Problems in quantum chemical simulations, especially achieving accurate excited-state potential energy surfaces, are among the primary applications to achieve quantum utility. On near-term quantum hardware, variants of the variational quantum eigensolver (VQE) algorithms are the primary choice for chemistry simulation. In this study, a combination of leading ground and excited state quantum algorithms for general excited states, namely, ADAPT-VQE/LUCJ and q-sc-EOM, are utilized to calculate accurate excited state potential energy surfaces in challenging bond-breaking scenarios and compared with the classical scalable EOM-CCSD method. This work investigates avenues toward quantum utility in excited-state quantum chemistry using the q-sc-EOM approach. We assess its accuracy while mitigating major scaling bottlenecks through the Davidson algorithm and basis rotation grouping, reducing the measurement scaling from O(N$^{12}$) to O(N$^{5}$), and implementing the method on quantum hardware with various error mitigation strategies to reduce gate and measurement errors in excited states. The hardware implementation of the q-sc-EOM algorithm, augmented by mitigation of M3 readout error and symmetry projection, produces reasonably accurate excited-state energies with gate noise identified as the predominant source of error. This paves the way for accurate and scalable, generally applicable quantum excited-state methods with potential for quantum utility while identifying critical problems that require advancements.
Problems in quantum chemical simulations, especially achieving accurate excited-state potential energy surfaces, are among the primary applications to achieve quantum utility. On near-term quantum hardware, variants of the variational quantum eigensolver (VQE) algorithms are the primary choice for chemistry simulation. In this study, a combination of leading ground and excited state quantum algorithms for general excited states, namely, ADAPT-VQE/LUCJ and q-sc-EOM, are utilized to calculate accurate excited state potential energy surfaces in challenging bond-breaking scenarios and compared with the classical scalable EOM-CCSD method. This work investigates avenues toward quantum utility in excited-state quantum chemistry using the q-sc-EOM approach. We assess its accuracy while mitigating major scaling bottlenecks through the Davidson algorithm and basis rotation grouping, reducing the measurement scaling from O(N12) to O(N5), and implementing the method on quantum hardware with various error mitigation strategies to reduce gate and measurement errors in excited states. The hardware implementation of the q-sc-EOM algorithm, augmented by mitigation of M3 readout error and symmetry projection, produces reasonably accurate excited-state energies with gate noise identified as the predominant source of error. This paves the way for accurate and scalable, generally applicable quantum excited-state methods with potential for quantum utility while identifying critical problems that require advancements.
Near-term quantum devices promise to revolutionize quantum chemistry, but simulations using the current noisy intermediate-scale quantum (NISQ) devices are not practical due to their high susceptibility to errors. This motivated the design of NISQ algorithms leveraging classical and quantum resources. While several developments have shown promising results for ground-state simulations, extending the algorithms to excited states remains challenging. This paper presents two cost-efficient excited-state algorithms inspired by the classical Davidson algorithm. We implemented the Davidson method into the quantum self-consistent equation-of-motion unitary coupled-cluster (q-sc-EOM-UCC) excited-state method adapted for quantum hardware. The circuit strategies for generating desired excited states are discussed, implemented, and tested. We demonstrate the performance and accuracy of the proposed algorithms (q-sc-EOM-UCC/Davidson and its variational variant) by simulations of H 2, H 4, LiH, and H 2 O molecules. Similar to the classical Davidson scheme, q-sc-EOM-UCC/Davidson algorithms are capable of targeting a small number of excited states of the desired character.
Abstract The prediction of electronic structure for strongly correlated molecules represents a promising application for near-term quantum computers. Significant attention has been paid to ground state wavefunctions, but excited states of molecules are relatively unexplored. In this work, we consider the adaptive, problem-tailored (ADAPT)-variational quantum eigensolver (VQE) algorithm, a single-reference approach for obtaining ground states, and its state-averaged generalization for computing multiple states at once. We demonstrate for both rectangular and linear H4, as well as for BeH2, that this approach, which we call multistate-objective, Ritz-eigenspectral (MORE)-ADAPT-VQE, can make better use of small excitation manifolds than an analogous method based on a single-reference ADAPT-VQE calculation, q-sc-EOM. In particular, MORE-ADAPT-VQE is able to accurately describe both avoided crossings and crossings between states of different symmetries. In addition to more accurate excited state energies, MORE-ADAPT-VQE can recover accurate transition dipole moments in situations where traditional ADAPT-VQE and q-sc-EOM struggle. These improvements suggest a promising direction toward the use of quantum computers for difficult excited state problems.
High Resolution Image Download MS PowerPoint Slide The recent developments of quantum computing present novel potential pathways for quantum chemistry as the scaling of the computational power of quantum computers could be harnessed to naturally encode and solve electronic structure problems. Theoretically exact quantum algorithms for chemistry have been proposed (e.g., quantum phase estimation), but the limited capabilities of current noisy intermediate-scale quantum devices motivated the development of less demanding hybrid algorithms. In this context, the variational quantum eigensolver (VQE) algorithm was successfully introduced as an effective method to compute the ground-state energies of small molecules. This study investigates the folded spectrum (FS) method as an extension of the VQE algorithm for the computation of molecular excited states. It provides the possibility of directly computing excited states around a selected target energy using the same or quantum circuit as for the ground-state calculation. Inspired by the variance-based methods from the quantum Monte Carlo literature, the FS method minimizes the energy variance, thus, in principle, requiring a computationally expensive squared Hamiltonian to be applied. We alleviate this potentially poor scaling by employing a Pauli grouping procedure to identify sets of commuting Pauli strings that can be evaluated simultaneously. This allows for a significant reduction in the computational cost. We applied the FS-VQE method to small molecules (H 2, LiH), obtaining all electronic excited states with chemical accuracy on ideal quantum simulators. Furthermore, we explore the application of quantum error mitigation techniques, demonstrating improved energy accuracy on noisy simulators compared with simulations without mitigation.
