Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.13175

Fluxon Time-Delay Readout of a Superconducting Qubit Protected by a Spectral Gap in a Josephson Transmission Line

Shunsuke Kamimura, Aree Taguchi, Masamitsu Tanaka, Tsuyoshi Yamamoto

quant-phnlin.PSphysics.app-phSubmitted Mar 13, 2026• Announced Mar 16, 2026• 0 citations
arXivHTMLPDF

Abstract

We theoretically investigate a readout scheme of the quantum state of a superconducting qubit based on time delay of a single flux quantum (SFQ), also known as a fluxon, propagating in a Josephson transmission line (JTL). We concretely study the time-delay readout based on capacitive coupling between a transmon qubit and a JTL, and we evaluate the time delay depending on the qubit state. We also reveal a feature of the absence of fluxon pinning and exponential suppression of nonadiabatic transitions caused by the propagating fluxon, which is advantageous for the time-delay readout. We extend the analysis to a multi-level transmon as well. Owing to the spectral gap in the JTL, the radiative decay of the qubit mediated by the JTL is exponentially suppressed, and thus the transmission line itself also serves as a filter protecting the qubit. The readout scheme requires neither complicated wiring to low-temperature stages nor bulky microwave components, which are bottlenecks for integration of a large-scale superconducting quantum computer.

Comments
19 pages, 5 figures

Related papers

Design of a ballistic fluxon qubit readout

Anna Herr, Arkady Fedorov, Alexander Shnirman +2 more

A detailed design is given for a flux qubit readout using ballistic fluxons. In this scheme, fluxons propagate through an underdamped Josephson transmission line (JTL) coupled to the qubit, whose state affects the fluxon propagation time. For strong qubit–JTL coupling, and far from the symmetry point, a qubit can be measured with fidelity greater than 99% and measurement time of 4 ns. The readout circuit requires additional rapid single flux quantum (RSFQ) interface circuitry to launch and receive the delayed flux solitons. The parameters of this driver and receiver have been optimized to produce low fluxon speed at launch and impedance matching at the receiver. The delayed solitons are compared to a reference line using a detector with time resolution of better than 16 ps. Both the JTL and RSFQ interface were designed for the Nb 30 A cm −2 process developed at VTT, Finland, with postdeposition of the Al qubit at IPHT, Germany.

Superconductor Science and Technology•Oct 18, 2007•38 citations

Reading out the state of a flux qubit by Josephson transmission line solitons

Arkady Fedorov, Alexander Shnirman, Gerd Schön +1 more

We describe the readout process of the state of a Josephson flux qubit via solitons in Josephson transmission lines (JTLs) as they are in use in the standard rapid single flux quantum technology. We consider the situation where the information about the state of the qubit is stored in the time delay of the soliton. We analyze dissipative underdamped JTLs, take into account their jitter, and provide estimates of the measuring time and efficiency of the measurement for relevant experimental parameters.

arXiv:cond-mat/0611680•Physical Review B•Jun 7, 2007•48 citations

Fluxon interaction in an overdamped Josephson transmission line

V. K. Kaplunenko

We have simulated fluxon propagation within a Josephson transmission line that is one of the elements of a rapid single flux quantum (RSFQ) circuit. This line is a parallel connection of damped Josephson junctions coupled by superconducting inductances. Geometries with and without mutual inductances between neighboring cells are considered. If the time interval between two fluxons is less than 0.3 φ0Vc−1 (Vc characteristic voltage) a repulsion between them was observed. The repulsion sets a specific time delay between the fluxons that impose a rigid limitation for high frequency performance of RSFQ logic. The delay depends on the shunting parameter, bias current, and values of interconnecting inductances.

Applied Physics Letters•Jun 12, 1995•48 citations

Propagation of short current pulses in Josephson transition line and ultrafast qubit control

M. V. Bastrakova, N. V. Klenov, Vsevolod I. Ruzhickiy +1 more

Abstract The results of the study of the impact of single-quantum magnetic flux pulses moving along the Josephson transmission lines (JTL) on the dynamics of states of qubits magnetically coupled with such lines are presented. The JTL dynamics was calculated in the frame of resistively shunted junction model with different damping coefficients. This allowed us to find the form of control current pulses (fluxon) acting on a superconducting qubit. Numerical simulations of the simplest logic operations with superconducting qubit due to calculated fluxon impact are presented.

