Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2512.24273

Using NV centers in diamond to detect DC to very-low frequency magnetic fields

Valts Krumins, Ivars Krastins, Oskars Rudzitis, Reinis Lazda, Florian Gahbauer, Marcis Auzinsh

quant-phphysics.app-phSubmitted Dec 30, 2025• Announced Dec 31, 2025
arXivHTMLPDF

Abstract

In this work we present a compact and portable tabletop magnetometer that utilizes negatively charged nitrogen-vacancy (NV) centers in diamond. The magnetometer is operated using a dual microwave resonance detection approach in combination with an optically detected magnetic resonance (ODMR) technique (mitigating drifts in results due to changes of the diamond temperature), capable of simultaneously exciting and registering two ODMR transitions. The experimentally measured magnetic field noise-floor is $\approx 2.3~\textrm{nT}\sqrt{\textrm{Hz}}$ while the calculated shot-noise-limited magnetic field sensitivity is $\approx 585~\textrm{pT}\sqrt{\textrm{Hz}}$ when excited with a continuous wave laser at 0.5~W. These results pave the way for realizing a simple set-up magnetometer for precise single axis magnetic field measurements for example for accurate electric current measurements for stabilization purposes and magnetic communication applications.

Related papers

A robust laser cavity platform for NV-diamond singlet infrared absorption magnetometry

Shao Qi Lim, Alexander A. Wood, Brett C. Johnson +9 more

The negatively charged nitrogen-vacancy center (NV$^-$) in diamond is a versatile platform for quantum magnetometry under ambient conditions. Recently, laser threshold magnetometry (LTM) has been proposed as a means to significantly enhance the sensitivity of NV-based magnetometers by incorporating a diamond hosting NV$^-$ centers within a laser cavity and operating near threshold. While demonstrations have validated the concept, practical implementations remain technically demanding, requiring high pump powers and precise alignment of free-space cavities. It remains unclear whether the benefits of operating near threshold will outpace increased laser noise. In this work, we integrate an NV-diamond with a high NV$^-$ content into a compact external cavity diode laser and demonstrate singlet infrared absorption optically detected magnetic resonance (ODMR). The system exhibits exceptional threshold current stability, enabling ODMR using the threshold current as the read-out parameter. We report a five-fold enhancement in the ODMR contrast by operating near threshold. The best magnetic field sensitivity of $7.6~\mathrm{nT/\sqrt{Hz}}$ (DC-500 Hz) is achieved well above threshold, while near threshold sensitivity is limited by increased probe laser noise. These results establish a compact and mechanically robust platform for singlet absorption-based NV$^-$ magnetometry and highlight key trade-offs between contrast enhancement and laser noise near threshold.

quant-pharXiv:2604.18937•Apr 22, 2026•0 citations

Compact and portable pulsed measurement module using diamond NV centers

Hiroshige Deguchi, Tsukasa Hayashi, Hiroya Saito +6 more

Abstract We developed a compact, portable quantum sensor module for pulsed measurements using diamond nitrogen-vacancy (NV) centers, an excitation laser diode of 3 mW and a microwave source of 15 dBm. This module allowed the evaluation of ensemble diamond NV centers for measuring magnetic fields by continuous wave— optically detected magnetic resonance (ODMR), Rabi oscillation, pulsed ODMR, Ramsey measurement and spin-echo measurement. The sensitivity through pulsed measurements reached 40 nT/ Hz at 1 Hz, which achieved higher sensitivity by one order, especially at a frequency around 1 Hz compared with previously reported compact modules using diamond NV centers.

Japanese Journal of Applied Physics•Jun 27, 2025•2 citations

Towards high-sensitivity magnetometry with nitrogen-vacancy centers in diamond using the singlet infrared absorption

Ali Tayefeh Younesi, Muhib Omar, Arne Wickenbrock +2 more

The negatively charged nitrogen vacancy center in diamond is widely used for quantum sensing due to the sensitivity of the spin triplet in the electronic ground state to external perturbations such as strain and electromagnetic fields, which makes it an excellent probe for changes in these perturbations. The spin state can be measured through optically detected magnetic resonance, which is most commonly achieved by detecting the photoluminescence after exciting the spin-triplet transition. Recently, methods have been proposed and demonstrated that use the absorption of the infrared singlet transition at 1042 nm instead. These methods, however, require cryogenic temperatures or external cavities to enhance the absorption signal. Here, we report on our efforts to optimize the magnetometer sensitivity at room temperature and without cavities. We reach a sensitivity of 18 pT / Hz , surpassing previously reported values, and a calculated shot-noise limit of 5 pT / Hz . We also report on a defect that is native to diamond grown by chemical vapor deposition and thus absent in high-pressure high-temperature diamond, the excitation of which impacts the measured singlet absorption signal.

arXiv:2410.20876•Physical Review Applied•May 7, 2025•13 citations

Broadband AC Magnetic Field Sensing via Continuous wave optically detected magnetic resonance with NV Centers in diamond

