrated on the transmitted sector while the locally measured qubits are largely spared. Matching a code's distance to this structural asymmetry, we show that a rectangular Bacon-Shor subsystem code transmits a logical qubit markedly more efficiently than transmission-unaware encodings. Over continental distances, its cost-optimal repeater density is about an order of magnitude lower than that of a recent $[[48,6,8]]$ benchmark at comparable transmission rate, and roughly half that of a symmetric code of equal size. Moreover, we extend the framework to a central-to-client round trip in which a code-level, distance-preserving code switch joins the transmission legs to the client's computation, and joint decoding of the heterogeneous syndrome record at the central node lets distributed quantum computation proceed with a decoder-free client.
Distributed quantum computation needs to move logical qubits across lossy optical links, yet this transmission layer is usually designed separately from the computation it serves. We treat the two together by recognizing that a measurement-based quantum repeater is a two-dimensional code foliated along the transmission axis, so that the dominant channel loss is concentrated on the transmitted sector while the locally measured qubits are largely spared. Matching a code's distance to this structural asymmetry, we show that a rectangular Bacon-Shor subsystem code transmits a logical qubit markedly more efficiently than transmission-unaware encodings. Over continental distances, its cost-optimal repeater density is about an order of magnitude lower than that of a recent [[48,6,8]] benchmark at comparable transmission rate, and roughly half that of a symmetric code of equal size. Moreover, we extend the framework to a central-to-client round trip in which a code-level, distance-preserving code switch joins the transmission legs to the client's computation, and joint decoding of the heterogeneous syndrome record at the central node lets distributed quantum computation proceed with a decoder-free client.
Quantum repeaters constitute a promising platform for enabling long-distance quantum communication and may ultimately serve as the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. An efficient approach to encoding qubits within an error correcting code is provided by bosonic codes, in which even a single oscillator mode can function as a sufficiently large physical system. In this work, we initially investigate the bosonic Gottesman Kitaev Preskill (GKP) code as a promising platform for loss correcting quantum repeaters, compatible with room temperature implementation, and analyse how loss and other noise sources propagate through the circuit using Heisenberg evolution. We analyse three quantum repeater protocols in which transmission loss is suppressed at the cost of logical errors, identifying a relay-like teleamplifier as the optimal scheme. This enables long distance quantum communication via densely packed nodes without higher-level encoding, and we evaluate the resulting secure key rates exploiting analog syndrome information. Furthermore, we propose a concatenated Bell-state measurement (CBSM) scheme with a modified parity encoding based on GKP qubits, CV measurement with teleamplifier and a clipping method that corrects transmission loss without introducing logical errors. This significantly enhances the possible secure key distance. We find that GKP based repeaters can achieve performance comparable to approaches relying on photonic qubits, while requiring orders of magnitude fewer qubits. Our parity encoded GKP repeater protocol achieves a substantially higher secret key rate than existing GKP based repeater schemes while maintaining a comparable resource overhead.
Quantum repeaters are a promising platform for realizing long-distance quantum communication and thus could form the backbone of a secure quantum internet, a scalable quantum network, or a distributed quantum computer. Repeater protocols that encode information in single- or multiphoton states are limited by transmission losses and the cost of implementing entangling gates or Bell measurements. In this work, we consider implementing a quantum repeater protocol using Gottesman-Kitaev-Preskill (GKP) qubits. These qubits are natural elements for quantum repeater protocols, because they allow for deterministic Gaussian entangling operations and Bell measurements, which can be implemented at room temperature. The GKP encoding is also capable of correcting small displacement errors. At the cost of additional Gaussian noise, photon loss can be converted into a random displacement error channel by applying a phase-insensitive amplifier. Here we show that a similar conversion can be achieved in two-way repeater protocols by using phase-sensitive amplification applied in the postprocessing of the measurement data, resulting in less overall Gaussian noise per (sufficiently short) repeater segment. We also investigate concatenating the GKP code with higher-level qubit codes while leveraging analog syndrome data, postselection, and path-selection techniques to boost the rate of communication. We compute the secure key rates and find that GKP repeaters can achieve a comparative performance relative to methods based on photonic qubits while using orders-of-magnitude fewer qubits.
