Quantum simulation of open quantum systems in the noisy intermediate-scale quantum (NISQ) era is hindered by the non-unitary nature of dissipative dynamics and the limited quantum resources available on near-term quantum processors. In this work, we propose a resource-efficient algorithm for simulating Lindbladian dynamics on NISQ devices. For open quantum systems with Pauli dissipations, we first derive a compact and stable mixed-unitary adjoint channel that approximates the target dissipative dynamics and enables ancilla-free implementation through trajectory sampling. To further reduce the circuit depth required for implementing the sampled trajectories, we introduce an adaptive variational quantum trajectory compression framework. In this framework, a depth-adaptive parameterized quantum circuit is trained to approximate repeated Trotterized Hamiltonian simulation operators, which are then used to replace repeated unitary segments appearing in the sampled trajectories. Importantly, the training procedure can also be performed without auxiliary qubits. Numerical simulations of the dissipative quantum $XY$ model demonstrate the accuracy and resource efficiency of the proposed algorithm. Our results provide a practical route toward ancilla-free and depth-reduced simulation of open quantum systems on near-term quantum hardware.
Quantum simulation of open quantum systems in the noisy intermediate-scale quantum (NISQ) era is hindered by the non-unitary nature of dissipative dynamics and the limited quantum resources available on near-term quantum processors. In this work, we propose a resource-efficient algorithm for simulating Lindbladian dynamics on NISQ devices. For open quantum systems with Pauli dissipations, we first derive a compact and stable mixed-unitary adjoint channel that approximates the target dissipative dynamics and enables ancilla-free implementation through trajectory sampling. To further reduce the circuit depth required for implementing the sampled trajectories, we introduce an adaptive variational quantum trajectory compression framework. In this framework, a depth-adaptive parameterized quantum circuit is trained to approximate repeated Trotterized Hamiltonian simulation operators, which are then used to replace repeated unitary segments appearing in the sampled trajectories. Importantly, the training procedure can also be performed without auxiliary qubits. Numerical simulations of the dissipative quantum XY model demonstrate the accuracy and resource efficiency of the proposed algorithm. Our results provide a practical route toward ancilla-free and depth-reduced simulation of open quantum systems on near-term quantum hardware.
Open quantum systems host a wide range of intriguing phenomena, yet their simulation on well-controlled quantum devices is challenging, owing to the exponential growth of the Hilbert space and the inherently non-unitary nature of the dynamics. Here we propose and experimentally demonstrate a variational quantum algorithm capable of scalable simulation of non-unitary many-body dissipative dynamics. The algorithm builds on the framework of linear combination of Hamiltonian simulation, which converts non-unitary dynamics into a weighted sum of unitary evolutions. With the further introduction of a simplified quantum circuit for loss-function evaluation, our scheme is suitable for near-term quantum hardware, with the circuit depth independent of the simulation time. We illustrate our scheme by simulating the collective dynamics of a dissipative transverse Ising model, as well as an interacting Hatano-Nelson model, on the superconducting quantum processor Wukong. Our work underlines the capability of noisy intermediate-scale quantum devices in simulating dissipative many-body dynamics and represents a step forward in exploiting their potential for solving outstanding physical problems.
Simulating open quantum systems on digital quantum computers typically relies on the use of auxiliary qubits, resulting in overheads of noisy multi-qubit gates, that severely limit execution on near-term hardware. In this work, we explore the simulation of non-Markovian dynamics as well as memory channels leveraging the method of trajectory mixing, valid for mixed unitary channels. This allows to drastically reduce circuit depth, trading entangling gates for a statistical mixture of independent, pure state trajectories. Using a realistic noise model calibrated to modern quantum processors, we show the benefits of this approach, yielding higher state fidelity and better preservation of quantum correlations. This shows the possibility of simulating long-time non-Markovian evolutions with low noise and limited resources.