Ryohei Dokai, Ryusei Okaniwa, Miku Ishizaki +2 more

The nitrogen-vacancy (NV) center in diamond has attracted considerable attention as a highly sensitive quantum sensor that can operate at room temperature. In particular, continuous-wave optically detected magnetic resonance (CW-ODMR) is promising for a wide range of applications because of its simplicity. However, conventional AC magnetic-field sensing schemes based on CW-ODMR suffer from a limited detection bandwidth: the detectable frequency is either fixed by intrinsic physical parameters of the NV center or, even when tunable, restricted to a narrow range of only a few MHz. Here, we propose a broadband AC magnetometry scheme based on CW-ODMR with NV centers using microwave-driven dressed states.Through theoretical analysis and numerical simulations, we show that the proposed scheme enables the detection of AC magnetic fields with frequencies up to the order of 100 MHz, which has been difficult to achieve using conventional CW-ODMR-based methods.

quant-pharXiv:2606.05928•Japanese Journal of Applied Physics•Jun 5, 2026•0 citations

Towards high-sensitivity magnetometry with nitrogen-vacancy centers in diamond using the singlet infrared absorption

Tayefeh Younesi, Ali, Omar, Muhib, Arne Wickenbrock +2 more

The negatively charged nitrogen vacancy center in diamond is widely used for quantum sensing due to the sensitivity of the spin triplet in the electronic ground state to external perturbations such as strain and electromagnetic fields, which makes it an excellent probe for changes in these perturbations.The spin state can be measured through optically detected magnetic resonance, which is most commonly achieved by detecting the photoluminescence after exciting the spin-triplet transition.Recently, methods have been proposed and demonstrated that use the absorption of the infrared singlet transition at 1042 nm instead.These methods, however, require cryogenic temperatures or external cavities to enhance the absorption signal.Here, we report on our efforts to optimize the magnetometer sensitivity at room temperature and without cavities.We reach a sensitivity of 18 pT/ √ Hz, surpassing previously reported values, and a calculated shot-noise limit of 5 pT/ √ Hz .We also report on a defect that is native to diamond grown by chemical vapor deposition and thus absent in high-pressure high-temperature diamond, the excitation of which impacts the measured singlet absorption signal.

Physical Review Applied•Jan 1, 2025•0 citations

High Field Diamond Magnetometry Towards Tokamak Diagnostics

S. M. Graham, C. J. Stephen, A. J. Newman +3 more

Nitrogen vacancy centres (NVC) in diamond have been widely used for near-dc magnetometry. The intrinsic properties of diamonds make them potential candidates for tokamak fusion power diagnostics, where radiation-hard magnetometers will be essential for efficient control. An NVC magnetometer placed in a tokamak will need to operate within a $\geq$ 1 T magnetic field. In this work, we demonstrate fibre-coupled ensemble NVC optically detected magnetic resonance (ODMR) and magnetometry measurements at magnetic fields up to 1.2 T. Sensitivities of approximately 240 to 600 nT/$\sqrt{\textrm{Hz}}$ and 110 nT/$\sqrt{\textrm{Hz}}$ are achieved in a (10-150) Hz frequency range, for non-degenerate and near-$\langle$111$\rangle$ field alignments respectively.

