Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2510.15784 · IEEE Journal on Selected Areas in Communications

From Active to Battery-Free: Rydberg Atomic Quantum Receivers for Self-Sustained SWIPT-MIMO Networks

Qihao Peng, Qu Luo, Zheng Chu, Neng Ye, Hong Ren, Cunhua Pan, Lixia Xiao, Pei Xiao

Published Jan 1, 2026• 0 citations
arXivHTMLPDF

Abstract

In this paper, we propose a hybrid simultaneous wireless information and power transfer (SWIPT)–enabled multiple-input multiple-output (MIMO) architecture, where the base station (BS) uses a conventional radio-frequency (RF) transmitter for downlink transmission and a Rydberg atomic quantum receiver (RAQR) for receiving uplink signals from Internet of Things (IoT) devices. To fully exploit this integration, we jointly design the transmission scheme and the power-splitting strategy to maximize the weighted sum rate, which leads to a non-convex problem. To address this challenge, we first derive closed-form lower bounds on the uplink achievable rates for maximum ratio combining (MRC) and zero-forcing (ZF), as well as on the downlink rate and harvested energy for maximum ratio transmission (MRT) and ZF precoding. Building upon these bounds, we propose an iterative algorithm relying on the best monomial approximation and geometric programming (GP) to solve the non-convex problem. Finally, simulations validate the tightness of our derived lower bounds and demonstrate the superiority of the proposed algorithm over benchmark schemes. Importantly, by integrating RAQR with SWIPT-enabled MIMO, the BS can reliably detect weak uplink signals from IoT devices powered only by harvested energy, enabling battery-free IoT networks.

DOI
10.1109/jsac.2026.3699582

Related papers

Rydberg Atomic Quantum Receivers for the Multi-User MIMO Uplink

Tierui Gong, Chau Yuen, Chong Meng Samson See +2 more

Rydberg atomic quantum receivers exhibit great potential in assisting classical wireless communications due to their outstanding advantages in detecting radio frequency signals. To realize this potential, we integrate a Rydberg atomic quantum receiver into a classical multi-user multiple-input multiple-output (MIMO) scheme to form a multi-user Rydberg atomic quantum MIMO (RAQ-MIMO) system for the uplink. To study this system, we first construct an equivalent baseband signal model, which facilitates convenient system design, signal processing and optimizations. We then study the ergodic achievable rates under both the maximum ratio combining (MRC) and zero-forcing (ZF) schemes by deriving their tight lower bounds. We next compare the ergodic achievable rates of the RAQ-MIMO and the conventional massive MIMO schemes by offering a closed-form expression for the difference of their ergodic achievable rates, which allows us to directly compare the two systems. Our results show that RAQ-MIMO allows the average transmit power of users to be$>25 \text{d B m}$lower than that of the conventional massive MIMO. Viewed from a different perspective, an extra$\sim 8.8$bits/s/Hz/user rate becomes achievable by ZF RAQ-MIMO.

arXiv:2501.18382•International Conference on Communications•Jun 8, 2025•5 citations

Rydberg Atomic Quantum MIMO Receivers for The Multi-User Uplink

Tierui Gong, Chau Yuen, Chong Meng Samson See +2 more

Rydberg atomic quantum receivers (RAQRs) have emerged as a promising solution for evolving wireless receivers from the classical to the quantum domain. To further unleash their great potential in wireless communications, we propose a flexible architecture for Rydberg atomic quantum multiple-input multiple-output (RAQ-MIMO) receivers in the multi-user uplink. Then the corresponding signal model of the RAQ-MIMO system is constructed by paving the way from quantum physics to classical wireless communications. Explicitly, we outline the associated operating principles and transmission flow. We also validate the linearity of our model and its feasible region. Based on our model, we derive closed-form asymptotic formulas for the ergodic achievable rate (EAR) of both the maximum-ratio combining (MRC) and zero-forcing (ZF) receivers operating in uncorrelated fading channels (UFC) and the correlated fading channels (CFC), as well as in the standard quantum limit (SQL) and photon shot limit (PSL) regimes, respectively. Furthermore, we unveil that the EAR scales logarithmically without bound with the product of effective number $N_{\text{atom}}$ and coherence time $T_2$ of the atomic ensemble in the SQL regime, but exhibits non-monotonic trade-off between the collective atomic enhancement and optical-depth-dependent attenuation in the PSL regime. More particularly, the transmit power of users can be scaled down quadratically with $N_{\text{atom}} τ$, $τ\in \{ T_2, \frac{ {\cal C} (Ω_{\ell}) }{A_p} \}$, but the EAR per user retains fixed, by increasing $N_{\text{atom}}$ while retaining the sensor number $M \propto N_{\text{atom}} τ$ in the SQL regime or $M \propto \exp \big( \frac{N_{\text{atom}} {\bar χ}}{A_p} \big)$ in the PSL regime....

