© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:2604.03229

A scalable infrastructure for strontium optical clocks with integrated photonics

Zheng Luo, Travis C. Briles, Zachary L. Newman, Aidan R. Jones, Andrew R. Ferdinand, Sindhu Jammi, Grisha Spektor, David R. Carlson, Akash Rakholia, Dan Sheredy, Parth Patel, Martin M. Boyd, Chad Ropp, Daron Westly, Vladimir Aksyuk, Zhu, Wenqi, Junyeob Song, Amit Agrawal, Scott B. Papp

Published Apr 3, 2026• 0 citations

Abstract

Optical atomic clocks provide exceptionally accurate and precise signals for timekeeping and precision measurements, but they require high-power, free-space laser configurations that limit scalability. We introduce and explore a scalable infrastructure for strontium (Sr) optical-lattice clocks that incorporates co-design of atomic-beam slowing and a magneto-optical trap (MOT) from an effusion source, generation of complex, three-dimensional free-space laser configurations with a photonic integrated circuit (PIC) and metasurface (MS) optics, and laser stabilization to a frequency-comb supercontinuum generated with integrated nonlinear photonics. With these elements, we realize MOTs of all stable strontium isotopes ($^{84}$Sr, $^{86}$Sr, $^{87}$Sr, $^{88}$Sr) with populations commensurate with natural abundances, demonstrating precise beam control and robustness. Access to laser-cooled alkaline-earth atoms with scalable integrated photonics enables system engineering for optical clocks, quantum sensing, and quantum information, and our experiments demonstrate extensible technologies that advance toward a Sr optical clock largely free of bulk optics.

DOI: 10.48550/arxiv.2604.03229

Related papers

Towards miniaturized strontium optical lattice clock

Wei He

Optical atomic clocks with precisions and accuracies in the 10\(^-\)\(^1\)\(^8\) level [1] are now the most advanced man-made timekeeping devices. They outperform the microwave cesium atomic clocks that realize the SI definition of the second. Scaling down the size of optical atomic clocks may open the door to a range of industrial and space applications. In this thesis, the design and preliminary results of a compact strontium cooling system are presented. In the first cooling stage, the high power 461 nm laser with 300 mW output features a modular design, while smaller laser sources for demonstrating a strontium magneto-optical trap have also been investigated. An innovative design that couples a spectroscopy cell directly into the scientific chamber reduces the overall size and power consumption of the system. Additionally, using strontium oxide as a source of strontium atoms suitable for optical clocks has achieved initial success. For the first time, a single-beam MOT configuration is applied to strontium. In this novel apparatus, the blue MOT and red MOT broadband cooling phases are able to trap 5x10\(^6\) and 1000 atoms, respectively. This work shows promising progress towards developing a functional miniaturized strontium optical lattice clock.

•Jul 1, 2017•5 citations

Towards a Strontium Optical Clock System with Metasurface Optics and Integrated Nonlinear Photonics

Andrew R. Ferdinand, David R. Carlson, Zachary L. Newman +12 more

We report on a strontium optical clock built with integrated photonics. We implement free-space laser beam control of positioning, pointing, shaping, polarization, and integration with metasurface optics, and laser-frequency absolute stabilization with waveguide supercontinuum generators.

•Jan 1, 2023•1 citation

A scalable infrastructure for strontium optical clocks

Andrew R. Ferdinand, Zachary L. Newman, Wenqi Zhu +13 more

We demonstrate a scalable, integrated photonics infrastructure for optical atomic clocks. We laser cool and trap 4 × 105 87Sr atoms in a magneto-optical trap, using metasurface optics and a compact, single-chamber vacuum system.

