Twisted cylindrical tubes are important model systems for nanostructures, heterostructures, and curved quantum devices. In this work, we investigate the quantum behavior of an electron confined to a twisted cylindrical surface. By first calculating the strain tensor to obtain the induced surface metric, we employ da Costa's formalism to derive the geometry-induced quantum potential. This potential modifies the Schrödinger equation even in the absence of external forces, allowing us to determine the bound states and energy eigenvalues. This was made in the linear and non-linear torsion regime. Furthermore, we analyze two distinct scattering problems: (i) scattering within an infinite cylinder containing a twisted section, and (ii) scattering of a free particle incident upon a finite twisted cylinder. Our goal is to understand how geometry and strain influence the properties of analogous untwisted systems. It turns out that both the linear and non-linear twists yield to a geometric phase into the wave function, while the da Costa potential is kept unchanged. Consequently, the system supports bound states whose energie spectrum is twist independent. For both scattering problems, we find that the transmission probability is insensitive to torsion, whereas it is significantly affected by the particle angular momentum and the cylinder's radius, exhibiting distinct oscillatory behavior. These findings suggest relevant implications for engineering quantum devices based on materials with controlled curvature and twist.
Twisted cylindrical tubes are important model systems for nanostructures, heterostructures, and curved quantum devices. In this work, we investigate the quantum behavior of an electron confined to a twisted cylindrical surface. By first calculating the strain tensor to obtain the induced surface metric, we employ da Costa's formalism to derive the geometry-induced quantum potential. This potential modifies the Schrödinger equation even in the absence of external forces, allowing us to determine the bound states and energy eigenvalues. This was made in the linear and non-linear torsion regime. Furthermore, we analyze two distinct scattering problems: (i) scattering within an infinite cylinder containing a twisted section, and (ii) scattering of a free particle incident upon a finite twisted cylinder. Our goal is to understand how geometry and strain influence the properties of analogous untwisted systems. It turns out that both the linear and non-linear twists yield to a geometric phase into the wave function, while the da Costa potential is kept unchanged. Consequently, the system supports bound states whose energie spectrum is twist independent. For both scattering problems, we find that the transmission probability is insensitive to torsion, whereas it is significantly affected by the particle angular momentum and the cylinder's radius, exhibiting distinct oscillatory behavior. These findings suggest relevant implications for engineering quantum devices based on materials with controlled curvature and twist.
We investigate bound states of a non-relativistic scalar particle in a three-dimensional helically twisted (torsional) geometry, considering both the free case and the presence of external radial interactions. The dynamics is described by the Schrödinger equation on a curved spatial background and, when included, by minimal coupling to a magnetic vector potential incorporating an Aharonov--Bohm flux. After separation of variables, the problem reduces to a one-dimensional radial eigenvalue equation governed by an effective potential that combines torsion-induced Coulomb-like and centrifugal-like structures with magnetic/flux-dependent terms and optional model interactions. Because closed-form analytic solutions are not reliable over the parameter ranges required for systematic scans, we compute spectra and eigenfunctions numerically by formulating the radial equation as a self-adjoint Sturm--Liouville problem and solving it with a finite-difference discretization on a truncated radial domain, with explicit convergence control. We analyze four representative scenarios: (i) no external potential, (ii) Cornell-type confinement, (iii) Kratzer-type interaction, and (iv) the small-oscillation regime around the minimum of a Morse potential. We present systematic trends of the low-lying levels as functions of the torsion parameter, magnetic field, and azimuthal sector, and we show that geometric couplings alone can produce effective confinement even in the absence of an external interaction.
Since electrons in a ballistic regime perceive a carbon nanotube or a graphene layer structure as a continuous medium, we can use the study of the quantum dynamics of one electron constrained to a curve or surface to obtain a qualitative description of the conduction electrons' behavior. The confinement process of a quantum particle to a curve or surface leads us, in the so-called da Costa's approach, to a geometry-induced potential (GIP) in the effective Schr\odinger equation. With these considerations, this work aims to study in detail the consequences of constraining a quantum particle to a helix, catenary, helicoid, or catenoid, exploring the relations between these curves and surfaces using differential geometry. Initially, we use the variational method to estimate the energy of the particle in its ground state, and then, we obtain better approximations with the use of the confluent Heun function through numerical calculations. Thus, we conclude that a quantum particle constrained to an infinite helix has its angular momentum quantized due to the geometry of the curve, while in the cases of the catenary, helicoid, and catenoid the particle can be found either in a single bound state or in excited states which constitute a continuous energy band.
