Phase estimation in quantum interferometry is a major scenario where the quantum advantage is significantly revealed. Recently, the optimal finite-dimensional probe states (OFPSs) for phase estimation in two-mode quantum interferometry have been provided with the absence of noise [J.-F. Qin et al., Phys. Rev. A 112, 052428 (2025)]. However, the noise is inevitable in practice and the previously obtained OFPSs may cease to be optimal anymore. Hence, the forms of the true OFPSs in the existence of various noises are still open questions. Hereby, the noise of particle loss is studied and the true OFPSs under this noise have been investigated with the numerical algorithm named constrained optimization by linear approximation. Furthermore, a two-step measurement strategy is proposed to realize the ultimate precision limit in practice. The validity of this strategy is confirmed by the numerical simulation of practical experiments.
Phase estimation in quantum interferometry is a major scenario where the quantum advantage is significantly revealed. Recently, the optimal finite-dimensional probe states (OFPSs) for phase estimation in two-mode quantum interferometry have been provided with the absence of noise [J.-F. Qin et al., Phys. Rev. A 112, 052428 (2025)]. However, the noise is inevitable in practice and the previously obtained OFPSs may cease to be optimal anymore. Hence, the forms of the true OFPSs in the existence of various noises are still open questions. Hereby, the noise of particle loss is studied and the true OFPSs under this noise have been investigated with the numerical algorithm named constrained optimization by linear approximation. Furthermore, a two-step measurement strategy is proposed to realize the ultimate precision limit in practice. The validity of this strategy is confirmed by the numerical simulation of practical experiments.
Phase estimation is a major mission in quantum metrology, especially in quantum interferometry. A full phase estimation scheme usually includes the optimal probe state and measurement. For the finite-dimensional states in Fock basis, the NOON state ceases to be optimal when the average particle number is fixed yet not equal to the Fock dimension (Fock number of the highest occupied Fock state of one mode), and what is the true optimal finite-dimensional probe state in this case is still undiscovered. Hereby we present several theorems to answer this question and provide a complete optimal scheme to realize the ultimate precision limit in practice. These optimal finite-dimensional probe states reveal an important fact that the Fock dimension could be treated as a metrological resource, and the given scheme is particularly useful in scenarios where weak light or limited particle number is demanded.
The sensitivity in optical interferometry is strongly affected by losses during the signal propagation or at the detection stage. The optimal quantum states of the probing signals in the presence of loss were recently found. However, in many cases of practical interest, their associated accuracy is worse than the one obtainable without employing quantum resources (e.g., entanglement and squeezing) but neglecting the detector's loss. Here, we detail an experiment that can reach the latter even in the presence of imperfect detectors: it employs a phase-sensitive amplification of the signals after the phase sensing, before the detection. We experimentally demonstrated the feasibility of a phase estimation experiment able to reach its optimal working regime. Since our method uses coherent states as input signals, it is a practical technique that can be used for high-sensitivity interferometry and, in contrast to the optimal strategies, does not require one to have an exact characterization of the loss beforehand.
Optical interferometry is a cornerstone technique for precise phase measurements across various fields. In many applications, for example, biological imaging, it often necessitates stringent limits on light intensity to prevent adverse effects on light-sensitive samples, a condition known as dose-limited regimes. Maximizing the precision per dose is therefore crucial. In quantum metrology, quantum correlations enable high precision in phase estimation while adhering to dose constraints. Nevertheless, photon loss, including absorption by a sample, substantially diminishes the benefits of quantum enhancement in interferometry. In this work, we experimentally investigate a dose-efficient approach to quantum phase estimation using sequential strategies in the presence of loss. Performance of sequential strategies with and without control is evaluated through quantum Fisher information (QFI) per dose. Experimental results show that both sequential strategies exceed the classical limit and outperform the parallel strategy using unbalanced N00N states. Notably, the control-enhanced sequential strategy attains superior QFI per dose, approaching the quantum limit. These results highlight the promise of sequential strategy for imaging and sensing in resource-constrained scenarios, marking a significant step toward practical and efficient quantum metrology in lossy environments.
