Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2605.16694

A Compact, Robust, and Tunable Open Microcavity Platform for Solid-State Quantum Electrodynamics

Thi D. Hoang, Fateme Mahdikhany, Zixuan Wang, Richard Mirin, Kevin Silverman, Poolad Imany, Shuo Sun

quant-phphysics.opticsSubmitted May 15, 2026• Announced May 19, 2026
arXivHTMLPDF

Abstract

Open microcavities provide a powerful platform for studying cavity quantum electrodynamics in solid-state systems. However, operating open microcavities at cryogenic temperatures, as required for many solid-state quantum emitters, typically demands bulky and cryostat-specific vibration-mitigation setups. Here we report a compact, robust, and tunable mechanical host for an open microcavity. The complete mechanical assembly fits within a footprint of $1'' \times 1'' \times 0.5''$. Using this mechanical host, we observe no vibration-induced cavity broadening for an open microcavity with finesse exceeding 1,000 without cryostat customization or active locking. The assembly also enables in situ tuning of the cavity resonance over 3 nm, and the resonance of the same cavity remains within this range across multiple cooldowns. To further showcase the capability of this assembly, we demonstrate coupling between an InGaAs quantum dot and an open microcavity with a cooperativity exceeding unity. This platform provides a versatile testbed for fundamental cavity quantum electrodynamics and a scalable route to portable quantum light sources and spin-photon interfaces for quantum repeaters, quantum networks, and photonic quantum computing.

Comments
20 pages, 13 figures, to be published in Optica Quantum

Related papers

A Versatile Assembly for Cavity QED with Solid State Emitters in an Open Microcavity

Thi D. Hoang, Poolad Imany, Fateme Mahdikhany +3 more

We developed a compact, robust open-microcavity assembly operating in vibration-prone cryostats without active stabilization. The cavity maintained its resonance across 6 cooldowns and achieved a cooperativity of 2.6 with an InAs quantum dot. [1]

•Jan 1, 2026•0 citations

A highly stable and fully tunable open microcavity platform at cryogenic temperatures

Maximilian Pallmann, Timon Eichhorn, Julia Benedikter +3 more

Open-access microcavities are a powerful tool to enhance light-matter interactions for solid-state quantum and nano systems and are key to advance applications in quantum technologies. For this purpose, the cavities should simultaneously meet two conflicting requirements - full tunability to cope with spatial and spectral inhomogeneities of a material, and highest stability under operation in a cryogenic environment to maintain resonance conditions. To tackle this challenge, we have developed a fully-tunable, open-access, fiber-based Fabry-Pérot microcavity platform which can be operated also under increased noise levels in a closed-cycle cryostat. It comprises custom-designed monolithic micro- and nanopositioning elements with up to mm-scale travel range that achieve a passive cavity length stability at low temperature of only 15 pm rms in a closed-cycle cryostat, and 5 pm in a more quiet flow cryostat. This can be further improved by active stabilization, and even higher stability is obtained under direct mechanical contact between the cavity mirrors, yielding 0:8 pm rms during the quiet phase of the closed-cycle cryo cooler. The platform provides operation of cryogenic cavities with high finesse and small mode volume for strong enhancement of light-matter interactions, opening up novel possibilities for experiments with a great variety of quantum and nano materials.

arXiv:2212.11601•Dec 22, 2022•0 citations

A highly stable and fully tunable open microcavity platform at cryogenic temperatures

Maximilian Pallmann, Timon Eichhorn, Julia Benedikter +3 more

Open-access microcavities are a powerful tool to enhance light–matter interactions for solid-state quantum and nanosystems and are key to advance applications in quantum technologies. For this purpose, the cavities should simultaneously meet two conflicting requirements—full tunability to cope with spatial and spectral inhomogeneities of a material and highest stability under operation in a cryogenic environment to maintain resonance conditions. To tackle this challenge, we have developed a fully tunable, open-access, fiber-based Fabry–Pérot microcavity platform that can be operated under increased noise levels in a closed-cycle cryostat. It comprises custom-designed monolithic micro- and nanopositioning elements with up to mm-scale travel range that achieve a passive cavity length stability at low temperature of only 15 pm rms in a closed-cycle cryostat and 5 pm in a more quiet flow cryostat. This can be further improved by active stabilization, and even higher stability is obtained under direct mechanical contact between the cavity mirrors, yielding 0.8 pm rms during the quiet phase of the closed-cycle cryocooler. The platform provides the operation of cryogenic cavities with high finesse and small mode volume for strong enhancement of light–matter interactions, opening up novel possibilities for experiments with a great variety of quantum and nanomaterials.

