Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2606.12180

Experimental straintronics in nanotube quantum dots

L. Huang, I. G. Rebollo, A. R. Champagne

cond-mat.mes-hallcond-mat.mtrl-scicond-mat.str-elquant-phSubmitted Jun 10, 2026• Announced Jun 11, 2026
arXivHTMLPDF

Abstract

Single-wall carbon nanotubes (SWCNTs) are narrow ribbons of graphene with atomically precise edges and a single quantum transport channel, at experimentally-relevant dopings. This makes them ideal systems to harness quantum transport straintronics (QTS), i.e. using mechanical strain to control accurately quantum transport. We present QTS data from three single-wall carbon nanotube quantum dot (SWCNT-QD) transistors over a broad range of in-situ tunable and reversible uniaxial strain ($Δ\varepsilon_\text{mech}\approx$ 0 to 3 %). We first present the nanofabrication of the suspended SWCNT transistors whose channel lengths are $\approx$ 30 nm. The channels are strained by moving gold clamps holding firmly the nanotubes. We present detailed charge transport data, $dI/dV_{\text{B}} - V_{\text{B}} - V_{\text{G}}$ and $dI/dV_{\text{B}} - V_{\text{B}} - Δ\varepsilon_\text{mech}$, showing a large mechanical-gating effect of the SWCNT-QDs. The precise reversibility of the data, and their agreement with QTS theory, confirms that the tubes are strained elastically. We demonstrate that the mechanical control of the QD doping is not due to capacitive-gating effects, but to quantitatively predictable bandstructure changes including a strain-tunable bandgap. This precise mechanical control of the doping and bandgap of SWCNT-QDs could find applications in qubits, condensed matter physics, and homojunction molecular transistors.

Related papers

On quantum optical properties of single-walled carbon nanotube

Zhenyu Guo, Zhirui Gong, C. P. Sun

We study quantum optical properties of the single-walled carbon nanotube (SWCNT) by introducing the effective interaction between the quantized electromagnetic field and the confined electrons in the SWCNT. Our purpose is to explore the quantum natures of electron transport in the SWCNT by probing its various quantum optical properties relevant to quantum coherence, such as the interference of the scattered and emitted photons, and the bunching and anti-bunching of photons which are characterized by the higher order coherence functions. In the strong field limit, we study the interband Rabi oscillation of electrons driven by a classical light. We also investigate the possible lasing mechanism in superradiation of coherent electrons in a SWCNT driven by a light pump or electron injection, which generate electron population inversion in the higher energy-band of SWCNT.

arXiv:0904.2231•Apr 15, 2009•0 citations

The carbon nanotube gatemon qubit

H. Riechert, S. Annabi, A. Peugeot +8 more

Gate-tunable transmon qubits are based on quantum conductors used as weak links within hybrid Josephson junctions. These gatemons have been implemented in just a handful of systems, all relying on extended conductors, namely epitaxial semiconductors or exfoliated graphene. Here we present the coherent control of a gatemon based on a single molecule, a one-dimensional carbon nanotube, which is integrated into a circuit quantum electrodynamics architecture. The measured qubit spectrum can be tuned with a gate voltage and reflects the quantum dot behavior of the nanotube. Our ultraclean integration, using a hexagonal boron nitride substrate, results in record coherence times of 200 ns for carbon nanotube-based qubits. Furthermore, we investigate its decoherence mechanisms, thus revealing a strong gate dependence and identifying charge noise as a limiting factor. On top of positioning carbon nanotubes as contenders for future quantum technologies, our work paves the way for studying microscopic fermionic processes in low-dimensional quantum conductors. Gatemons, or gate-tunable transmons, are superconducting qubits based on hybrid Josephson junctions, which typically use extended quantum conductors as weak links. Here the authors report a gatemon made with a carbon-nanotube-based junction, showing improved coherence time compared to graphene-based devices.

arXiv:2503.01978•Nature Communications•Aug 5, 2025•11 citations

Non-Fermi-liquid behavior in transport across carbon nanotube quantum dots

Leonhard Mayrhofer, Milena Grifoni

A low energy theory for nonlinear transport in finite-size single-wall carbon nanotubes, based on a microscopic model for the interacting ${p}_{z}$ electrons and successive bosonization, is presented. Due to the multiple degeneracy of the energy spectrum diagonal as well as off-diagonal (coherences) elements of the reduced density matrix contribute to the nonlinear transport. A four-electron periodicity with a characteristic ratio between adjacent peaks, as well as nonlinear transport features, in quantitative agreement with recent experiments, are predicted.

arXiv:cond-mat/0606214•Physical Review B•Sep 19, 2006•22 citations

Doped carbon nanotubes as quantum memory devices

Mikhail B. Belonenko, Nikolay G. Lebedev

Based on the given analysis of the phonon spectrum of single-walled carbon nanotubes, it was suggested that tubes doped with foreign atoms be used as quantum memory devices. The longer decoherence time in such devices is accounted for by the suppression of phonon transition due to a gap observed in the phonon spectrum of carbon nanotubes.