The theory of quantum state estimation is exploited here to investigate the most efficient strategies for this task, especially targeting a complete picture identifying optimal conditions in terms of Fisher information, quantum measurement, and associated estimator. The approach is specified to estimation of the phase of a qubit in a rotation around an arbitrary given axis, equivalent to estimating the phase of an arbitrary single-qubit quantum gate, both in noise-free and then in noisy conditions. In noise-free conditions, we establish the possibility of defining an optimal quantum probe, optimal quantum measurement, and optimal estimator together capable of achieving the ultimate best performance uniformly for any unknown phase. With arbitrary quantum noise, we show that in general the optimal solutions are phase dependent and require adaptive techniques for practical implementation. However, for the important case of the depolarizing noise, we again establish the possibility of a quantum probe, quantum measurement, and estimator uniformly optimal for any unknown phase. In this way, for qubit phase estimation, without and then with quantum noise, we characterize the phase-independent optimal solutions when they generally exist, and also identify the complementary conditions where the optimal solutions are phase dependent and only adaptively implementable.
Optimal probe states and measurements are always required to achieve the best estimation precision in quantum metrology. In the actual physical environment, ubiquitous noise hinders estimation precision and amplifies the challenges of optimizing the probe states and measurements. In this study we extend a theoretical proposal, presented in Phys. Rev. A 103, 032615 (2021), to encompass noisy general Pauli channels for SU(2) phase estimation. By utilizing a superposition of different causal orders of two channels, we establish theoretically a probe-state-independent criterion for the estimation precision. We show that the probe-state-independent property results from the noncommutativity of the Kraus operators of the parameter-encoding channels. Based on this criterion, one can find some parameter-encoding channels without the requirement of precisely preparing the probe state. Moreover, our scheme requires only deterministic projection measurement on the control qubit. In this way, one can simultaneously avoid optimizing both the probe states and measurements. In addition, we also show that the estimation precision and probe-state-independent property of the indefinite causal order scheme are independent of representations of the Kraus operators. This alleviates the experimental challenges in realizing quantum channels. We demonstrate experimentally the advantages of the indefinite causal order for phase estimation of an SU(2) unitary transformation in the three kinds of quantum noise channels. Our result shows that the dynamic evolution of indefinite causal order can outperform the conventional cascaded estimation scenario at high noise levels, exhibiting high robustness and feasibility in practical estimation tasks.
It is suggested that computers exploiting quantum phenomena can solve tasks with an efficiency surpassing that achievable by classical computers. One example of this quantum advantage arises in the task of phase estimation. Here, an unknown eigenvalue of a unitary evolution is estimated, a critical subroutine for many quantum algorithms and quantum metrology protocols. For a fixed amount of resources, the utilisation of quantum coherence and entanglement can lead to a quadratic increase in precision of the final estimate compared to classical statistical limits. In systems affected by depolarising noise, including current quantum hardware, this improvement becomes a constant factor. While numerous phase estimation algorithms have been proposed claiming to achieve these theoretical limits, the lack of well-defined criteria for both precision and resource utilisation casts doubt on these results. Further issues arise due to a lack of point identification (the existence of multiple equally likely estimates) that some algorithms have. I aim to address these issues in this thesis. I employ statistical inference, the theoretical foundation for interpreting any quantum measurement, in order to find rigorous definitions for precision and resource use. By combining these definitions with previous work in the field of quantum metrology, I am able to derive theoretical precision limits that one can hope to achieve. I then outline several phase estimation algorithms that can achieve these limits in different contexts. These algorithms that I describe are split into three major groups. Algorithms in the first group focus on the process of point identification; one set of measurements provides a precise estimate of the unknown phase before an additional set of measurements removes any ambiguities present. This second set of measurements can be either decided before any measurement is taken or during measurements in an iterative fashion. I show that the balancing of resources used in each set of measurements can lead to optimally scaling precision both with and without depolarising noise. These algorithms are based upon two of my peer-reviewed articles, [Phys. Rev. A 106, 062615 (2022)] and [Phys. Rev. A 109, 042412 (2024)]. The second group of algorithms that I introduce use the principles of Bayesian experimental design. Here, previous measurement outcomes are used to select future measurements recursively. These algorithms require large classical computing times to select each measurement but boast high precision in certain metrics. The final group of algorithms exploit the oscillating nature of phases by using a discrete Fourier transform (DFT). The DFT can be implemented using either classical or quantum hardware, the latter of which leads to the famous quantum phase estimation algorithm (QPEA). In this thesis, I show that the QPEA performs worse than some classical precision limits. However, I also suggest some modifications to the QPEA circuit that can lead to optimal precision scaling. These results and modifications are described in one of my articles awaiting publication [arXiv:2505.00764].