APL Photonics•Mar 21, 2023•22 citations

A low-temperature tunable microcavity featuring high passive stability and microwave integration

Yanik Herrmann, Julius Fischer, Stijn Scheijen +9 more

Open microcavities offer great potential for the exploration and utilization of efficient spin-photon interfaces with Purcell-enhanced quantum emitters thanks to their large spectral and spatial tunability combined with high versatility of sample integration. However, a major challenge for this platform is the sensitivity to cavity length fluctuations in the cryogenic environment, which leads to cavity resonance frequency variations and thereby a lowered averaged Purcell enhancement. This work presents a closed-cycle cryogenic fiber-based microcavity setup, which is in particular designed for a low passive vibration level, while still providing large tunability and flexibility in fiber and sample integration, and high photon collection efficiency from the cavity mode. At temperatures below 10 K, a stability level of around 25 pm is reproducibly achieved in different setup configurations, including the extension with microwave control for manipulating the spin of cavity-coupled quantum emitters, enabling a bright photonic interface with optically active qubits.

arXiv:2409.01857•AVS Quantum Science•Dec 1, 2024•2 citations

Ultra-stable open micro-cavity platform for closed cycle cryostats

Michael Förg, Jonathan Noé, Ashly Jose +6 more

Open-access micro-cavities are a powerful tool for enhancing light-matter interactions for solid-state quantum and nano systems and are key to advance applications in quantum technologies. In order to achieve good coherence properties of the material, most of them have to be cooled down to cryogenic temperatures. In addition, the use of external magnetic fields is required for many emitter classes to fine-tune optical transitions. Here, we present the integration of a fully-tunable, open-access, fiber-based Fabry-Pérot micro-cavity platform into the vibrational environments of different closed-cycle cryostats reaching sub-pm mechanical stability. In addition, we show the development of superconducting coils to generate fields up to 150 mT for those cryogenic cavity scenarios.

Quantum 2.0 Conference and Exhibition•Jan 1, 2025•0 citations

Coherent Coupling of a Diamond Tin-Vacancy Center to a Tunable Open Microcavity

Yanik Herrmann, Julius Fischer, Julia M. Brevoord +8 more

Efficient coupling of optically active qubits to optical cavities is a key challenge for solid-state-based quantum optics experiments and future quantum technologies. Here we present a quantum photonic interface based on a single tin-vacancy center in a micrometer-thin diamond membrane coupled to a tunable open microcavity. We use the full tunability of the microcavity to selectively address individual tin-vacancy centers within the cavity mode volume. Purcell enhancement of the tin-vacancy center optical transition is evidenced both by optical excited state lifetime reduction and by optical linewidth broadening. As the emitter selectively reflects the single-photon component of the incident light, the coupled emitter-cavity system exhibits strong quantum nonlinear behavior. On resonance, we observe a transmission dip of 50% for low incident photon number per Purcell-reduced excited state lifetime, while the dip disappears as the emitter is saturated with higher photon number. Moreover, we demonstrate that the emitter strongly modifies the photon statistics of the transmitted light by observing photon bunching. This work establishes a versatile and tunable platform for advanced quantum optics experiments and proof-of-principle demonstrations on quantum networking with solid-state qubits. Published by the American Physical Society 2024