Simulation of electronic structure is one of the most promising applications on noisy intermediate-scale quantum (NISQ) era devices. However, NISQ devices suffer from a number of challenges like limited qubit connectivity, short coherence times, and sizable gate error rates. Thus, desired quantum algorithms should require shallow circuit depths and low qubit counts to take advantage of these devices. Here, we attempt to reduce quantum resource requirements for molecular simulations on a quantum computer while maintaining the desired accuracy with the help of classical quantum chemical theories of canonical transformation and explicit correlation. In this work, compact ab initio Hamiltonians are generated classically, in the second quantized form, through an approximate similarity transformation of the Hamiltonian with (a) an explicitly correlated two-body unitary operator with generalized pair excitations that remove the Coulombic electron-electron singularities from the Hamiltonian and (b) a unitary one-body operator to efficiently capture the orbital relaxation effects required for accurate description of the excited states. The resulting transcorrelated Hamiltonians are able to describe both the ground and the excited states of molecular systems in a balanced manner. Using the variational quantum eigensolver (VQE) method based on the unitary coupled cluster with singles and doubles (UCCSD) ansatz and only a minimal basis set (ANO-RCC-MB), we demonstrate that the transcorrelated Hamiltonians can produce ground state energies comparable to the reference CCSD energies with the much larger cc-pVTZ basis set. This leads to a reduction in the number of required CNOT gates by more than 3 orders of magnitude for the chemical species studied in this work. Furthermore, using the quantum equation of motion (qEOM) formalism in conjunction with the transcorrelated Hamiltonian, we are able to reduce the deviations in the excitation energies from the reference EOM-CCSD/cc-pVTZ values by an order of magnitude. The transcorrelated Hamiltonians developed here are Hermitian and contain only one- and two-body interaction terms and thus can be easily combined with any quantum algorithm for accurate electronic structure simulations.
Solving challenging problems in quantum chemistry is one of the most promising applications of quantum computers. Within the quantum algorithms proposed for problems in excited state quantum chemistry, subspace-based quantum algorithms, including quantum subspace expansion (QSE), quantum equation of motion (qEOM) and quantum self-consistent equation-of-motion (q-sc-EOM), are promising for pre-fault-tolerant quantum devices. The working equation of QSE and qEOM requires solving a generalized eigenvalue equation with associated matrix elements measured on a quantum computer. Our careful analytical and numerical analysis of the standard and generalized eigenvalue problems, especially in the context of excited-state methods, shows that the errors in eigenvalues magnify drastically with an increase in the condition number of the overlap matrix when a generalized eigenvalue equation is solved in the presence of statistical sampling errors. This makes methods such as QSE unstable to errors that are unavoidable when using quantum computers. Further, at very high condition numbers of the overlap matrix, the QSE's working equation could not be solved without any additional steps in the presence of sampling errors, as it becomes ill-conditioned. It was possible to use the thresholding technique in this case to solve the equation, but the solutions achieved had missing excited states, which may be a problem for future chemical studies. We also show that excited-state methods that have an eigenvalue equation as the working equation, such as q-sc-EOM, do not have the problems associated with the condition number and could be generally more stable to errors, and therefore, more suitable candidates for excited-state quantum chemistry calculations using quantum computers.
Accurate prediction of molecular structures and properties is vital for chemistry; materials science, and drug discovery, yet classical electronic-structure methods often fail for strongly correlated systems, large basis sets, and complex potential-energy landscapes. Quantum technology encompassing quantum computing, quantum machine learning, and hybrid quantum classical strategies offers a fundamentally new paradigm by encoding many-electron wave functions directly on qubits and exploiting superposition and entanglement to explore exponentially large Hilbert spaces. This review synthesizes recent algorithmic and hardware advances relevant to molecular modelling, including the Variational Quantum Eigensolver (VQE), Quantum Phase Estimation (QPE), quantum unitary coupled-cluster (q-UCC) families, equation-of-motion and subspace methods for excited states, tensor-network hybrids, and quantum kernel and variational QML approaches. We examine noise-aware hybrid workflows, error-mitigation techniques, symmetry-preserving ansätze, and operator-factorization methods that reduce measurement and gate overhead. Representative applications are discussed: ground- and excited-state energy prediction, potential-energy surface mapping, geometry and transition-state optimization, spectroscopic property estimation (IR, UV–Vis, NMR, EPR), and reaction-dynamics scenarios where non-adiabatic effects and conical intersections dominate. Resource estimates and scaling analyses clarify current NISQ limitations qubit counts, circuit depth, shot complexity and delineate the roadmap to fault-tolerant QPE for chemical accuracy. We compare quantum approaches with classical baselines (DFT, CCSD (T), multireference methods), identifying domains where quantum methods already show promise (strong correlation, multi-reference dissociation, spin-state ordering) and where classical methods remain competitive. Finally, we highlight near-term industrial opportunities in drug design, catalysis, CO2 capture, and energy materials, and outline critical research directions: algorithmic reductions in measurement/precision cost, hardware improvements in fidelity and connectivity, scalable ansatz design, and integrated software stacks for reproducible hybrid simulations. Together, these developments indicate that while practical, large-scale quantum advantage for general chemistry remains future work, quantum technologies are rapidly maturing into powerful tools for targeted molecular problems that are intractable with existing classical techniques.