The development of large-scale quantum networks requires not only advances in physical-layer technologies but also a comprehensive protocol stack that integrates communication, control, and resource management across all layers. We present the first such protocol stack, which introduces a Global Entanglement Module (GEM) that maintains a consistent, network-wide view of entanglement resources through distributed synchronization strategies. By enabling real-time adaptive execution of entanglement distribution plans, GEM bridges the gap between static planning and dynamic operation. The stack naturally supports pre-distributed entanglement, purification, and multi-partite state generation, making it applicable to a broad range of quantum networking applications. We design and evaluate multiple adaptive heuristics for real-time execution and show that a lightweight scoring-based strategy consistently achieves the best performance, improving entanglement generation rates by about 20% over a globally optimal but non-adaptive fixed-tree baseline and achieving more than a two-fold improvement relative to recent connectionless approaches. Across all scenarios-including predistribution and fidelity analysis-GEM consistently enables lower latency and robust operation. These results establish a practical pathway toward scalable, adaptive quantum internet systems.
The development of large-scale quantum networks requires not only advances in physical-layer technologies but also a comprehensive protocol stack that integrates communication, control, and resource management across all layers. We present the first such protocol stack, which introduces a Global Entanglement Module (GEM) that maintains a consistent, network-wide view of entanglement resources through distributed synchronization strategies. By enabling real-time adaptive execution of entanglement distribution plans, GEM bridges the gap between static planning and dynamic operation. The stack naturally supports pre-distributed entanglement, purification, and multi-partite state generation, making it applicable to a broad range of quantum networking applications. We design and evaluate multiple adaptive heuristics for real-time execution and show that a lightweight scoring-based strategy consistently achieves the best performance, improving entanglement generation rates by about 20% over a globally optimal but non-adaptive fixed-tree baseline and achieving more than a two-fold improvement relative to recent connectionless approaches. Across all scenarios-including predistribution and fidelity analysis-GEM consistently enables lower latency and robust operation. These results establish a practical pathway toward scalable, adaptive quantum internet systems.
The realization of a large-scale Quantum Internet is a long-term objective of quantum information science, aiming to interconnect quantum devices through the reliable distribution of entanglement across long distances. Unlike classical networks, quantum networks are constrained by decoherence, probabilistic operations, and the no-cloning theorem, which fundamentally alter network design principles. This paper presents a new simulation-driven study of a scalable and resilient Quantum Internet architecture based on adaptive, entanglement-centric networking. A detailed system model is developed, incorporating realistic quantum channel noise, memory decoherence, and repeater-assisted communication. Novel fidelity-aware routing and resource-adaptive entanglement management strategies are evaluated through extensive simulations. Mathematical models, algorithmic pseudocode, and performance analysis demonstrate how adaptive control significantly improves end-to-end fidelity and network throughput under non-ideal conditions. The results provide actionable design insights for future experimental and large-scale quantum networking deployments.
When built, quantum repeater networks will require classical network protocols to control the quantum operations. However, existing work on repeaters has focused on the quantum operations themselves, with less attention paid to the contents, semantics, ordering and reliability of the classical control messages. In this work we define and describe our implementation of the classical control protocols. The state machines and packet sequences for the three protocol layers are presented, and operation confirmed by running the protocols over simulations of the physical network. We also show that proper management of the resources in a bottleneck link allows the aggregate throughput of two end-to-end flows to substantially exceed that of a single flow. Our layered architectural framework will support independent evolution of the separate protocol layers. Networks of quantum repeaters utilize three concepts to execute a distributed algorithm that creates entangled quantum states between nodes that are far apart: a basic entanglement mechanism which depends on the physical implementation, error management (in this work, we study a method known as purification), and finally a quantum state propagation layer (here we implement entanglement swapping, which builds multi-hop connections from single-hop connections). Some researchers are investigating approaches that are substantially different from entanglement swapping [30, 24, 19]. Here we focus on swapping, but the layered architecture approach is broadly applicable, allowing other implementations to replace only a single layer in the protocol stack. Previous work primarily focused on the physical and mathematical tools for building repeaters. Classical information is also needed to enable teleportation and swapping, as many quantum operations are not deterministic, and results of quantum measurements need to be reported to distant partners before further operations can proceed. Also, operations in the middle of the network must be coordinated to route and swap properly. This requires classical messages to make operations robust, but message propagation times penalize performance. Even though this delay is usually included in repeater simulations, prior work has not defined the protocols in detail, especially with respect to how all of the nodes make consistent decisions in a timely fashion. In this work, we introduce a protocol stack for networks of quantum repeaters that considers all the necessary classical messages and which can be easily adapted for different approaches at all three protocol layers. We run simulations of competing flows on a dumbbell topology in order to increase our confidence in the behavior of our network protocols. By adjusting the fidelity thresholds required for entanglement swapping, we show that some configurations boost the aggregate throughput for multiple flows significantly above the maximum for a single flow, taking advantage of resources that would otherwise sit idle. The operation of such complex networks and such delicate tuning of the system without formal protocol definitions would not be possible. Previous work has also concentrated almost exclusively on the dedicated use of a single line or chain of repeaters, delivering Bell pairs only to the two nodes at the ends of the chain. Networks, however, typically have more than two end points, and allow any pair of these end nodes to communicate. More topologically complex networks, with numerous end nodes, are obviously much more scalable than connecting every possible pair of nodes using a dedicated line of repeaters. we investigate how classical multiplexing schemes translate to the domain of quantum repeaters, in order to manage shared resources and active communication flows of data from different stations. We simulate four sharing protocols in a complex network with competing traffic. Circuit switching gives any individual flow the best performance, but makes poor use of the overall network and is inflexible. We use circuit switching as our baseline case to compare time division multiplexing, buffer space multiplexing, and statistical multiplexing, and show that all multiplexing schemes are better than circuit switching. For the particular network simulated, we find that statistical multiplexing outperforms time division multiplexing by 28% and buffer space multiplexing by 13%. We find that all three multiplexing schemes are fair; each flow is penalized a similar percentage of its throughput as the the total number of users in the network increases. Finally, statistical multiplexing requires no network-wide coordination of the use of quantum memory or channels, and is easier to implement than a robust, scalable scheme for the other protocols. Our current results suggest that the best strategy for quantum repeater networks is statistical multiplexing. (This is in fact the quantum analogue of the basis on which the Internet works.) However, our current simulations are done with no degradation of memory over time, using the assumption of quantum error-corrected memory at each repeater; inclusion of decoherence and a finite qubit lifetime remains as future work.