arXiv:2311.08456•Physical Review X•Oct 15, 2024•23 citations
Open microcavities provide a powerful platform for studying cavity quantum electrodynamics in solid-state systems. However, operating open microcavities at cryogenic temperatures, as required for many solid-state quantum emitters, typically demands bulky and cryostat-specific vibration-mitigation setups. Here we report a compact, robust, and tunable mechanical host for an open microcavity. The complete mechanical assembly fits within a footprint of 1′′×1′′×0.5′′1'' \times 1'' \times 0.5''1′′×1′′×0.5′′. Using this mechanical host, we observe no vibration-induced cavity broadening for an open microcavity with finesse exceeding 1,000 without cryostat customization or active locking. The assembly also enables in situ tuning of the cavity resonance over 3 nm, and the resonance of the same cavity remains within this range across multiple cooldowns. To further showcase the capability of this assembly, we demonstrate coupling between an InGaAs quantum dot and an open microcavity with a cooperativity exceeding unity. This platform provides a versatile testbed for fundamental cavity quantum electrodynamics and a scalable route to portable quantum light sources and spin-photon interfaces for quantum repeaters, quantum networks, and photonic quantum computing.
Open-access microcavities are a powerful tool to enhance light-matter interactions for solid-state quantum and nano systems and are key to advance applications in quantum technologies. For this purpose, the cavities should simultaneously meet two conflicting requirements - full tunability to cope with spatial and spectral inhomogeneities of a material, and highest stability under operation in a cryogenic environment to maintain resonance conditions. To tackle this challenge, we have developed a fully-tunable, open-access, fiber-based Fabry-Pérot microcavity platform which can be operated also under increased noise levels in a closed-cycle cryostat. It comprises custom-designed monolithic micro- and nanopositioning elements with up to mm-scale travel range that achieve a passive cavity length stability at low temperature of only 15 pm rms in a closed-cycle cryostat, and 5 pm in a more quiet flow cryostat. This can be further improved by active stabilization, and even higher stability is obtained under direct mechanical contact between the cavity mirrors, yielding 0:8 pm rms during the quiet phase of the closed-cycle cryo cooler. The platform provides operation of cryogenic cavities with high finesse and small mode volume for strong enhancement of light-matter interactions, opening up novel possibilities for experiments with a great variety of quantum and nano materials.
Open-access microcavities are a powerful tool to enhance light–matter interactions for solid-state quantum and nanosystems and are key to advance applications in quantum technologies. For this purpose, the cavities should simultaneously meet two conflicting requirements—full tunability to cope with spatial and spectral inhomogeneities of a material and highest stability under operation in a cryogenic environment to maintain resonance conditions. To tackle this challenge, we have developed a fully tunable, open-access, fiber-based Fabry–Pérot microcavity platform that can be operated under increased noise levels in a closed-cycle cryostat. It comprises custom-designed monolithic micro- and nanopositioning elements with up to mm-scale travel range that achieve a passive cavity length stability at low temperature of only 15 pm rms in a closed-cycle cryostat and 5 pm in a more quiet flow cryostat. This can be further improved by active stabilization, and even higher stability is obtained under direct mechanical contact between the cavity mirrors, yielding 0.8 pm rms during the quiet phase of the closed-cycle cryocooler. The platform provides the operation of cryogenic cavities with high finesse and small mode volume for strong enhancement of light–matter interactions, opening up novel possibilities for experiments with a great variety of quantum and nanomaterials.
Open microcavities offer great potential for the exploration and utilization of efficient spin-photon interfaces with Purcell-enhanced quantum emitters thanks to their large spectral and spatial tunability combined with high versatility of sample integration. However, a major challenge for this platform is the sensitivity to cavity length fluctuations in the cryogenic environment, which leads to cavity resonance frequency variations and thereby a lowered averaged Purcell enhancement. This work presents a closed-cycle cryogenic fiber-based microcavity setup, which is in particular designed for a low passive vibration level, while still providing large tunability and flexibility in fiber and sample integration, and high photon collection efficiency from the cavity mode. At temperatures below 10 K, a stability level of around 25 pm is reproducibly achieved in different setup configurations, including the extension with microwave control for manipulating the spin of cavity-coupled quantum emitters, enabling a bright photonic interface with optically active qubits.
Open-access micro-cavities are a powerful tool for enhancing light-matter interactions for solid-state quantum and nano systems and are key to advance applications in quantum technologies. In order to achieve good coherence properties of the material, most of them have to be cooled down to cryogenic temperatures. In addition, the use of external magnetic fields is required for many emitter classes to fine-tune optical transitions. Here, we present the integration of a fully-tunable, open-access, fiber-based Fabry-Pérot micro-cavity platform into the vibrational environments of different closed-cycle cryostats reaching sub-pm mechanical stability. In addition, we show the development of superconducting coils to generate fields up to 150 mT for those cryogenic cavity scenarios.
Efficient coupling of optically active qubits to optical cavities is a key challenge for solid-state-based quantum optics experiments and future quantum technologies. Here we present a quantum photonic interface based on a single tin-vacancy center in a micrometer-thin diamond membrane coupled to a tunable open microcavity. We use the full tunability of the microcavity to selectively address individual tin-vacancy centers within the cavity mode volume. Purcell enhancement of the tin-vacancy center optical transition is evidenced both by optical excited state lifetime reduction and by optical linewidth broadening. As the emitter selectively reflects the single-photon component of the incident light, the coupled emitter-cavity system exhibits strong quantum nonlinear behavior. On resonance, we observe a transmission dip of 50% for low incident photon number per Purcell-reduced excited state lifetime, while the dip disappears as the emitter is saturated with higher photon number. Moreover, we demonstrate that the emitter strongly modifies the photon statistics of the transmitted light by observing photon bunching. This work establishes a versatile and tunable platform for advanced quantum optics experiments and proof-of-principle demonstrations on quantum networking with solid-state qubits. Published by the American Physical Society 2024