Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2604.25026

Networked Realization of Quantum LDPC Codes

Swayangprabha Shaw, Narayanan Rengaswamy

quant-phcs.ITSubmitted Apr 27, 2026• Announced Apr 29, 2026• 0 citations
arXivHTMLPDF

Abstract

Quantum low-density parity-check (QLDPC) codes with good parameters are promising candidates for low-overhead fault-tolerant quantum computing, but their non-local stabilizers require long-range connectivity and frequent qubit movement, introducing practical challenges. Prior work has studied the networked implementation of topological codes, where each node only holds one or a few qubits of the entire code, and demonstrated competitive performance under practical constraints such as the quality of network-provided entanglement. However, since these codes are already geometrically local, such a networked setting might not be essential. In this work, we propose and study the networked implementation of better QLDPC codes, specifically bivariate bicycle codes due to their similarity to surface codes and the controlled amount of long-range connections in their stabilizers. We begin by recreating networked surface codes in Stim, with one code qubit per node, and provide additional insights into their circuit-level noise performance. We then extend this approach to bipartitions of bivariate bicycle codes, using balanced min-cut partitioning on their combined X-Z Tanner graph to identify optimal qubit splits. For stabilizers spanning nodes, we implement teleported CNOTs and vary the Bell pair fidelity enabling these gates. Through circuit-level noise simulations with BP-OSD decoding, we provide the first insights into networked realizations of these codes and compare their performance with monolithic implementations. We conclude by outlining advantages, limitations, and future directions.

Comments
9 pages, 6 figures

Related papers

Distributed Quantum Error Correction with Bivariate Bicycle Codes in a Modular Architecture

Nitish Kumar Chandra, Eneet Kaur, Reza Nejabati +1 more

Quantum low density parity check (qLDPC) codes, particularly bivariate bicycle (BB) codes, achieve competitive fault tolerance thresholds while offering substantially higher encoding rates than planar surface codes. However, their intrinsically long-range stabilizer structure makes them difficult to implement on monolithic devices with nearest neighbor connectivity and limited qubit capacity. In this work, we study the realization of a BB code in a modular multiprocessor architecture, where quantum processors are interconnected through shared Bell pairs. We consider processors with all to all internal connectivity, which is feasible on trapped ion and neutral atom platforms, enabling flexible local gate execution while inter-processor (nonlocal) gates are mediated by shared entanglement. We describe a star network architecture that can realize this distributed setting. We partition the qubits of the [[144,12,12]] BB code across 4, 6, and 12 quantum processors and analyze the resulting logical error rates and pseudo-threshold performance under circuit level noise by varying the number of processors and a scaling factor that captures the additional noise associated with nonlocal operations. We use Monte Carlo simulations with BP+OSD decoding and extend the previously known BB code ansatz to the distributed setting. Our results provide architectural insight and design considerations for distributed BB codes in modular quantum computing architectures.

quant-pharXiv:2605.04663•May 7, 2026•0 citations

Routing Codes: High-Rate Quantum LDPC Codes with Short, Parallel Non-Local Connectivity

Jiaxuan Zhang, Zhao-Yun Chen, Peng Duan +6 more

Quantum low-density parity-check (qLDPC) codes are promising candidates for realizing large-scale fault-tolerant quantum computing. Although many codes with favorable theoretical parameters have been developed, their practical adoption must take hardware implementability into account. For mainstream quantum platforms such as superconductors and neutral atoms, the connectivity, the length of non-local couplings, and the complexity of wiring or atom rearrangement are key factors that dictate the difficulty of hardware realization. Here, we propose a new family of qLDPC codes, termed routing codes. Within this family, we find explicit instances whose encoding rates are competitive to those of bivariate bicycle (BB) codes, while systematically reducing qubit connectivity, shortening the length of non-local couplings, and, crucially, making all non-local couplings mutually parallel. This parallelism translates into quantifiable benefits, substantially reducing wiring crossings in superconducting multi-layer architectures and simplifying the scheduling of atom movement in neutral-atom arrays. The weight-7 routing codes maintain a high threshold of 0.7\% and reduce the physical qubit overhead by approximately a factor of 8, compared to surface codes achieving a same logical error rate. Further increasing the weight to 11 yields a [[200, 24, 14]] and [[200, 16, 17]] codes with an encoding rate over 23 times that of the surface code, at the cost of a higher logical error rate. These results establish routing codes as a hardware-centric qLDPC family that bridges the gap between theoretical optimality and near-term physical feasibility.