Conference on Lasers and Electro-Optics•Jan 1, 2022•3 citations

Laser-cooling 88 Sr to microkelvin temperature with an integrated-photonics system

Andrew R. Ferdinand, Zheng Luo, Sindhu Jammi +12 more

Optical lattice clocks generate pristine timing signals, which advance understanding of physics and open new application opportunities. However, the existing experimental apparatus for such clocks consists of numerous complicated subsystems, and are laborious to assemble. This Letter demonstrates the use of integrated photonics technologies to generate the free-space optical configuration needed to laser cool and trap atomic samples for a lattice clock and to create a frequency-comb supercontinuum to stabilize the lasers for the lattice clock. The authors assemble integrated photonics devices without active alignment, highlighting the potential for scalability in lattice-clock systems.

Physical Review Applied•Mar 21, 2025•8 citations

Laser controlled atom source for optical clocks

Ole Kock, Wei Jian He, Dariusz Świerad +4 more

Precision timekeeping has been a driving force in innovation, from defining agricultural seasons to atomic clocks enabling satellite navigation, broadband communication and high-speed trading. We are on the verge of a revolution in atomic timekeeping, where optical clocks promise an over thousand-fold improvement in stability and accuracy. However, complex setups and sensitivity to thermal radiation pose limitations to progress. Here we report on an atom source for a strontium optical lattice clock which circumvents these limitations. We demonstrate fast (sub 100 ms), cold and controlled emission of strontium atomic vapours from bulk strontium oxide irradiated by a simple low power diode laser. Our results demonstrate that millions of strontium atoms from the vapour can be captured in a magneto-optical trap (MOT). Our method enables over an order of magnitude reduction in scale of the apparatus. Future applications range from satellite clocks testing general relativity to portable clocks for inertial navigation systems and relativistic geodesy.

Scientific Reports•Nov 18, 2016•34 citations

Miniaturized setups for magneto-optical trapping of ytterbium and strontium

Julian Pick, Julia Voß, Florian Löwinger +6 more

Optical lattice clocks based on ytterbium (Yb) and strontium (Sr) are emerging as key technologies in precision timekeeping and metrology. Recent advancements in miniaturization and transportability are making them increasingly accessible for applications outside traditional laboratory settings. However, the degree of miniaturization is limited by the atomic source that is used to provide laser-cooled atoms for the clock spectroscopy. Conventional atomic sources for optical lattice clocks consist of a high-power oven and a magneto-optical trap (MOT) that requires six incident laser beams for three-dimensional trapping and cooling. Here, we present technologies that allow a significant miniaturization of the required experimental setups to realize a MOT for Yb and Sr. These are a chip-based microstructured atomic oven and in-vacuum optical elements that require only a single incident laser beam to generate all of the required beams for three-dimensional trapping and cooling. The oven was manufactured with LIDE® (laser induced deep etching). It was paired with an aluminum pyramid reflector to load Yb atoms into a MOT. The oven was placed directly at the outside of the reflector, forming a compact setup that is used for atom evaporation and direct trapping and cooling. In this configuration, MOT loading rates above 10^8 atoms/s were measured for oven heating powers below 250 mW. Furthermore, the microstructured oven was paired with a grating MOT chip inside a highly compact vacuum chamber. The chamber was additively manufactured from titanium and the assembled setup spans a volume of less than 750 ml. In this setup, up to 10^5 Sr atoms were trapped in the MOT.

•Jan 1, 2026•0 citations

Optical atomic clocks provide exceptionally accurate and precise signals for timekeeping and precision measurements, but they require high-power, free-space laser configurations that limit scalability. We introduce and explore a scalable infrastructure for strontium (Sr) optical-lattice clocks that incorporates co-design of atomic-beam slowing and a magneto-optical trap (MOT) from an effusion source, generation of complex, three-dimensional free-space laser configurations with a photonic integrated circuit (PIC) and metasurface (MS) optics, and laser stabilization to a frequency-comb supercontinuum generated with integrated nonlinear photonics. With these elements, we realize MOTs of all stable strontium isotopes (

^{84}

Sr,

^{86}

Sr,

^{87}

Sr,

^{88}

Sr) with populations commensurate with natural abundances, demonstrating precise beam control and robustness. Access to laser-cooled alkaline-earth atoms with scalable integrated photonics enables system engineering for optical clocks, quantum sensing, and quantum information, and our experiments demonstrate extensible technologies that advance toward a Sr optical clock largely free of bulk optics.

