© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:2602.16370

Why the Casimir Force for Magnetic Metals Computed by the Lifshitz Theory Using the Drude Model Disagrees with the Measurement Data

G. L. Klimchitskaya, C. C. Korikov, V. M. Mostepanenko

quant-phcond-mat.mtrl-sciSubmitted Feb 18, 2026• Announced Feb 19, 2026

Abstract

We consider the Casimir force in configurations with magnetic metal plates and analyze the reasons why the predictions of the Lifshitz theory using the dielectric permittivity of the Drude model are inconsistent with the measurement data. For this purpose, the contributions of the electromagnetic waves with the transverse magnetic and transverse electric polarizations to the Casimir force are computed using the Lifshitz theory expressed in terms of the pure imaginary Matsubara frequencies. Furthermore, the fractions of the evanescent and propagating waves in these contributions are found using an equivalent formulation of the Lifshitz theory along the real frequency axis. All computations are performed for Au-Ni and Ni-Ni plates using the Drude model and the experimentally consistent plasma model over the separation region from 0.5 to 6~mum, where the total force value is determined by conduction electrons. It is shown that the transverse magnetic contribution to the Casimir force does not depend on the used model of the dielectric permittivity, so that the total difference between the predictions of the Lifshitz theory using the Drude model and the measurement data is determined by the transverse electric contribution. In doing so, as opposed to the case of nonmagnetic metals, both fractions of the evanescent and propagating waves in this contribution depend on the model of the dielectric permittivity used in computations, whereas the magnetic properties of the plate metal influence the Casimir force solely through the fraction of propagating waves in the transverse electric contribution. The issue of a more adequate theoretical description of the electromagnetic response of magnetic metals is discussed.

Comments: 16 pages, 9 figures; Physics, to appear

Related papers

On Casimir force between two real metallic plates

Michael V. Davidovich

The corrections to Casimir pressure (force) on two plates of real metal described by the dielectric constant of the Drude, Drude-Lorentz, Drude-Smith and plasma models at the finite temperature and conductivity are considered. We consider the contour integral lost in the Lifshitz formula and discuss inconsistencies for the corrections to the Casimir force given in the literature. Numerical and analytical results in the near and far zones are presented. The two first-order correction obtained due to the actual dielectric constant of the metal coincided with the literature data.

quant-pharXiv:2608.16619•Aug 18, 2026

Casimir force between plane-layered structures: van Kampen-Schram approach for finite temperature

Michael V. Davidovich

Based on the van Kampen-Schram method, a formula for the Casimir force between two plane-layered structures is obtained, which includes the sum of the Matsubara frequencies and a contour integral. It is shown that the contour integral is not taken into account in the Lifshitz formula. Taking it into account gives a small contribution at high temperatures when the Lifshitz formula is approximately correct. However, at low temperatures, its contribution is significant, and the Lifshitz formula for the finite temperature does not transform into the Lifshitz formula at zero temperature. An example of interaction of metal plates is considered.1

quant-pharXiv:2608.16567•Aug 18, 2026

Casimir force screening by a quantum Boltzmann plasma

Petr Brandyshev, Maksim Koniushenko, Yury Budkov

We develop a finite-temperature field-theoretical description of the Casimir interaction between two perfectly conducting boundaries with the intervening gap filled by a two-component quantum Boltzmann plasma embedded in a homogeneous dielectric background. The quantum motion of the charged particles is represented by imaginary-time worldlines, while the electromagnetic field is treated in the Gaussian approximation. The resulting partition function contains distinct longitudinal and transverse response contributions and an additional quantum-induced source term with no classical counterpart. In the classical limit the theory reduces to the usual Casimir-screening picture: the static longitudinal mode is Debye screened, whereas the transverse electromagnetic sector is unaffected by classical mobile charges. Finite thermal de Broglie wavelengths modify the nonzero Matsubara response and produce the leading quantum correction to the force. In the static long-wavelength limit, the longitudinal dielectric function has, through the leading quantum correction, the same expansion structure as the Lindhard response of a degenerate electron gas under the correspondence $k_{TF}\leftrightarrowκ_D$ and $k_F\leftrightarrowλ_{dB}^{-1}$, while the static transverse response reproduces the leading high-temperature Landau orbital diamagnetic susceptibility.

