Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2511.19128 · Physical Review Research

Dispersive detection of single microwave photons with quantum dots

Stephanie Matern, Alberto Biella, Pasquale Scarlino, Iacopo Carusotto, Gianluca Rastelli

Published Jun 8, 2026• 0 citations
arXivHTMLPDF

Abstract

Within a circuit quantum electrodynamics architecture, we theoretically investigate the detection of a single propagating microwave photon traveling through a resonant microwave cavity dispersively interacting with a double quantum dot tunnel coupled to a lead. Under suitable conditions, a single photon in the cavity can induce a measurable change in the electronic occupation of the charge states. We develop a quantum cascade approach that enables a time-resolved description of a single-photon wave packet impinging on the cavity. We make use of a simple model of charge detector to assess the efficiency of our photo-detection configuration as functions of key parameters such as coupling strength, tunneling rate, temperature, and photon resonance linewidth. We finally highlight a measurement-induced backaction effect on the cavity mode associated with the dispersive, nonabsorptive detection process.

DOI
10.1103/4dmz-t4c3

Related papers

Tunable high-efficiency microwave photon detector based on a double quantum dot coupled to a superconducting high-impedance cavity

Fabian Oppliger, Wonjin Jang, Aldo Tarascio +6 more

High-efficiency single-photon detection in the microwave domain is a key enabling technology for various quantum applications. However, the extremely low energy of microwave photons presents a fundamental challenge, preventing direct photon-to-charge conversion as achieved in optical systems using semiconductors. Here, we demonstrate continuous microwave photon detection with an efficiency approaching 70% in the single-photon regime. We use a hybrid system comprising a gate-defined double quantum dot (DQD) charge qubit in a gallium arsenide/aluminum gallium arsenide heterostructure, coupled to a high-impedance Josephson junction array cavity. We systematically optimize the hybrid architecture to maximize the detection efficiency by leveraging strong charge-photon coupling, tunable DQD tunnel rates, and the frequency tunability of both subsystems. The system efficiency is characterized over a frequency range of 3 to 5.2 gigahertz. Our results establish semiconductor-based cavity-quantum electrodynamics architectures as a scalable and versatile platform for efficient microwave photon detection, opening promising avenues for quantum microwave optics and quantum information technologies.

arXiv:2506.19828•Science Advances•Apr 3, 2026•4 citations

Tunable high-efficiency microwave photon detector based on a double quantum dot coupled to a superconducting high-impedance cavity

Fabian Oppliger, Wonjin Jang, Aldo Tarascio +6 more

High-efficiency single-photon detection in the microwave domain is a key enabling technology for various quantum applications. However, the extremely low energy of microwave photons presents a fundamental challenge, preventing direct photon-to-charge conversion as achieved in optical systems using semiconductors. Here, we demonstrate continuous microwave photon detection with an efficiency approaching 70% in the single-photon regime. We use a hybrid system comprising a gate-defined double quantum dot (DQD) charge qubit in a gallium arsenide/aluminum gallium arsenide heterostructure, coupled to a high-impedance Josephson junction array cavity. We systematically optimize the hybrid architecture to maximize the detection efficiency by leveraging strong charge-photon coupling, tunable DQD tunnel rates, and the frequency tunability of both subsystems. The system efficiency is characterized over a frequency range of 3 to 5.2 gigahertz. Our results establish semiconductor-based cavity-quantum electrodynamics architectures as a scalable and versatile platform for efficient microwave photon detection, opening promising avenues for quantum microwave optics and quantum information technologies.

•Apr 1, 2026•0 citations

Microwave Photon Detectors Based on Semiconducting Double Quantum Dots

Alberto Ghirri, Samuele Cornia, M. Affronte

Detectors of microwave photons find applications in different fields ranging from security to cosmology. Due to the intrinsic difficulties related to the detection of vanishingly small energy quanta ℏ ω , significant portions of the microwave electromagnetic spectrum are still uncovered by suitable techniques. No prevailing technology has clearly emerged yet, although different solutions have been tested in different contexts. Here, we focus on semiconductor quantum dots, which feature wide tunability by external gate voltages and scalability for large architectures. We discuss possible pathways for the development of microwave photon detectors based on photon-assisted tunneling in semiconducting double quantum dot circuits. In particular, we consider implementations based on either broadband transmission lines or resonant cavities, and we discuss how developments in charge sensing techniques and hybrid architectures may be beneficial for the development of efficient photon detectors in the microwave range.