Journal of Physics Conference Series•Dec 1, 2019•1 citation

Interfacing Superconducting Qubits With Cryogenic Logic: Readout

Caleb Howington, Alex Opremcak, R. McDermott +3 more

As superconducting quantum processors increase in size and complexity, the scalability of standard techniques for qubit control and readout becomes a limiting factor. Replacing room temperature analog components with cryogenic digital components could allow for the realization of systems well beyond the current state-of-the-art qubit arrays with tens of qubits. The standard technique for performing a qubit measurement with heterodyne readout uses a quantum-limited cryogenic amplifier chain and requires bulky microwave components inside the refrigerator with multiple control lines and pump signals. Additionally, the result is only accessible in software at room temperature. An alternative method for measuring qubits involves mapping the qubit state onto the photon occupation in a microwave cavity, followed by subsequent photon detection using a Josephson photomultiplier (JPM). The JPM measures the qubit and stores the result in a classical circulating current. To make use of this result, we can leverage existing single flux quantum (SFQ) circuitry. An underdamped Josephson transmission line (JTL) can be coupled to the JPM and fluxons traveling along the JTL are accelerated or delayed, depending on the circulating current state of the JPM. This fluxon delay can then be converted to an SFQ logic signal resulting in a digital qubit readout with a proximal microfabricated device, paving the way for cryogenic digital feedback necessary for error-correcting codes.

IEEE Transactions on Applied Superconductivity•Apr 2, 2019•32 citations

The road to long coherence time superconducting quantum bits

Dongning Zheng, Yirong Jin

Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.