quant-pharXiv:2606.25330•Jun 25, 2026•0 citations

Self-dual Stacked Quantum Low-Density Parity-Check Codes

Ze-Chuan Liu, Chong-Yuan Xu, Yong Xu

Quantum low-density parity-check (qLDPC) codes are promising candidates for fault-tolerant quantum computation due to their high encoding rates and distances. However, implementing logical operations using qLDPC codes presents significant challenges. Previous research has demonstrated that self-dual qLDPC codes facilitate the implementation of transversal Clifford gates. Here we introduce a method for constructing self-dual qLDPC codes by stacking non-self-dual qLDPC codes. Leveraging this methodology, we develop double-chain bicycle codes, double-layer bivariate bicycle (BB) codes, double-layer twisted BB codes, and double-layer reflection codes, many of which exhibit favorable code parameters. Additionally, we conduct numerical calculations to assess the performance of these codes as quantum memory under the circuit-level noise model, revealing that the logical failure rate can be significantly reduced with high pseudo-thresholds.

quant-pharXiv:2602.15372•Feb 18, 2026•0 citations

Toward a 2D Local Implementation of Quantum Low-Density Parity-Check Codes

Noah Berthusen, Dhruv Devulapalli, Eddie Schoute +4 more

Geometric locality is an important theoretical and practical factor for quantum low-density parity-check (qLDPC) codes that affects code performance and ease of physical realization. For device architectures restricted to two-dimensional (2D) local gates, naively implementing the high-rate codes suitable for low-overhead fault-tolerant quantum computing incurs prohibitive overhead. In this work, we present an error-correction protocol built on a bilayer architecture that aims to reduce operational overheads when restricted to 2D local gates by measuring some generators less frequently than others. We investigate the family of bivariate-bicycle qLDPC codes and show that they are well suited for a parallel syndrome-measurement scheme using fast routing with local operations and classical communication (LOCC). Through circuit-level simulations, we find that in some parameter regimes, bivariate-bicycle codes implemented with this protocol have logical error rates comparable to the surface code while using fewer physical qubits.

arXiv:2404.17676•PRX Quantum•Jan 9, 2025•31 citations

Efficient Routing of Quantum LDPC Codes on Programmable 2D Toric Architectures

Kun Liu, Takahiro Tsunoda, Sophia H. Xue +5 more

Quantum low-density parity-check codes are promising candidates towards scalable fault-tolerant quantum computation. Among these, bivariate bicycle (BB) codes offer superior encoding rates and large code distance compared to surface codes. However, their requirement on long-range stabilizer measurements poses significant challenges for implementation on realistic hardware with limited connectivity, such as superconducting circuit platforms. In this work, we introduce a novel hardware-software co-design that leverages a programmable communication network architecture to address these limitations. Our approach utilizes a 2D toric network of oscillators as a flexible communication fabric linking qubits at each site. Such architecture significantly reduces the number of long-range couplers required from $O(n)$ to $O(\sqrt{n})$. Dual-rail qubits, along with native gates including Swap-Wait-Swap gates and beamsplitter SWAPs, ensure that long-range two-qubit gates can be executed with high fidelity and low latency. To further enhance performance, our qubit layout and routing algorithm utilize symmetries of the codes and enable maximum parallelism for long-range two-qubit gates, maintaining a low syndrome extraction cycle duration and scalability over the code length. We perform circuit-level simulation with realistic noise modeling based on experimental hardware parameters, observing an logical error rate per logical qubit per cycle of 3.06\% for $[[18, 4, 4]]$ BB code, 2.6$\times$ less than the existing experimental result. These findings provide a practical roadmap and identify key technological advancements needed to achieve low-overhead fault-tolerant quantum computing at scale.