Bulletin of the Russian Academy of Sciences Physics•Dec 1, 2009•1 citation

Microwave Optomechanics with a Carbon Nanotube Quantum Dot

Stefan Blien

This thesis deals with the implementation and demonstration of an optomechanical system that is composed of a superconducting microwave resonator and a suspended carbon nanotube (CNT). This is of particular interest, as CNTS - being macromolecules - have outstanding electronic and mechanical properties. Single electron effects combined with large mechanical resonance frequencies, quality factors, and zero-point motion amplitudes make possible promising applications in the field of quantum information processing or fundamental research, e.g. the synthesis of arbitrary quantum states. Besides the assembly of a high frequency measurement setup for cryogenic temperatures in the millikelvin range, introductory chapters discuss electronic and mechanical characteristics of carbon nanotubes. Here, two different fabrication techniques are described, the overgrowth and the fork transfer process. The physics of superconducting microwave resonators in coplanar waveguide geometry is introduced. Their high frequency behaviour at low temperatures is described by a transition from Mattis-Bardeen to two-level system theory. This serves as a means to investigate the high frequency material properties of a molybdenum/rhenium alloy, which is particularly suitable for the overgrowth process. Device design adjustments and considerations are described that were necessary for the integration of CNTs into hybrid geometries using the fork transfer process. Through this, the (previously demonstrated) electronic coupling of a carbon nanotube to a microwave resonator could be successfully experimentally demonstrated. There, the transmission of the resonator is sensitive to single electron tunneling processes in the CNT. The central point of this thesis is the introduction to the field of dispersive optomechanics. Here, the interaction of a vibrating carbon nanotube and a microwave field is investigated. A mechanism based on the quantum capacitance enhances this otherwise negligible coupling by orders of magnitude. Through an optomechanically induced transparency experiment, this coupling was experimentally quantified. A comparison to the beforehand deduced theory shows a very good agreement. In conclusion, subsequent prospective experiments towards optomechanical cooling and motion manipulation are explained and preliminary experimental data are discussed.

•Jan 1, 2021•0 citations

Coupling carbon nanotube mechanics to a superconducting circuit

Ben H. Schneider, Samir Etaki, Herre S. J. van der Zant +1 more

The quantum behaviour of mechanical resonators is a new and emerging field driven by recent experiments reaching the quantum ground state. The high frequency, small mass, and large quality-factor of carbon nanotube resonators make them attractive for quantum nanomechanical applications. A common element in experiments achieving the resonator ground state is a second quantum system, such as coherent photons or a superconducting device, coupled to the resonators motion. For nanotubes, however, this is a challenge due to their small size. Here, we couple a carbon nanoelectromechanical (NEMS) device to a superconducting circuit. Suspended carbon nanotubes act as both superconducting junctions and moving elements in a Superconducting Quantum Interference Device (SQUID). We observe a strong modulation of the flux through the SQUID from displacements of the nanotube. Incorporating this SQUID into superconducting resonators and qubits should enable the detection and manipulation of nanotube mechanical quantum states at the single-phonon level.