Chinese Science Bulletin (Chinese Version)•Sep 27, 2017•2 citations
We theoretically investigate a readout scheme of the quantum state of a superconducting qubit based on time delay of a single flux quantum (SFQ), also known as a fluxon, propagating in a Josephson transmission line (JTL). We concretely study the time-delay readout based on capacitive coupling between a transmon qubit and a JTL, and we evaluate the time delay depending on the qubit state. We also reveal a feature of the absence of fluxon pinning and exponential suppression of nonadiabatic transitions caused by the propagating fluxon, which is advantageous for the time-delay readout. We extend the analysis to a multi-level transmon as well. Owing to the spectral gap in the JTL, the radiative decay of the qubit mediated by the JTL is exponentially suppressed, and thus the transmission line itself also serves as a filter protecting the qubit. The readout scheme requires neither complicated wiring to low-temperature stages nor bulky microwave components, which are bottlenecks for integration of a large-scale superconducting quantum computer.
A detailed design is given for a flux qubit readout using ballistic fluxons. In this scheme, fluxons propagate through an underdamped Josephson transmission line (JTL) coupled to the qubit, whose state affects the fluxon propagation time. For strong qubit–JTL coupling, and far from the symmetry point, a qubit can be measured with fidelity greater than 99% and measurement time of 4 ns. The readout circuit requires additional rapid single flux quantum (RSFQ) interface circuitry to launch and receive the delayed flux solitons. The parameters of this driver and receiver have been optimized to produce low fluxon speed at launch and impedance matching at the receiver. The delayed solitons are compared to a reference line using a detector with time resolution of better than 16 ps. Both the JTL and RSFQ interface were designed for the Nb 30 A cm −2 process developed at VTT, Finland, with postdeposition of the Al qubit at IPHT, Germany.
We describe the readout process of the state of a Josephson flux qubit via solitons in Josephson transmission lines (JTLs) as they are in use in the standard rapid single flux quantum technology. We consider the situation where the information about the state of the qubit is stored in the time delay of the soliton. We analyze dissipative underdamped JTLs, take into account their jitter, and provide estimates of the measuring time and efficiency of the measurement for relevant experimental parameters.
We have simulated fluxon propagation within a Josephson transmission line that is one of the elements of a rapid single flux quantum (RSFQ) circuit. This line is a parallel connection of damped Josephson junctions coupled by superconducting inductances. Geometries with and without mutual inductances between neighboring cells are considered. If the time interval between two fluxons is less than 0.3 φ0Vc−1 (Vc characteristic voltage) a repulsion between them was observed. The repulsion sets a specific time delay between the fluxons that impose a rigid limitation for high frequency performance of RSFQ logic. The delay depends on the shunting parameter, bias current, and values of interconnecting inductances.
Abstract The results of the study of the impact of single-quantum magnetic flux pulses moving along the Josephson transmission lines (JTL) on the dynamics of states of qubits magnetically coupled with such lines are presented. The JTL dynamics was calculated in the frame of resistively shunted junction model with different damping coefficients. This allowed us to find the form of control current pulses (fluxon) acting on a superconducting qubit. Numerical simulations of the simplest logic operations with superconducting qubit due to calculated fluxon impact are presented.
As superconducting quantum processors increase in size and complexity, the scalability of standard techniques for qubit control and readout becomes a limiting factor. Replacing room temperature analog components with cryogenic digital components could allow for the realization of systems well beyond the current state-of-the-art qubit arrays with tens of qubits. The standard technique for performing a qubit measurement with heterodyne readout uses a quantum-limited cryogenic amplifier chain and requires bulky microwave components inside the refrigerator with multiple control lines and pump signals. Additionally, the result is only accessible in software at room temperature. An alternative method for measuring qubits involves mapping the qubit state onto the photon occupation in a microwave cavity, followed by subsequent photon detection using a Josephson photomultiplier (JPM). The JPM measures the qubit and stores the result in a classical circulating current. To make use of this result, we can leverage existing single flux quantum (SFQ) circuitry. An underdamped Josephson transmission line (JTL) can be coupled to the JPM and fluxons traveling along the JTL are accelerated or delayed, depending on the circulating current state of the JPM. This fluxon delay can then be converted to an SFQ logic signal resulting in a digital qubit readout with a proximal microfabricated device, paving the way for cryogenic digital feedback necessary for error-correcting codes.
Superconducting quantum computing is a solid state quantum computing technology based on Josephson junction circuits. It becomes one of the most promising candidates for realizing practical quantum computer/simulator, because of its scalability, easy to coupling and control, compatibility to semiconductor technologies, etc. As the complicated electromagnetic environment in solid state metal and insulator, superconducting quantum bits (qubits) suffered from shot coherence time since its early development. In this review, we described some recently developed superconducting qubit structures, including Transmon/Xmon, Fluxonium and C-shunt flux qubit. Although these new qubit structures have very different circuit parameters and energy scales, they all find their way to effectively suppress environmental noises. As a result, their coherence time were improved significantly. Transmon, a transmission-line shunted plasma oscillation qubit, was now among the most popular structures for building a multi-qubit superconducting quantum circuit. It introduced a relatively large shunt capacitor to remarkably reduce the charge dispersion. Although the non-linearity is also decreased, by operating in a properly chosen EJ/Ec, transmon can greatly reduce the charge noise while only sacrificing a small amount of non-linearity. Xmon can be considered as a modified version of transmon. It is designed and optimized for multi-qubit operation and measurement with separate X/Y and Z control lines for each qubit, and a readout bus (a transmission line or a low-Q bandpass filter) for simultaneous readout of all the qubits. Fluxonium provide another solution for suppressing the charge noise in Cooper-pair box (CPB). It introduces a large shunt inductance to filter low-frequency offset charge in the small capacitor of the phase-slip junction (the small junction). To keep the qubit operating in the charge region, the shunt inductor should be large enough to keep the impedance larger than the superconducting impedance quantum RQ~1 kΩ. As a result, the inductance can only be provided by a large series of Josephson junctions. Fluxonium keeps the advantage of high anharmonicity of CPB. In addition, it introduces another degree of freedom: external flux Φext. Quasiparticles (electrons or holes) tunneling at the small junction add coherently to produce a ″1+cosφ″ term. As a result, when Φext= Φ0/2, dissipation caused by quasiparticle tunneling is suppressed and the energy relaxation time (T1) increases drastically. C-shunt flux qubit (CSFQ) decreases α and EJ to suppress flux noise in the qubit. While the charge noise becomes the dominant noise source, a large shunt capacitor is added to suppress the charge noise, similar to that in a transmon qubit. It is worth to notice that in CSFQ, the α decreases to below but near 1/2. As a result, the double-well potential no longer exists. The energy structure become similar to transmon, with the anharmonicity be opposite. CSFQ can get a much improved coherence time, while its anharmonicity can be larger than that of transmon. Those new superconducting qubit structures provide different solutions to improve the coherence time. Although it looks much different in circuit models and parameters, they have ideas in common, and may act as guides to other novel designs with longer coherence time. We can summarize as below. (1) The qubit circuit should be free of small superconducting islands. Charge fluctuation in small islands is a major source of decoherence. As a result, increase the area of the islands, that is, increase the capacitance becomes a straight forward way to suppress the charge noise. In Fluxonium, the small junction is connected with a large series of large junctions that there is also no small islands in the whole loop. (2) Remove superconducting loops in the qubit circuit, or minimize the loop size and loop current to suppress flux noise. (3) Bias the phase difference of the small junction to π, where dissipation caused by quasiparticle tunneling can be suppressed coherently. (4) Decrease the coupling bandwidth of qubit to the environment. In a circuit-QED readout scheme, a high-Q readout resonator that dispersively coupled to the qubit protects the qubit from exposed to the electromagnetic environment of the readout circuit. A ″Purcell filter″ can also be added to suppress such decoherence further. In conclusion, we overviewed some qubit engineering techniques or ideas to improve the coherence time, which is a very important figure for building practical quantum computer/simulator. We hope that someone can combine and optimize these ideas, while interact with developments in materials and micro-fabrication technologies, to develop novel new generation superconducting qubit structures in the near future.