quant-pharXiv:2604.18714•Apr 22, 2026•0 citations

Barbell Codes: qLDPC Codes for Superconducting Quantum Hardware

Shin Ho Choe, Vincent Steffan, Florian Vigneau +5 more

The major challenge on the way to fault-tolerant quantum computing comes from the insufficient quality of hardware components and the difficulty of scaling their number without further compromising fidelity. Quantum Low-Density Parity-Check (qLDPC) codes offer a promising solution by encoding logical qubits with low overhead and at a comparatively high code distance. However, it remains an open question how to scalably implement efficient qLDPC codes on fixed-connectivity quantum chips without increasing hardware complexity to enable the non-local interactions in their underlying QEC cycles. We resolve this challenge for the first time by introducing a family of qLDPC "barbell" codes accompanied by a realistic chip layout that natively supports all required two-qubit interactions. Crucially, the hardware complexity required to implement barbell codes remains constant as code distance increases. We provide a detailed investigation into the feasibility of all required hardware components and simulate a specific family of barbell codes against circuit-level noise. We find that, with a modest overhead of $<30$ data qubits per logical qubit, barbell codes can preserve information at a physical noise strength of $10^{-4}$ for several trillion QEC cycles. Simulations of logical multi-Pauli measurements, performed with circuits tailored to the chip, yield similar logical performance per QEC round, indicating that entangling gates between logical qubits in barbell codes can be realized fault-tolerantly.