arXiv:1209.1514•Scientific Reports•Sep 3, 2012•66 citations
Single-wall carbon nanotubes (SWCNTs) are narrow ribbons of graphene with atomically precise edges and a single quantum transport channel, at experimentally-relevant dopings. This makes them ideal systems to harness quantum transport straintronics (QTS), i.e. using mechanical strain to control accurately quantum transport. We present QTS data from three single-wall carbon nanotube quantum dot (SWCNT-QD) transistors over a broad range of in-situ tunable and reversible uniaxial strain (Δεmech≈Δ\varepsilon_\text{mech}\approxΔεmech​≈ 0 to 3 %). We first present the nanofabrication of the suspended SWCNT transistors whose channel lengths are ≈\approx≈ 30 nm. The channels are strained by moving gold clamps holding firmly the nanotubes. We present detailed charge transport data, dI/dVB−VB−VGdI/dV_{\text{B}} - V_{\text{B}} - V_{\text{G}}dI/dVB​−VB​−VG​ and dI/dVB−VB−ΔεmechdI/dV_{\text{B}} - V_{\text{B}} - Δ\varepsilon_\text{mech}dI/dVB​−VB​−Δεmech​, showing a large mechanical-gating effect of the SWCNT-QDs. The precise reversibility of the data, and their agreement with QTS theory, confirms that the tubes are strained elastically. We demonstrate that the mechanical control of the QD doping is not due to capacitive-gating effects, but to quantitatively predictable bandstructure changes including a strain-tunable bandgap. This precise mechanical control of the doping and bandgap of SWCNT-QDs could find applications in qubits, condensed matter physics, and homojunction molecular transistors.
We study quantum optical properties of the single-walled carbon nanotube (SWCNT) by introducing the effective interaction between the quantized electromagnetic field and the confined electrons in the SWCNT. Our purpose is to explore the quantum natures of electron transport in the SWCNT by probing its various quantum optical properties relevant to quantum coherence, such as the interference of the scattered and emitted photons, and the bunching and anti-bunching of photons which are characterized by the higher order coherence functions. In the strong field limit, we study the interband Rabi oscillation of electrons driven by a classical light. We also investigate the possible lasing mechanism in superradiation of coherent electrons in a SWCNT driven by a light pump or electron injection, which generate electron population inversion in the higher energy-band of SWCNT.
Gate-tunable transmon qubits are based on quantum conductors used as weak links within hybrid Josephson junctions. These gatemons have been implemented in just a handful of systems, all relying on extended conductors, namely epitaxial semiconductors or exfoliated graphene. Here we present the coherent control of a gatemon based on a single molecule, a one-dimensional carbon nanotube, which is integrated into a circuit quantum electrodynamics architecture. The measured qubit spectrum can be tuned with a gate voltage and reflects the quantum dot behavior of the nanotube. Our ultraclean integration, using a hexagonal boron nitride substrate, results in record coherence times of 200 ns for carbon nanotube-based qubits. Furthermore, we investigate its decoherence mechanisms, thus revealing a strong gate dependence and identifying charge noise as a limiting factor. On top of positioning carbon nanotubes as contenders for future quantum technologies, our work paves the way for studying microscopic fermionic processes in low-dimensional quantum conductors. Gatemons, or gate-tunable transmons, are superconducting qubits based on hybrid Josephson junctions, which typically use extended quantum conductors as weak links. Here the authors report a gatemon made with a carbon-nanotube-based junction, showing improved coherence time compared to graphene-based devices.
A low energy theory for nonlinear transport in finite-size single-wall carbon nanotubes, based on a microscopic model for the interacting pz{p}_{z}pz​ electrons and successive bosonization, is presented. Due to the multiple degeneracy of the energy spectrum diagonal as well as off-diagonal (coherences) elements of the reduced density matrix contribute to the nonlinear transport. A four-electron periodicity with a characteristic ratio between adjacent peaks, as well as nonlinear transport features, in quantitative agreement with recent experiments, are predicted.
This thesis deals with the implementation and demonstration of an optomechanical system that is composed of a superconducting microwave resonator and a suspended carbon nanotube (CNT). This is of particular interest, as CNTS - being macromolecules - have outstanding electronic and mechanical properties. Single electron effects combined with large mechanical resonance frequencies, quality factors, and zero-point motion amplitudes make possible promising applications in the field of quantum information processing or fundamental research, e.g. the synthesis of arbitrary quantum states. Besides the assembly of a high frequency measurement setup for cryogenic temperatures in the millikelvin range, introductory chapters discuss electronic and mechanical characteristics of carbon nanotubes. Here, two different fabrication techniques are described, the overgrowth and the fork transfer process. The physics of superconducting microwave resonators in coplanar waveguide geometry is introduced. Their high frequency behaviour at low temperatures is described by a transition from Mattis-Bardeen to two-level system theory. This serves as a means to investigate the high frequency material properties of a molybdenum/rhenium alloy, which is particularly suitable for the overgrowth process. Device design adjustments and considerations are described that were necessary for the integration of CNTs into hybrid geometries using the fork transfer process. Through this, the (previously demonstrated) electronic coupling of a carbon nanotube to a microwave resonator could be successfully experimentally demonstrated. There, the transmission of the resonator is sensitive to single electron tunneling processes in the CNT. The central point of this thesis is the introduction to the field of dispersive optomechanics. Here, the interaction of a vibrating carbon nanotube and a microwave field is investigated. A mechanism based on the quantum capacitance enhances this otherwise negligible coupling by orders of magnitude. Through an optomechanically induced transparency experiment, this coupling was experimentally quantified. A comparison to the beforehand deduced theory shows a very good agreement. In conclusion, subsequent prospective experiments towards optomechanical cooling and motion manipulation are explained and preliminary experimental data are discussed.
The quantum behaviour of mechanical resonators is a new and emerging field driven by recent experiments reaching the quantum ground state. The high frequency, small mass, and large quality-factor of carbon nanotube resonators make them attractive for quantum nanomechanical applications. A common element in experiments achieving the resonator ground state is a second quantum system, such as coherent photons or a superconducting device, coupled to the resonators motion. For nanotubes, however, this is a challenge due to their small size. Here, we couple a carbon nanoelectromechanical (NEMS) device to a superconducting circuit. Suspended carbon nanotubes act as both superconducting junctions and moving elements in a Superconducting Quantum Interference Device (SQUID). We observe a strong modulation of the flux through the SQUID from displacements of the nanotube. Incorporating this SQUID into superconducting resonators and qubits should enable the detection and manipulation of nanotube mechanical quantum states at the single-phonon level.