Abstract Noisy Intermediate-Scale Quantum (NISQ) devices are near-term quantum computing devices that inherently suffer from imperfect gate implementation, decoherence, and measurement noise. The main type of variational quantum algorithms(VQAs) is based on Parameterized Quantum Circuits (PQCs), which, however, face practical challenges due to optimization instability of optimization caused by noise and reduced performance. In this paper, we suggest a comprehensive noise-resilient optimization framework for PQCs, which explicitly incorporates noise-resilient circuit architecture design, incorporating noise-aware training strategies into the variational optimization loop. The framework uses circuit structures that are efficient in depth and are hardware compatible in addition to adaptive optimizer choice, stochastic optimization, and averaging as a part of repeated measurement to reduce the impacts of realistic noise. Large-scale experiments are performed with different amounts of qubits, depths of the circuit and noise strengths with realistic noise models. The findings indicate that the convergence rate is faster, the stability is increased, the variability of run-to-run variability is minimized, and other robustness is better than the noise-unaware optimization techniques. Moreover, systematic studies determine optimal operating regions that optimally trade-off expressibility and noise tolerance to offer useful design advice on trusted implementation of VQAs with near-term quantum hardware.
Simulating open quantum systems is an essential technique for understanding complex physical phenomena and advancing quantum technologies. Some quantum algorithms simulate Lindblad dynamics exponentially accurately, i.e., they achieve logarithmically short circuit depth in terms of accuracy, but they need to coherently encode all possible jump operators with a large ancilla consumption. Minimizing the gate and ancilla counts while achieving such a logarithmic scaling in accuracy remains an important challenge. In this work, we present two randomized quantum algorithms for simulating general Lindblad dynamics with multiple jump operators aimed at an observable estimation that achieves a circuit depth with not only logarithmic scaling in accuracy but also either partial or complete independence from the parameters specifying the Lindbladian. This is based on a novel random circuit compilation method that leverages dissipative processes with only a single jump operator, leading to the proposed methods using minimal ancilla qubits— 4 + ⌈ log 2 M ⌉ in the first case and seven in the other, where each single jump operator has at most M Pauli strings. In addition, we numerically demonstrate the practical advantage over existing approaches by providing a detailed analysis of the required gate and ancilla counts. This work represents a significant step toward making open quantum system simulations more feasible on early fault-tolerant quantum computing devices.
Characterizing the dynamics of open quantum systems at the level of microscopic interactions and error mechanisms is essential for calibrating quantum hardware, designing robust simulation protocols, and developing tailored error-correction methods. Under Markovian noise/dissipation, a natural characterization approach is to identify the full Lindbladian generator that gives rise to both coherent (Hamiltonian) and dissipative dynamics. Prior protocols for learning Lindbladians from dynamical data assumed pre-specified interaction structure, which can be restrictive when the relevant noise channels or control imperfections are not known in advance. In this paper, we present a sample-efficient protocol for learning sparse Lindbladians without assuming any a priori structure. Our protocol is ancilla-free, uses only product-state preparations and Pauli-basis measurements, admits provably stable coefficient reconstruction, and achieves near-optimal time resolution, making it compatible with near-term experimental capabilities. Together, this provides a systematic route to scalable characterization of open-system quantum dynamics, especially in settings where the error mechanisms of interest are unknown.
Abstract Quantum simulation represents the most promising quantum application to demonstrate quantum advantage on near-term noisy intermediate-scale quantum (NISQ) computers, yet available quantum simulation algorithms are prone to errors and thus difficult to realize with limited circuit depth on nowadays quantum devices. Herein, we propose a novel scheme to utilize intrinsic gate errors of NISQ devices to enable controllable simulation of open quantum system dynamics without ancillary qubits or explicit bath engineering, thus turning unwanted quantum noises into useful quantum resources. Specifically, we simulate the energy transfer process in a photosynthetic dimer system on IBM-Q cloud. By employing tailored decoherence-inducing gates, we show that quantum dissipative dynamics can be simulated efficiently across coherent-to-incoherent regimes with results comparable to those of the numerically exact classical method. Moreover, we demonstrate a calibration routine that enables consistent and predictive simulations of open-quantum system dynamics in the intermediate coupling regime. This work provides a new direction for quantum advantage in the NISQ era.