quant-pharXiv:2606.06062•Jun 5, 2026•0 citations
Quantum low-density parity-check (QLDPC) codes with good parameters are promising candidates for low-overhead fault-tolerant quantum computing, but their non-local stabilizers require long-range connectivity and frequent qubit movement, introducing practical challenges. Prior work has studied the networked implementation of topological codes, where each node only holds one or a few qubits of the entire code, and demonstrated competitive performance under practical constraints such as the quality of network-provided entanglement. However, since these codes are already geometrically local, such a networked setting might not be essential. In this work, we propose and study the networked implementation of better QLDPC codes, specifically bivariate bicycle codes due to their similarity to surface codes and the controlled amount of long-range connections in their stabilizers. We begin by recreating networked surface codes in Stim, with one code qubit per node, and provide additional insights into their circuit-level noise performance. We then extend this approach to bipartitions of bivariate bicycle codes, using balanced min-cut partitioning on their combined X-Z Tanner graph to identify optimal qubit splits. For stabilizers spanning nodes, we implement teleported CNOTs and vary the Bell pair fidelity enabling these gates. Through circuit-level noise simulations with BP-OSD decoding, we provide the first insights into networked realizations of these codes and compare their performance with monolithic implementations. We conclude by outlining advantages, limitations, and future directions.
Quantum low density parity check (qLDPC) codes, particularly bivariate bicycle (BB) codes, achieve competitive fault tolerance thresholds while offering substantially higher encoding rates than planar surface codes. However, their intrinsically long-range stabilizer structure makes them difficult to implement on monolithic devices with nearest neighbor connectivity and limited qubit capacity. In this work, we study the realization of a BB code in a modular multiprocessor architecture, where quantum processors are interconnected through shared Bell pairs. We consider processors with all to all internal connectivity, which is feasible on trapped ion and neutral atom platforms, enabling flexible local gate execution while inter-processor (nonlocal) gates are mediated by shared entanglement. We describe a star network architecture that can realize this distributed setting. We partition the qubits of the [[144,12,12]] BB code across 4, 6, and 12 quantum processors and analyze the resulting logical error rates and pseudo-threshold performance under circuit level noise by varying the number of processors and a scaling factor that captures the additional noise associated with nonlocal operations. We use Monte Carlo simulations with BP+OSD decoding and extend the previously known BB code ansatz to the distributed setting. Our results provide architectural insight and design considerations for distributed BB codes in modular quantum computing architectures.
Quantum low-density parity-check (qLDPC) codes are promising candidates for realizing large-scale fault-tolerant quantum computing. Although many codes with favorable theoretical parameters have been developed, their practical adoption must take hardware implementability into account. For mainstream quantum platforms such as superconductors and neutral atoms, the connectivity, the length of non-local couplings, and the complexity of wiring or atom rearrangement are key factors that dictate the difficulty of hardware realization. Here, we propose a new family of qLDPC codes, termed routing codes. Within this family, we find explicit instances whose encoding rates are competitive to those of bivariate bicycle (BB) codes, while systematically reducing qubit connectivity, shortening the length of non-local couplings, and, crucially, making all non-local couplings mutually parallel. This parallelism translates into quantifiable benefits, substantially reducing wiring crossings in superconducting multi-layer architectures and simplifying the scheduling of atom movement in neutral-atom arrays. The weight-7 routing codes maintain a high threshold of 0.7\% and reduce the physical qubit overhead by approximately a factor of 8, compared to surface codes achieving a same logical error rate. Further increasing the weight to 11 yields a [[200, 24, 14]] and [[200, 16, 17]] codes with an encoding rate over 23 times that of the surface code, at the cost of a higher logical error rate. These results establish routing codes as a hardware-centric qLDPC family that bridges the gap between theoretical optimality and near-term physical feasibility.
Quantum low-density parity-check (qLDPC) codes are promising candidates for fault-tolerant quantum computation due to their high encoding rates and distances. However, implementing logical operations using qLDPC codes presents significant challenges. Previous research has demonstrated that self-dual qLDPC codes facilitate the implementation of transversal Clifford gates. Here we introduce a method for constructing self-dual qLDPC codes by stacking non-self-dual qLDPC codes. Leveraging this methodology, we develop double-chain bicycle codes, double-layer bivariate bicycle (BB) codes, double-layer twisted BB codes, and double-layer reflection codes, many of which exhibit favorable code parameters. Additionally, we conduct numerical calculations to assess the performance of these codes as quantum memory under the circuit-level noise model, revealing that the logical failure rate can be significantly reduced with high pseudo-thresholds.
Geometric locality is an important theoretical and practical factor for quantum low-density parity-check (qLDPC) codes that affects code performance and ease of physical realization. For device architectures restricted to two-dimensional (2D) local gates, naively implementing the high-rate codes suitable for low-overhead fault-tolerant quantum computing incurs prohibitive overhead. In this work, we present an error-correction protocol built on a bilayer architecture that aims to reduce operational overheads when restricted to 2D local gates by measuring some generators less frequently than others. We investigate the family of bivariate-bicycle qLDPC codes and show that they are well suited for a parallel syndrome-measurement scheme using fast routing with local operations and classical communication (LOCC). Through circuit-level simulations, we find that in some parameter regimes, bivariate-bicycle codes implemented with this protocol have logical error rates comparable to the surface code while using fewer physical qubits.
Quantum low-density parity-check codes are promising candidates towards scalable fault-tolerant quantum computation. Among these, bivariate bicycle (BB) codes offer superior encoding rates and large code distance compared to surface codes. However, their requirement on long-range stabilizer measurements poses significant challenges for implementation on realistic hardware with limited connectivity, such as superconducting circuit platforms. In this work, we introduce a novel hardware-software co-design that leverages a programmable communication network architecture to address these limitations. Our approach utilizes a 2D toric network of oscillators as a flexible communication fabric linking qubits at each site. Such architecture significantly reduces the number of long-range couplers required from O(n)O(n)O(n) to O(n)O(\sqrt{n})O(n​). Dual-rail qubits, along with native gates including Swap-Wait-Swap gates and beamsplitter SWAPs, ensure that long-range two-qubit gates can be executed with high fidelity and low latency. To further enhance performance, our qubit layout and routing algorithm utilize symmetries of the codes and enable maximum parallelism for long-range two-qubit gates, maintaining a low syndrome extraction cycle duration and scalability over the code length. We perform circuit-level simulation with realistic noise modeling based on experimental hardware parameters, observing an logical error rate per logical qubit per cycle of 3.06\% for [[18,4,4]][[18, 4, 4]][[18,4,4]] BB code, 2.6×\times× less than the existing experimental result. These findings provide a practical roadmap and identify key technological advancements needed to achieve low-overhead fault-tolerant quantum computing at scale.
The major challenge on the way to fault-tolerant quantum computing comes from the insufficient quality of hardware components and the difficulty of scaling their number without further compromising fidelity. Quantum Low-Density Parity-Check (qLDPC) codes offer a promising solution by encoding logical qubits with low overhead and at a comparatively high code distance. However, it remains an open question how to scalably implement efficient qLDPC codes on fixed-connectivity quantum chips without increasing hardware complexity to enable the non-local interactions in their underlying QEC cycles. We resolve this challenge for the first time by introducing a family of qLDPC "barbell" codes accompanied by a realistic chip layout that natively supports all required two-qubit interactions. Crucially, the hardware complexity required to implement barbell codes remains constant as code distance increases. We provide a detailed investigation into the feasibility of all required hardware components and simulate a specific family of barbell codes against circuit-level noise. We find that, with a modest overhead of <30<30<30 data qubits per logical qubit, barbell codes can preserve information at a physical noise strength of 10−410^{-4}10−4 for several trillion QEC cycles. Simulations of logical multi-Pauli measurements, performed with circuits tailored to the chip, yield similar logical performance per QEC round, indicating that entangling gates between logical qubits in barbell codes can be realized fault-tolerantly.