Sensors•Jul 19, 2020•25 citations

Quantum efficiency of a single microwave photon detector based on a semiconductor double quantum dot

Clement H. Wong, Maxim Vavilov

Motivated by recent interest in implementing circuit quantum electrodynamics with semiconducting quantum dots, we consider a double quantum dot (DQD) capacitively coupled to a superconducting resonator that is driven by the microwave field of a superconducting transmission line. We analyze the DQD current response using input-output theory and show that the resonator-coupled DQD is a sensitive microwave single photon detector. Using currently available experimental parameters of DQD-resonator coupling and dissipation, including the effects of $1/f$ charge noise and phonon noise, we determine the parameter regime for which incident photons are completely absorbed and near-unit $\ensuremath{\gtrsim}98$% efficiency can be achieved. We show that this regime can be reached by using very high quality resonators with quality factor $Q\ensuremath{\simeq}{10}^{5}$.

arXiv:1512.06939•Physical Review A•Jan 24, 2017•46 citations

Single-electron double quantum dot dipole-coupled to a single photonic mode

J. Basset, David-Dominik Jarausch, Anna Stockklauser +6 more

We have realized a hybrid solid-state quantum device in which a single-electron semiconductor double quantum dot is dipole coupled to a superconducting microwave frequency transmission line resonator. The dipolar interaction between the two entities manifests itself via dispersive and dissipative effects observed as frequency shifts and linewidth broadenings of the photonic mode respectively. A Jaynes-Cummings Hamiltonian master equation calculation is used to model the combined system response and allows for determining both the coherence properties of the double quantum dot and its interdot tunnel coupling with high accuracy. The value and uncertainty of the tunnel coupling extracted from the microwave read-out technique are compared to a standard quantum point contact charge detection analysis. The two techniques are found to be consistent with a superior precision for the microwave experiment when tunneling rates approach the resonator eigenfrequency. Decoherence properties of the double dot are further investigated as a function of the number of electrons inside the dots. They are found to be similar in the single-electron and many-electron regimes suggesting that the density of the confinement energy spectrum plays a minor role in the decoherence rate of the system under investigation.

arXiv:1304.5141•Physical Review B•Sep 30, 2013•71 citations

Manipulation of a Single Charge in a Double Quantum Dot

J. R. Petta, Alex C. Johnson, Charles M. Marcus +2 more

We manipulate a single electron in a fully tunable double quantum dot using microwave excitation. Under resonant conditions, microwaves drive transitions between the (1,0) and (0,1) charge states of the double dot. Local quantum point contact charge detectors enable a direct measurement of the photon-induced change in occupancy of the charge states. From charge sensing measurements, we find T1 approximately 16 ns and a lower bound estimate for T*(2) of 400 ps for the charge two-level system.