physics.app-phCross-listedarXiv:2601.13413•Jan 21, 2026
In this work we present a compact and portable tabletop magnetometer that utilizes negatively charged nitrogen-vacancy (NV) centers in diamond. The magnetometer is operated using a dual microwave resonance detection approach in combination with an optically detected magnetic resonance (ODMR) technique (mitigating drifts in results due to changes of the diamond temperature), capable of simultaneously exciting and registering two ODMR transitions. The experimentally measured magnetic field noise-floor is ≈2.3 nTHz\approx 2.3~\textrm{nT}\sqrt{\textrm{Hz}}≈2.3 nTHz​ while the calculated shot-noise-limited magnetic field sensitivity is ≈585 pTHz\approx 585~\textrm{pT}\sqrt{\textrm{Hz}}≈585 pTHz​ when excited with a continuous wave laser at 0.5~W.
These results pave the way for realizing a simple set-up magnetometer for precise single axis magnetic field measurements for example for accurate electric current measurements for stabilization purposes and magnetic communication applications.
The negatively charged nitrogen-vacancy center (NV−^-−) in diamond is a versatile platform for quantum magnetometry under ambient conditions. Recently, laser threshold magnetometry (LTM) has been proposed as a means to significantly enhance the sensitivity of NV-based magnetometers by incorporating a diamond hosting NV−^-− centers within a laser cavity and operating near threshold. While demonstrations have validated the concept, practical implementations remain technically demanding, requiring high pump powers and precise alignment of free-space cavities. It remains unclear whether the benefits of operating near threshold will outpace increased laser noise. In this work, we integrate an NV-diamond with a high NV−^-− content into a compact external cavity diode laser and demonstrate singlet infrared absorption optically detected magnetic resonance (ODMR). The system exhibits exceptional threshold current stability, enabling ODMR using the threshold current as the read-out parameter. We report a five-fold enhancement in the ODMR contrast by operating near threshold. The best magnetic field sensitivity of 7.6 nT/Hz7.6~\mathrm{nT/\sqrt{Hz}}7.6 nT/Hz​ (DC-500 Hz) is achieved well above threshold, while near threshold sensitivity is limited by increased probe laser noise. These results establish a compact and mechanically robust platform for singlet absorption-based NV−^-− magnetometry and highlight key trade-offs between contrast enhancement and laser noise near threshold.
Abstract We developed a compact, portable quantum sensor module for pulsed measurements using diamond nitrogen-vacancy (NV) centers, an excitation laser diode of 3 mW and a microwave source of 15 dBm. This module allowed the evaluation of ensemble diamond NV centers for measuring magnetic fields by continuous wave— optically detected magnetic resonance (ODMR), Rabi oscillation, pulsed ODMR, Ramsey measurement and spin-echo measurement. The sensitivity through pulsed measurements reached 40 nT/ Hz at 1 Hz, which achieved higher sensitivity by one order, especially at a frequency around 1 Hz compared with previously reported compact modules using diamond NV centers.
The negatively charged nitrogen vacancy center in diamond is widely used for quantum sensing due to the sensitivity of the spin triplet in the electronic ground state to external perturbations such as strain and electromagnetic fields, which makes it an excellent probe for changes in these perturbations. The spin state can be measured through optically detected magnetic resonance, which is most commonly achieved by detecting the photoluminescence after exciting the spin-triplet transition. Recently, methods have been proposed and demonstrated that use the absorption of the infrared singlet transition at 1042 nm instead. These methods, however, require cryogenic temperatures or external cavities to enhance the absorption signal. Here, we report on our efforts to optimize the magnetometer sensitivity at room temperature and without cavities. We reach a sensitivity of 18 pT / Hz , surpassing previously reported values, and a calculated shot-noise limit of 5 pT / Hz . We also report on a defect that is native to diamond grown by chemical vapor deposition and thus absent in high-pressure high-temperature diamond, the excitation of which impacts the measured singlet absorption signal.
The nitrogen-vacancy (NV) center in diamond has attracted considerable attention as a highly sensitive quantum sensor that can operate at room temperature. In particular, continuous-wave optically detected magnetic resonance (CW-ODMR) is promising for a wide range of applications because of its simplicity. However, conventional AC magnetic-field sensing schemes based on CW-ODMR suffer from a limited detection bandwidth: the detectable frequency is either fixed by intrinsic physical parameters of the NV center or, even when tunable, restricted to a narrow range of only a few MHz. Here, we propose a broadband AC magnetometry scheme based on CW-ODMR with NV centers using microwave-driven dressed states.Through theoretical analysis and numerical simulations, we show that the proposed scheme enables the detection of AC magnetic fields with frequencies up to the order of 100 MHz, which has been difficult to achieve using conventional CW-ODMR-based methods.
The negatively charged nitrogen vacancy center in diamond is widely used for quantum sensing due to the sensitivity of the spin triplet in the electronic ground state to external perturbations such as strain and electromagnetic fields, which makes it an excellent probe for changes in these perturbations.The spin state can be measured through optically detected magnetic resonance, which is most commonly achieved by detecting the photoluminescence after exciting the spin-triplet transition.Recently, methods have been proposed and demonstrated that use the absorption of the infrared singlet transition at 1042 nm instead.These methods, however, require cryogenic temperatures or external cavities to enhance the absorption signal.Here, we report on our efforts to optimize the magnetometer sensitivity at room temperature and without cavities.We reach a sensitivity of 18 pT/ √ Hz, surpassing previously reported values, and a calculated shot-noise limit of 5 pT/ √ Hz .We also report on a defect that is native to diamond grown by chemical vapor deposition and thus absent in high-pressure high-temperature diamond, the excitation of which impacts the measured singlet absorption signal.
Nitrogen vacancy centres (NVC) in diamond have been widely used for near-dc magnetometry. The intrinsic properties of diamonds make them potential candidates for tokamak fusion power diagnostics, where radiation-hard magnetometers will be essential for efficient control. An NVC magnetometer placed in a tokamak will need to operate within a ≥\geq≥ 1 T magnetic field. In this work, we demonstrate fibre-coupled ensemble NVC optically detected magnetic resonance (ODMR) and magnetometry measurements at magnetic fields up to 1.2 T. Sensitivities of approximately 240 to 600 nT/Hz\sqrt{\textrm{Hz}}Hz​ and 110 nT/Hz\sqrt{\textrm{Hz}}Hz​ are achieved in a (10-150) Hz frequency range, for non-degenerate and near-$\langle111111111\rangle$ field alignments respectively.