quant-pharXiv:2610.06202•Oct 6, 2026

Casimir-force spectroscopy of broadband optical response

Calum F. Shelden, Jeremy N. Munday

Broadband optical response governs light-matter interactions across photonics, plasmonics, thermal radiation, and quantum fluctuation electrodynamics, yet determining a continuous dielectric function over many decades in frequency typically requires combining multiple spectroscopies, extrapolations, and material models. Here we show that quantum-fluctuation forces provide a route to broadband optical characterization. Casimir interactions depend on the dielectric response of materials across the electromagnetic spectrum, but this information is encoded through Lifshitz theory in a spectrally weighted and nontrivial way. By training physics-constrained supervised learning models on synthetic dielectric spectra and their corresponding Casimir force curves, we invert this relationship and constrain the complex permittivity of materials over more than seven orders of magnitude in frequency and provide an estimate of their values from force-distance data. The reconstruction reveals a direct separation-frequency correspondence: large separations constrain the free-carrier response, whereas shorter separations encode higher-frequency resonant structure. Applying the method to measured force gradients identifies the current experimental limits imposed by measurement noise, restricted separation range, and model complexity. These results establish fluctuation-induced forces as a spectrally weighted route to broadband optical characterization and define the experimental and physical limits that govern what spectral information is accessible from near-field quantum electromagnetic measurements.

quant-pharXiv:2601.10118•Jan 16, 2026

The Casimir free energy of peptide films on a silicon substrate: Impact of dielectric-to-metal transition in silicon and nanoparticles in peptide

G. L. Klimchitskaya, V. M. Mostepanenko

Using the Lifshitz theory of the van der Waals and Casimir forces, we calculate the Casimir free energy of thin peptide films deposited on silicon substrates. The Casimir free energy is found as a function of film thickness for different fractions of water in the film, in the presence of either nonmagnetic or magnetic nanoparticles, and under the impact of irradiation of a silicon substrate with laser pulses or dopants resulting in the dielectric-to-metal phase transition. It is shown that for a dielectric silicon there is the borderline value of the film thickness, such that the Casimir free energy is negative and contributes to the film stability for thicker films, but is positive and makes the film less stable for thinner ones. According to our results, the borderline value of peptide film thickness decreases with increasing volume fractions of water and in the film. This decrease is more pronounced for the magnetic nanoparticles and becomes stronger with increasing their radius. The borderline value of peptide film thickness is found as a function of the fraction of water in the film. If the silicon substrate is in metallic state, the Casimir free energy of peptide coating is always positive, which makes it less stable. Possible applications of the obtained results in organic electronics and biomedicine are discussed.

cond-mat.mes-hallCross-listedarXiv:2609.03841•Sep 4, 2026

Numerical evaluation of Casimir forces using the discontinuous Galerkin time-domain method

Carles Martí Farràs, Bettina Beverungen, Philip Trøst Kristensen +2 more

We present a time-domain scheme for computing Casimir forces within the Maxwell stress tensor formalism, together with a specific realization using the finite-element-based discontinuous Galerkin time-domain method. The approach enables accurate evaluation of Casimir--Lifshitz interactions for a wide range of geometries and material properties at finite temperature. At the core of the method, the electromagnetic Green's tensor is expressed as the system's response to dipolar excitations, thereby recasting the Maxwell stress tensor into a set of classical scattering problems driven by electric and magnetic dipoles. We validate the approach against reference calculations of the Casimir interaction between parallel half-spaces at both zero and nonzero temperature. We further demonstrate its applicability to finite, cylindrically symmetric geometries for which closed-form solutions are unavailable, obtaining accurate agreement with asymptotic predictions based on physical considerations. These findings illustrate the method's potential for studying Casimir interactions in realistic micro- and nanoscale structures, relevant to nanodevice design and experimental settings.

quant-pharXiv:2603.03888•Mar 5, 2026

We consider the Casimir force in configurations with magnetic metal plates and analyze the reasons why the predictions of the Lifshitz theory using the dielectric permittivity of the Drude model are inconsistent with the measurement data. For this purpose, the contributions of the electromagnetic waves with the transverse magnetic and transverse electric polarizations to the Casimir force are computed using the Lifshitz theory expressed in terms of the pure imaginary Matsubara frequencies. Furthermore, the fractions of the evanescent and propagating waves in these contributions are found using an equivalent formulation of the Lifshitz theory along the real frequency axis. All computations are performed for Au-Ni and Ni-Ni plates using the Drude model and the experimentally consistent plasma model over the separation region from 0.5 to 6~mum, where the total force value is determined by conduction electrons. It is shown that the transverse magnetic contribution to the Casimir force does not depend on the used model of the dielectric permittivity, so that the total difference between the predictions of the Lifshitz theory using the Drude model and the measurement data is determined by the transverse electric contribution. In doing so, as opposed to the case of nonmagnetic metals, both fractions of the evanescent and propagating waves in this contribution depend on the model of the dielectric permittivity used in computations, whereas the magnetic properties of the plate metal influence the Casimir force solely through the fraction of propagating waves in the transverse electric contribution. The issue of a more adequate theoretical description of the electromagnetic response of magnetic metals is discussed.

The corrections to Casimir pressure (force) on two plates of real metal described by the dielectric constant of the Drude, Drude-Lorentz, Drude-Smith and plasma models at the finite temperature and conductivity are considered. We consider the contour integral lost in the Lifshitz formula and discuss inconsistencies for the corrections to the Casimir force given in the literature. Numerical and analytical results in the near and far zones are presented. The two first-order correction obtained due to the actual dielectric constant of the metal coincided with the literature data.