arXiv:cond-mat/0408139•Physical Review Letters•Oct 27, 2004•430 citations
Within a circuit quantum electrodynamics architecture, we theoretically investigate the detection of a single propagating microwave photon traveling through a resonant microwave cavity dispersively interacting with a double quantum dot tunnel coupled to a lead. Under suitable conditions, a single photon in the cavity can induce a measurable change in the electronic occupation of the charge states. We develop a quantum cascade approach that enables a time-resolved description of a single-photon wave packet impinging on the cavity. We make use of a simple model of charge detector to assess the efficiency of our photo-detection configuration as functions of key parameters such as coupling strength, tunneling rate, temperature, and photon resonance linewidth. We finally highlight a measurement-induced backaction effect on the cavity mode associated with the dispersive, nonabsorptive detection process.
High-efficiency single-photon detection in the microwave domain is a key enabling technology for various quantum applications. However, the extremely low energy of microwave photons presents a fundamental challenge, preventing direct photon-to-charge conversion as achieved in optical systems using semiconductors. Here, we demonstrate continuous microwave photon detection with an efficiency approaching 70% in the single-photon regime. We use a hybrid system comprising a gate-defined double quantum dot (DQD) charge qubit in a gallium arsenide/aluminum gallium arsenide heterostructure, coupled to a high-impedance Josephson junction array cavity. We systematically optimize the hybrid architecture to maximize the detection efficiency by leveraging strong charge-photon coupling, tunable DQD tunnel rates, and the frequency tunability of both subsystems. The system efficiency is characterized over a frequency range of 3 to 5.2 gigahertz. Our results establish semiconductor-based cavity-quantum electrodynamics architectures as a scalable and versatile platform for efficient microwave photon detection, opening promising avenues for quantum microwave optics and quantum information technologies.
High-efficiency single-photon detection in the microwave domain is a key enabling technology for various quantum applications. However, the extremely low energy of microwave photons presents a fundamental challenge, preventing direct photon-to-charge conversion as achieved in optical systems using semiconductors. Here, we demonstrate continuous microwave photon detection with an efficiency approaching 70% in the single-photon regime. We use a hybrid system comprising a gate-defined double quantum dot (DQD) charge qubit in a gallium arsenide/aluminum gallium arsenide heterostructure, coupled to a high-impedance Josephson junction array cavity. We systematically optimize the hybrid architecture to maximize the detection efficiency by leveraging strong charge-photon coupling, tunable DQD tunnel rates, and the frequency tunability of both subsystems. The system efficiency is characterized over a frequency range of 3 to 5.2 gigahertz. Our results establish semiconductor-based cavity-quantum electrodynamics architectures as a scalable and versatile platform for efficient microwave photon detection, opening promising avenues for quantum microwave optics and quantum information technologies.
Detectors of microwave photons find applications in different fields ranging from security to cosmology. Due to the intrinsic difficulties related to the detection of vanishingly small energy quanta ℏ ω , significant portions of the microwave electromagnetic spectrum are still uncovered by suitable techniques. No prevailing technology has clearly emerged yet, although different solutions have been tested in different contexts. Here, we focus on semiconductor quantum dots, which feature wide tunability by external gate voltages and scalability for large architectures. We discuss possible pathways for the development of microwave photon detectors based on photon-assisted tunneling in semiconducting double quantum dot circuits. In particular, we consider implementations based on either broadband transmission lines or resonant cavities, and we discuss how developments in charge sensing techniques and hybrid architectures may be beneficial for the development of efficient photon detectors in the microwave range.
Motivated by recent interest in implementing circuit quantum electrodynamics with semiconducting quantum dots, we consider a double quantum dot (DQD) capacitively coupled to a superconducting resonator that is driven by the microwave field of a superconducting transmission line. We analyze the DQD current response using input-output theory and show that the resonator-coupled DQD is a sensitive microwave single photon detector. Using currently available experimental parameters of DQD-resonator coupling and dissipation, including the effects of 1/f1/f1/f charge noise and phonon noise, we determine the parameter regime for which incident photons are completely absorbed and near-unit $\ensuremath{\gtrsim}98$% efficiency can be achieved. We show that this regime can be reached by using very high quality resonators with quality factor $Q\ensuremath{\simeq}{10}^{5}$.
We have realized a hybrid solid-state quantum device in which a single-electron semiconductor double quantum dot is dipole coupled to a superconducting microwave frequency transmission line resonator. The dipolar interaction between the two entities manifests itself via dispersive and dissipative effects observed as frequency shifts and linewidth broadenings of the photonic mode respectively. A Jaynes-Cummings Hamiltonian master equation calculation is used to model the combined system response and allows for determining both the coherence properties of the double quantum dot and its interdot tunnel coupling with high accuracy. The value and uncertainty of the tunnel coupling extracted from the microwave read-out technique are compared to a standard quantum point contact charge detection analysis. The two techniques are found to be consistent with a superior precision for the microwave experiment when tunneling rates approach the resonator eigenfrequency. Decoherence properties of the double dot are further investigated as a function of the number of electrons inside the dots. They are found to be similar in the single-electron and many-electron regimes suggesting that the density of the confinement energy spectrum plays a minor role in the decoherence rate of the system under investigation.