arXiv:2506.01355•Jun 2, 2025•0 citations

Beyond the RF Paradigm: Rydberg Atomic Receivers for Next-Generation IoT

Qihao Peng, Qu Luo, Dongnan Xia +11 more

Next-generation Internet-of-Things (IoT) is evolving toward a ubiquitous, ultra-low-power, and multi-band heterogeneous networking paradigm that seamlessly integrates terrestrial, non-terrestrial, and ambient devices. This vision places unprecedented demands on conventional radio frequency (RF) receivers, whose fundamental bottlenecks in sensitivity, power consumption, coverage, and multi-band operation are rooted in the RF antenna. To tackle these issues, we show that the quantum properties of Rydberg atomic quantum receivers (RAQRs), including ultra-high sensitivity, broad frequency agility, and diverse reception modalities, provide a physically distinct receiver-side path that replaces the conventional antenna-and-low-noise-amplifier chain. Using LoRa, narrowband IoT, and ambient IoT as case studies, this article shows that RAQRs deliver significant gains in weak-uplink, low-power, and battery-free regimes. A stochastic-geometry analysis in cellular and cell-free architectures then maps these device-level gains onto network coverage, where the RAQR retains roughly a 4 dB half-coverage advantage over the RF receiver in sparse deployments at \(λ\sim 10^{-5}~{\mathrm m}^{-2}\), with the gain eroded as device density grows. The open challenges are presented to stand between current RAQR prototypes and deployable IoT infrastructure.

arXiv:2606.01263•May 31, 2026•0 citations

Secure Simultaneous Information and Power Transfer for Downlink Multi-User Massive MIMO

Zahra Goli, S. Mohammad Razavizadeh, Hamed Farhadi +1 more

In this article, downlink secure transmission in simultaneous information and power transfer (SWIPT) system enabled with massive multiple-input multiple-output (MIMO) is studied. A base station (BS) with a large number of antennas transmits energy and information signals to its intended users, but these signals are also received by an active eavesdropper. The users and eavesdropper employ a power splitting technique to simultaneously decode information and harvest energy. Massive MIMO helps the BS to focus energy to the users and prevent information leakage to the eavesdropper. The harvested energy by each user is employed for decoding information and transmitting uplink pilot signals for channel estimation. It is assumed that the active eavesdropper also harvests energy in the downlink and then contributes during the uplink training phase. Achievable secrecy rate is considered as the performance criterion and a closed-form lower bound for it is derived. To provide secure transmission, the achievable secrecy rate is then maximized through an optimization problem with constraints on the minimum harvested energy by the user and the maximum harvested energy by the eavesdropper. Numerical results show the effectiveness of using massive MIMO in providing physical layer security in SWIPT systems and also show that our closed-form expressions for the secrecy rate are accurate.

arXiv:2008.04352•IEEE Access•Jan 1, 2020•7 citations

AN-Aided Transmission Design for Secure MIMO Cognitive Radio Network with SWIPT

Xinyu Da, Lei Ni, Hehao Niu +3 more

In this work, we investigate a joint transmit beamforming and artificial noise (AN) covariance matrix design in a multiple-input multiple-output (MIMO) cognitive radio (CR) downlink network with simultaneous wireless information and power transfer (SWIPT), where the malicious energy receivers (ERs) may decode the desired information and hence can be treated as potential eavesdroppers (Eves). In order to improve the secure performance of the transmission, AN is embedded to the information-bearing signal, which acts as interference to the Eves and provides energy to all receivers. Specifically, this joint design is studied under a practical non-linear energy harvesting (EH) model, our aim is to maximize the secrecy rate at the SR subject to the transmit power budget, EH constraints and quality of service (QoS) requirement. The original problem is not convex and challenging to be solved. To circumvent its intractability, an equivalent reformulation of this secrecy rate maximization (SRM) problem is introduced, wherein the resulting problem is primal decomposable and thus can be handled by alternately solving two convex subproblems. Finally, numerical results are presented to verify the effectiveness of our proposed scheme.