A classical particle under spatial constraints is strictly confined to live on a specific space manifold or path, but this assumption is incompatible with the zero-point fluctuations of a quantum particle. One way to describe quantum mechanics under constraints is the confinement potential approach (CPA). For a non-relativistic particle, the CPA maps the problem onto the solution of a Schrödinger-type equation in an isometrically embedded Riemannian submanifold of Euclidean space while the motion along orthogonal directions are decoupled and spatially confined. This approach respects quantum uncertainty, and one of its key results is the appearance of geometry- and metric-induced potentials that affect the stationary states and the dynamics of the particle. For particles constrained to different spaces, such as structures hosting sharp bents, vertices, wedges, conical apices, tips, or self-intersections, a formalism beyond the CPA is needed. Here, a step towards a CPA extension for irregular spaces is presented. After classifying the possible geometric irregularities concerning the CPA formalism, the presentation is focused on a sharply bent quantum wire modeled as an embedded curve with singular (but absolute integrable) curvature. For a subclass fulfilling the additional requirement that the geometric potential is a distribution of first order, a solution scheme for the confined Schrödinger equation is presented based on singular Sturm-Liouville theory and operator theoretic methods. The analytical considerations and numerical simulations evidence the existence of curvature-induced bound states with non-differentiable wave functions localized around the singular point, with an extension well beyond the singularity. Furthermore, a multitude of scattering states appear that may affect the transport and optical properties of the system.
Geometric confinement is known to modify single-particle dynamics through effective potentials, yet its imprint on the interacting quantum vacuum remains largely unexplored. In this work, we investigate the Maxwell--Klein--Gordon system constrained to curved surfaces and demonstrate that the geometric potential Σgeom(r) acts as a local renormalization environment. We show that extrinsic curvature modifies the scalar loop spectrum, entering the vacuum polarization as a position-dependent mass correction M2(r)→m2+Σgeom(r). This induces a finite, gauge-invariant ``geometry-induced running'' of the electromagnetic response. In the long-wavelength regime (∣Q∣R≪1), we derive a closed-form expression for the relative frequency shift Δω/ω, governed by the overlap between the electric energy density and the geometric potential. Applying this formalism to Gaussian bumps, cylindrical shells, and tori, we identify distinct spectral signatures that distinguish these quantum loop corrections from classical geometric optics. Our results suggest that spatial curvature can serve as a tunable knob for ``vacuum engineering,'' offering measurable shifts in high-Q cavities and plasmonic systems.
The motion of a particle rigidly bounded to a surface is discussed, considering the Schr\"odinger equation of a free particle constrained to move, by the action of an external potential, in an infinitely thin sheet of the ordinary three-dimensional space. Contrary to what seems to be the general belief expressed in the literature, this limiting process gives a perfectly well-defined result, provided that we take some simple precautions in the definition of the potentials and wave functions. It can then be shown that the wave function splits into two parts: the normal part, which contains the infinite energies required by the uncertainty principle, and a tangent part which contains "surface potentials" depending both on the Gaussian and mean curvatures. An immediate consequence of these results is the existence of different quantum mechanical properties for two isometric surfaces, as can be seen from the bound state which appears along the edge of a folded (but not stretched) plane. The fact that this surface potential is not a bending invariant (cannot be expressed as a function of the components of the metric tensor and their derivatives) is also interesting from the more general point of view of the quantum mechanics in curved spaces, since it can never be obtained from the classical Lagrangian of an a priori constrained particle without substantial modifications in the usual quantization procedures. Similar calculations are also presented for the case of a particle bounded to a curve. The properties of the constraining spatial potential, necessary to a meaningful limiting process, are discussed in some detail, and, as expected, the resulting Schr\"odinger equation contains a "linear potential" which is a function of the curvature.
We consider an {\em elastic} helical nanoribbon that can take on various conformations, and study the effect of placing a quantum particle on its curved surface. Using a modified Canham-Helfrich model for the elastic energy, we write down the local elastic potential for the ribbon in terms of its bending rigidity, mean curvature M and Gaussian curvature K. The Schrödinger equation of a particle confined to a {\em rigid} curved surface is found using da Costa's formulation. It has a purely quantum geometric potential which depends on M and K. The Schrödinger equation of a particle on an {\em elastic } curved surface will therefore have a total potential comprising quantum and elastic potentials. We compute M and K for a helical ribbon and derive the total potential which depends on the conformation and is thus geometric in nature. Defining a dimensionless quantity RH, we study the behavior of the total geometric potential as RH is varied. In the absence of an electron, the elastic potential is positive and has a single positive maximum for all conformations. Further, a binormal helical ribbon conformation has the lowest potential, while the normal ribbon has the highest, with those of the intermediate ribbons lying in between these. Intriguingly, when a quantum particle is placed on the elastic ribbon, above a certain critical value of RH, the presence of the quantum geometric potential {\em reverses} this order. But localized states for the particle are not supported. Only above a second critical value of RH, localized states appear for all conformations. The injection of an electron on {\it any} given conformation of the elastic ribbon will induce a conformational transition to the normal ribbon conformation.