Based on the van Kampen-Schram method, a formula for the Casimir force between two plane-layered structures is obtained, which includes the sum of the Matsubara frequencies and a contour integral. It is shown that the contour integral is not taken into account in the Lifshitz formula. Taking it into account gives a small contribution at high temperatures when the Lifshitz formula is approximately correct. However, at low temperatures, its contribution is significant, and the Lifshitz formula for the finite temperature does not transform into the Lifshitz formula at zero temperature. An example of interaction of metal plates is considered.1

We develop a finite-temperature field-theoretical description of the Casimir interaction between two perfectly conducting boundaries with the intervening gap filled by a two-component quantum Boltzmann plasma embedded in a homogeneous dielectric background. The quantum motion of the charged particles is represented by imaginary-time worldlines, while the electromagnetic field is treated in the Gaussian approximation. The resulting partition function contains distinct longitudinal and transverse response contributions and an additional quantum-induced source term with no classical counterpart. In the classical limit the theory reduces to the usual Casimir-screening picture: the static longitudinal mode is Debye screened, whereas the transverse electromagnetic sector is unaffected by classical mobile charges. Finite thermal de Broglie wavelengths modify the nonzero Matsubara response and produce the leading quantum correction to the force. In the static long-wavelength limit, the longitudinal dielectric function has, through the leading quantum correction, the same expansion structure as the Lindhard response of a degenerate electron gas under the correspondence

k_{TF}\leftrightarrowκ_D

and

k_F\leftrightarrowλ_{dB}^{-1}

, while the static transverse response reproduces the leading high-temperature Landau orbital diamagnetic susceptibility.

Broadband optical response governs light-matter interactions across photonics, plasmonics, thermal radiation, and quantum fluctuation electrodynamics, yet determining a continuous dielectric function over many decades in frequency typically requires combining multiple spectroscopies, extrapolations, and material models. Here we show that quantum-fluctuation forces provide a route to broadband optical characterization. Casimir interactions depend on the dielectric response of materials across the electromagnetic spectrum, but this information is encoded through Lifshitz theory in a spectrally weighted and nontrivial way. By training physics-constrained supervised learning models on synthetic dielectric spectra and their corresponding Casimir force curves, we invert this relationship and constrain the complex permittivity of materials over more than seven orders of magnitude in frequency and provide an estimate of their values from force-distance data. The reconstruction reveals a direct separation-frequency correspondence: large separations constrain the free-carrier response, whereas shorter separations encode higher-frequency resonant structure. Applying the method to measured force gradients identifies the current experimental limits imposed by measurement noise, restricted separation range, and model complexity. These results establish fluctuation-induced forces as a spectrally weighted route to broadband optical characterization and define the experimental and physical limits that govern what spectral information is accessible from near-field quantum electromagnetic measurements.

Using the Lifshitz theory of the van der Waals and Casimir forces, we calculate the Casimir free energy of thin peptide films deposited on silicon substrates. The Casimir free energy is found as a function of film thickness for different fractions of water in the film, in the presence of either nonmagnetic or magnetic nanoparticles, and under the impact of irradiation of a silicon substrate with laser pulses or dopants resulting in the dielectric-to-metal phase transition. It is shown that for a dielectric silicon there is the borderline value of the film thickness, such that the Casimir free energy is negative and contributes to the film stability for thicker films, but is positive and makes the film less stable for thinner ones. According to our results, the borderline value of peptide film thickness decreases with increasing volume fractions of water and in the film. This decrease is more pronounced for the magnetic nanoparticles and becomes stronger with increasing their radius. The borderline value of peptide film thickness is found as a function of the fraction of water in the film. If the silicon substrate is in metallic state, the Casimir free energy of peptide coating is always positive, which makes it less stable. Possible applications of the obtained results in organic electronics and biomedicine are discussed.

We present a time-domain scheme for computing Casimir forces within the Maxwell stress tensor formalism, together with a specific realization using the finite-element-based discontinuous Galerkin time-domain method. The approach enables accurate evaluation of Casimir--Lifshitz interactions for a wide range of geometries and material properties at finite temperature. At the core of the method, the electromagnetic Green's tensor is expressed as the system's response to dipolar excitations, thereby recasting the Maxwell stress tensor into a set of classical scattering problems driven by electric and magnetic dipoles. We validate the approach against reference calculations of the Casimir interaction between parallel half-spaces at both zero and nonzero temperature. We further demonstrate its applicability to finite, cylindrically symmetric geometries for which closed-form solutions are unavailable, obtaining accurate agreement with asymptotic predictions based on physical considerations. These findings illustrate the method's potential for studying Casimir interactions in realistic micro- and nanoscale structures, relevant to nanodevice design and experimental settings.