IEICE Transactions on Fundamentals of Electronics Communications and Computer Sciences•Jul 31, 2019•2 citations

Robust Secure Transmit Design in MIMO Channels with Simultaneous Wireless Information and Power Transfer

Shaohang Wang, Baoyun Wang

In this letter, we consider a multiple-input-multiple-output (MIMO) downlink system with simultaneous wireless information and power transfer (SWIPT), where the information sent to the desired receiver (DR) may be wiretapped by the malicious energy harvesting (EH) receivers (potential eavesdroppers). Assuming the channel state information (CSI) of the EH receivers is not perfectly known at the transmitter, we aim to maximize the worst-case secrecy rate by jointly designing the precoding matrix, AN covariance matrix and power splsplitting ratio, under the constraints of total transmit power and harvested energyitting ratio, under the constraints of total transmit power and harvested energy at receivers. The formulated problem is non-convex and semi-infinite, which is hard to tackle. To solve it, we first deal with the non-convexity caused by CSI errors with the aid of the S-Procedure, and then employ the Taylor series approximation techniques to transfer the nonconvex problem into a convex optimization problem. Based on that, we propose an iterative algorithm with proved convergence to solve the original problem. Simulation results are finconvex optimization problem. Based on that, we propose an iterative algorithmally provided to show the effectiveness of our proposed robust transmit design.