Quantum relays are central to both quantum communication and distributed quantum computing, enabling long-distance transmission and modular architectures. Unlike classical repeaters, quantum repeaters preserve coherence without amplifying quantum information, relying on entanglement swapping and quantum error correction to overcome loss and decoherence. In this work, we investigate the transmission of quantum information via quantum relay channels. Our three-terminal relay model captures the trade-off between repeater-assisted and repeaterless communication strategies. Specifically, we propose a partial decode-forward strategy, in which quantum ``message system" consists of two components. The first component is decoded by the relay and then sent to the destination receiver, whereas the second component is decoded by the destination receiver without the relay's help. We analyze both entanglement-assisted and unassisted scenarios. As a special case, the full decode-forward strategy is recovered, with the relay decoding, re-encoding, and forwarding the entire message. Our framework allows for different entanglement topologies between the transmitter, the relay and the destination receiver, recovering known results on entanglement-assisted and unassisted communication. Furthermore, we discuss the interpretation of coding with quantum side information. These findings provide a foundation for designing secure, efficient, and reliable quantum networks and for realizing practical quantum repeaters and long-range quantum key distribution.
We present a quantum repeater protocol for distributing entanglement over long distances, where a dedicated communication stage enables trial rates not limited by the travel time between repeater nodes. To accomplish this, each node contains several qubits that can couple to one single-photon emitter. Photons from the emitters in neighboring nodes generate heralded entanglement between qubits in these nodes. The protocol leaves the emitters disentangled from the rest of the system immediately after emitting the photons, thus allowing them to be reused to entangle other qubits without waiting for the repeater link round-trip time. This time multiplexing increases the protocol trial rate by up to an order of magnitude. The protocol is then combined with conventional deterministic entanglement swapping and heralded entanglement purification to extend the entanglement distance and reduce the entanglement error, respectively. We perform a complete protocol analysis by considering all relevant error sources, such as initialization, two-qubit gate, and qubit measurement errors, as well as the exponential decoherence of the qubits with time. The latter is particularly important since we analyze the protocol performance for a broad range of experimental parameters and obtain secret key rates ranging from 1 to 1000 Hz at a distance of 1000 km. Our results suggest that it is important to reach a qubit memory coherence time of around 1 s, and two-qubit gate and measurement errors on the order of 10 − 3 to obtain reasonable secret key rates over distances longer than achievable with direct transmission. While this work focuses on optimizing secret key rates, the protocol can also be used for Einstein-Podolsky-Rosen pair generation and is thus also relevant for, e.g., distributed quantum computing.
We present a hybrid quantum repeater protocol for the long-distance distribution of atomic entangled states beyond qubits. In our scheme, imperfect noisy entangled pairs of two qudits, i.e., two discrete-variable d-level systems, each of, in principle, arbitrary dimension d, are initially shared between the intermediate stations of the channel. This is achieved via local, sufficiently strong light-matter interactions, involving optical coherent states and their transmission after these interactions, and optical measurements on the transmitted field modes, especially efficient continuous-variable homodyne detections (``hybrid'' here refers to the simultaneous exploitation of discrete- and continuous-variable degrees of freedom for the local processing and storage of entangled states as well as their nonlocal distribution, respectively) and unambiguous state discrimination. For qutrits we quantify the light-matter entanglement that can be effectively shared through an elementary lossy channel, and for a repeater spacing of up to 10 km we show that the realistic (lossy) qutrit entanglement is even larger than any ideal (loss-free) qubit entanglement. After including qudit entanglement purification and swapping procedures, we calculate the long-distance entangled-pair distribution rates and the final entangled-state fidelities for total communication distances of up to 1280 km. For example, employing unambiguous state discrimination, with three rounds of purification, entangled qudit pairs of near-unit fidelity can be distributed over 1280 km at an ideal maximal rate (assuming perfect gate operations) on the order of 100 Hz.
Abstract Quantum repeater is the key technology enabler for long-distance quantum communication. To date, most of the existing quantum repeater protocols are designed based on specific quantum codes or graph states. In this paper, we propose a general framework for all-photonic one-way quantum repeaters based on the measurement-based error correction, which can be adapted to any Calderbank–Shor–Steane code including the recently discovered quantum low-density parity check (QLDPC) codes. We present a decoding scheme, where the error correction process is carried out at the destination based on the accumulated data from the measurements made across the network. This procedure not only outperforms the conventional protocols with independent repeaters but also simplifies the local quantum operations at repeaters. As an example, we numerically show that the [[48, 6, 8]] generalized bicycle code (as a small but efficient QLDPC code) has an equally good performance while reducing the resources by at least an order of magnitude.