Optical atomic clocks with precisions and accuracies in the 10

^-

^1

^8

level [1] are now the most advanced man-made timekeeping devices. They outperform the microwave cesium atomic clocks that realize the SI definition of the second. Scaling down the size of optical atomic clocks may open the door to a range of industrial and space applications. In this thesis, the design and preliminary results of a compact strontium cooling system are presented. In the first cooling stage, the high power 461 nm laser with 300 mW output features a modular design, while smaller laser sources for demonstrating a strontium magneto-optical trap have also been investigated. An innovative design that couples a spectroscopy cell directly into the scientific chamber reduces the overall size and power consumption of the system. Additionally, using strontium oxide as a source of strontium atoms suitable for optical clocks has achieved initial success. For the first time, a single-beam MOT configuration is applied to strontium. In this novel apparatus, the blue MOT and red MOT broadband cooling phases are able to trap 5x10

^6

and 1000 atoms, respectively. This work shows promising progress towards developing a functional miniaturized strontium optical lattice clock.

Optical lattice clocks generate pristine timing signals, which advance understanding of physics and open new application opportunities. However, the existing experimental apparatus for such clocks consists of numerous complicated subsystems, and are laborious to assemble. This Letter demonstrates the use of integrated photonics technologies to generate the free-space optical configuration needed to laser cool and trap atomic samples for a lattice clock and to create a frequency-comb supercontinuum to stabilize the lasers for the lattice clock. The authors assemble integrated photonics devices without active alignment, highlighting the potential for scalability in lattice-clock systems.

Precision timekeeping has been a driving force in innovation, from defining agricultural seasons to atomic clocks enabling satellite navigation, broadband communication and high-speed trading. We are on the verge of a revolution in atomic timekeeping, where optical clocks promise an over thousand-fold improvement in stability and accuracy. However, complex setups and sensitivity to thermal radiation pose limitations to progress. Here we report on an atom source for a strontium optical lattice clock which circumvents these limitations. We demonstrate fast (sub 100 ms), cold and controlled emission of strontium atomic vapours from bulk strontium oxide irradiated by a simple low power diode laser. Our results demonstrate that millions of strontium atoms from the vapour can be captured in a magneto-optical trap (MOT). Our method enables over an order of magnitude reduction in scale of the apparatus. Future applications range from satellite clocks testing general relativity to portable clocks for inertial navigation systems and relativistic geodesy.

Optical lattice clocks based on ytterbium (Yb) and strontium (Sr) are emerging as key technologies in precision timekeeping and metrology. Recent advancements in miniaturization and transportability are making them increasingly accessible for applications outside traditional laboratory settings. However, the degree of miniaturization is limited by the atomic source that is used to provide laser-cooled atoms for the clock spectroscopy. Conventional atomic sources for optical lattice clocks consist of a high-power oven and a magneto-optical trap (MOT) that requires six incident laser beams for three-dimensional trapping and cooling. Here, we present technologies that allow a significant miniaturization of the required experimental setups to realize a MOT for Yb and Sr. These are a chip-based microstructured atomic oven and in-vacuum optical elements that require only a single incident laser beam to generate all of the required beams for three-dimensional trapping and cooling. The oven was manufactured with LIDE® (laser induced deep etching). It was paired with an aluminum pyramid reflector to load Yb atoms into a MOT. The oven was placed directly at the outside of the reflector, forming a compact setup that is used for atom evaporation and direct trapping and cooling. In this configuration, MOT loading rates above 10^8 atoms/s were measured for oven heating powers below 250 mW. Furthermore, the microstructured oven was paired with a grating MOT chip inside a highly compact vacuum chamber. The chamber was additively manufactured from titanium and the assembled setup spans a volume of less than 750 ml. In this setup, up to 10^5 Sr atoms were trapped in the MOT.