IEEE Signal Processing Letters•Aug 13, 2015•58 citations
In this paper, we propose a hybrid simultaneous wireless information and power transfer (SWIPT)–enabled multiple-input multiple-output (MIMO) architecture, where the base station (BS) uses a conventional radio-frequency (RF) transmitter for downlink transmission and a Rydberg atomic quantum receiver (RAQR) for receiving uplink signals from Internet of Things (IoT) devices. To fully exploit this integration, we jointly design the transmission scheme and the power-splitting strategy to maximize the weighted sum rate, which leads to a non-convex problem. To address this challenge, we first derive closed-form lower bounds on the uplink achievable rates for maximum ratio combining (MRC) and zero-forcing (ZF), as well as on the downlink rate and harvested energy for maximum ratio transmission (MRT) and ZF precoding. Building upon these bounds, we propose an iterative algorithm relying on the best monomial approximation and geometric programming (GP) to solve the non-convex problem. Finally, simulations validate the tightness of our derived lower bounds and demonstrate the superiority of the proposed algorithm over benchmark schemes. Importantly, by integrating RAQR with SWIPT-enabled MIMO, the BS can reliably detect weak uplink signals from IoT devices powered only by harvested energy, enabling battery-free IoT networks.
Rydberg atomic quantum receivers exhibit great potential in assisting classical wireless communications due to their outstanding advantages in detecting radio frequency signals. To realize this potential, we integrate a Rydberg atomic quantum receiver into a classical multi-user multiple-input multiple-output (MIMO) scheme to form a multi-user Rydberg atomic quantum MIMO (RAQ-MIMO) system for the uplink. To study this system, we first construct an equivalent baseband signal model, which facilitates convenient system design, signal processing and optimizations. We then study the ergodic achievable rates under both the maximum ratio combining (MRC) and zero-forcing (ZF) schemes by deriving their tight lower bounds. We next compare the ergodic achievable rates of the RAQ-MIMO and the conventional massive MIMO schemes by offering a closed-form expression for the difference of their ergodic achievable rates, which allows us to directly compare the two systems. Our results show that RAQ-MIMO allows the average transmit power of users to be>25d B m>25 \text{d B m}>25d B mlower than that of the conventional massive MIMO. Viewed from a different perspective, an extra∼8.8\sim 8.8∼8.8bits/s/Hz/user rate becomes achievable by ZF RAQ-MIMO.
Rydberg atomic quantum receivers (RAQRs) have emerged as a promising solution for evolving wireless receivers from the classical to the quantum domain. To further unleash their great potential in wireless communications, we propose a flexible architecture for Rydberg atomic quantum multiple-input multiple-output (RAQ-MIMO) receivers in the multi-user uplink. Then the corresponding signal model of the RAQ-MIMO system is constructed by paving the way from quantum physics to classical wireless communications. Explicitly, we outline the associated operating principles and transmission flow. We also validate the linearity of our model and its feasible region. Based on our model, we derive closed-form asymptotic formulas for the ergodic achievable rate (EAR) of both the maximum-ratio combining (MRC) and zero-forcing (ZF) receivers operating in uncorrelated fading channels (UFC) and the correlated fading channels (CFC), as well as in the standard quantum limit (SQL) and photon shot limit (PSL) regimes, respectively. Furthermore, we unveil that the EAR scales logarithmically without bound with the product of effective number NatomN_{\text{atom}}Natom​ and coherence time T2T_2T2​ of the atomic ensemble in the SQL regime, but exhibits non-monotonic trade-off between the collective atomic enhancement and optical-depth-dependent attenuation in the PSL regime. More particularly, the transmit power of users can be scaled down quadratically with NatomτN_{\text{atom}} τNatom​τ, τ∈{T2,C(Ωℓ)Ap}τ\in \{ T_2, \frac{ {\cal C} (Ω_{\ell}) }{A_p} \}τ∈{T2​,Ap​C(Ωℓ​)​}, but the EAR per user retains fixed, by increasing NatomN_{\text{atom}}Natom​ while retaining the sensor number M∝NatomτM \propto N_{\text{atom}} τM∝Natom​τ in the SQL regime or M∝exp⁡(NatomχˉAp)M \propto \exp \big( \frac{N_{\text{atom}} {\bar χ}}{A_p} \big)M∝exp(Ap​Natom​χˉ​​) in the PSL regime....
Next-generation Internet-of-Things (IoT) is evolving toward a ubiquitous, ultra-low-power, and multi-band heterogeneous networking paradigm that seamlessly integrates terrestrial, non-terrestrial, and ambient devices. This vision places unprecedented demands on conventional radio frequency (RF) receivers, whose fundamental bottlenecks in sensitivity, power consumption, coverage, and multi-band operation are rooted in the RF antenna. To tackle these issues, we show that the quantum properties of Rydberg atomic quantum receivers (RAQRs), including ultra-high sensitivity, broad frequency agility, and diverse reception modalities, provide a physically distinct receiver-side path that replaces the conventional antenna-and-low-noise-amplifier chain. Using LoRa, narrowband IoT, and ambient IoT as case studies, this article shows that RAQRs deliver significant gains in weak-uplink, low-power, and battery-free regimes. A stochastic-geometry analysis in cellular and cell-free architectures then maps these device-level gains onto network coverage, where the RAQR retains roughly a 4 dB half-coverage advantage over the RF receiver in sparse deployments at λ∼10−5 m−2λ\sim 10^{-5}~{\mathrm m}^{-2}λ∼10−5 m−2, with the gain eroded as device density grows. The open challenges are presented to stand between current RAQR prototypes and deployable IoT infrastructure.
In this article, downlink secure transmission in simultaneous information and power transfer (SWIPT) system enabled with massive multiple-input multiple-output (MIMO) is studied. A base station (BS) with a large number of antennas transmits energy and information signals to its intended users, but these signals are also received by an active eavesdropper. The users and eavesdropper employ a power splitting technique to simultaneously decode information and harvest energy. Massive MIMO helps the BS to focus energy to the users and prevent information leakage to the eavesdropper. The harvested energy by each user is employed for decoding information and transmitting uplink pilot signals for channel estimation. It is assumed that the active eavesdropper also harvests energy in the downlink and then contributes during the uplink training phase. Achievable secrecy rate is considered as the performance criterion and a closed-form lower bound for it is derived. To provide secure transmission, the achievable secrecy rate is then maximized through an optimization problem with constraints on the minimum harvested energy by the user and the maximum harvested energy by the eavesdropper. Numerical results show the effectiveness of using massive MIMO in providing physical layer security in SWIPT systems and also show that our closed-form expressions for the secrecy rate are accurate.
In this work, we investigate a joint transmit beamforming and artificial noise (AN) covariance matrix design in a multiple-input multiple-output (MIMO) cognitive radio (CR) downlink network with simultaneous wireless information and power transfer (SWIPT), where the malicious energy receivers (ERs) may decode the desired information and hence can be treated as potential eavesdroppers (Eves). In order to improve the secure performance of the transmission, AN is embedded to the information-bearing signal, which acts as interference to the Eves and provides energy to all receivers. Specifically, this joint design is studied under a practical non-linear energy harvesting (EH) model, our aim is to maximize the secrecy rate at the SR subject to the transmit power budget, EH constraints and quality of service (QoS) requirement. The original problem is not convex and challenging to be solved. To circumvent its intractability, an equivalent reformulation of this secrecy rate maximization (SRM) problem is introduced, wherein the resulting problem is primal decomposable and thus can be handled by alternately solving two convex subproblems. Finally, numerical results are presented to verify the effectiveness of our proposed scheme.
In this letter, we consider a multiple-input-multiple-output (MIMO) downlink system with simultaneous wireless information and power transfer (SWIPT), where the information sent to the desired receiver (DR) may be wiretapped by the malicious energy harvesting (EH) receivers (potential eavesdroppers). Assuming the channel state information (CSI) of the EH receivers is not perfectly known at the transmitter, we aim to maximize the worst-case secrecy rate by jointly designing the precoding matrix, AN covariance matrix and power splsplitting ratio, under the constraints of total transmit power and harvested energyitting ratio, under the constraints of total transmit power and harvested energy at receivers. The formulated problem is non-convex and semi-infinite, which is hard to tackle. To solve it, we first deal with the non-convexity caused by CSI errors with the aid of the S-Procedure, and then employ the Taylor series approximation techniques to transfer the nonconvex problem into a convex optimization problem. Based on that, we propose an iterative algorithm with proved convergence to solve the original problem. Simulation results are finconvex optimization problem. Based on that, we propose an iterative algorithmally provided to show the effectiveness of our proposed robust transmit design.