Quantum mechanics shows that if one is able to generate and manipulate entanglement over a distance, one is able to perform certain tasks which are impossible using only classical communication. Classical communication refers to what is used in the Internet of today. A quantum internet would therefore bring new capabilities to our highly connected world. These capabilities both involve (1) the ability to perform tasks with are provably impossible in the current Internet, such as unconditionally secure communication, and (2) the ability to perform certain tasks much more efficient, such as distributed (quantum) computing or extending the baseline of telescopes. To be able to build a quantum internet, two main components are needed: (i) hardware that can store, manipulate and entangle qubits and (ii) a software stack to control the hardware. The core task of both of these is to generate entanglement to be used by applications. In this thesis we focus on the latter, i.e. the development of software and protocols that enable entanglement generation using capable hardware. To enable a certain application, one can certainly, in theory, manually specify each operation the hardware should perform, involving micro-wave pulses, lasers etc. However, in practice this is not feasible, if not to say impossible, due to the complexity of the operations needed, especially in a distributed system such as a quantum network. What is needed is a software stack, which can help with abstracting complexity away in multiple layers. This allows for someone to program a protocol in one layer without knowing all the details of the lower layers. In particular, one can abstract away the hardware details, in order to make higher-layer protocols and applications hardware-agnostic. Therefore, to be able to build a universal, efficient and scalable quantum internet, a software stack is crucial. In chapter 2 we start discussing the networking part of a software stack. Namely, we introduce a network stack for a quantum internet, drawing parallels to the IP/TCP-suite of the classical Internet. We continue with proposing a service and interface of the lowest layer of the network stack: the link layer. The link layer is here responsible for generating entanglement between nodes in a quantum network which are directly connected by a quantum link, i.e. a fiber cable. When developing a protocol or application it is very useful to be able to run it. Both to see if the intended ideas make sense and also to check that the implementation is actually correct. Currently we do not have quantum hardware that exposes a full-fledge API that can be used to execute applications. For this reason, it is very useful to be able to instead simulate the hardware in a way that exposes the same API as the hardware being developed. In chapter 3 we introduce SimulaQron for this exact purpose. Any application of a quantum internet will need entanglement in one way or another. However, entanglement is generally hard to generate and is usually the bottleneck when executing an application. We would therefore like to make use of the generated entanglement in the most optimal way. To be able to do this we need to understand how entanglement can be transformed and distributed in a quantum network. We study the entanglement of a particular class of states called graph states in chapters 4 to 9 and how these states can be transformed in a quantum network.
Quantum communication networks have emerged as a promising solution for secure information exchange using quantum mechanical principles such as entanglement and quantum key distribution (QKD). However, most existing multi-user quantum communication frameworks rely on static protocol execution strategies that continuously perform reconciliation and verification procedures irrespective of real-time communication conditions. Such behaviour increases communication overhead, latency accumulation, and resource consumption under dynamically varying network environments. This paper proposes an adaptive QBERaware protocol orchestration framework for secure and scalable multi-user quantum communication networks. This work continuously monitors Quantum Bit Error Rate (QBER), channel noise, communication delay, and traffic density to dynamically regulate communication execution intensity according to network stability conditions. A lightweight threshold-driven orchestration mechanism is introduced to selectively activate communication and security procedures while preserving transmission integrity. Experimental evaluation demonstrates that this work reduces protocol overhead, improves scalability, minimizes communication latency, and enhances adaptive responsiveness when compared with conventional static execution approaches. This work architecture provides a computationally efficient and adaptive communication management framework suitable for next-generation distributed quantum networking infrastructures.
As quantum networking hardware remains costly and not yet widely accessible, simulation tools are essential for the design and evaluation of quantum network architectures and protocols. However, designing a scalable and computationally efficient quantum network simulator is intrinsically challenging: i) quantum dynamics must be emulated on classical computing platforms while capturing the stateful and non-local nature of entanglement, a quantum resource without any classical networking analog; ii) quantum networking is inherently hybrid, as protocol execution also fundamentally depends on classical signaling. This makes a tight and faithful co-simulation of quantum operations and classical message exchanges a core requirement. In this light, we present Q2NS, a modular and extensible quantum network simulator, built on top of ns-3, designed to seamlessly integrate quantum-network primitives with ns-3's established classical protocol stack. Q2NS adopts a modular architecture that decouples protocol control logic from node- and channel-level operations, enabling rapid prototyping and adaptation across heterogeneous and evolving Quantum Internet scenarios. Q2NS natively supports multiple quantum state representations through a unified interface, allowing interchangeable state-vector, density-matrix, and stabilizer backends. We validate Q2NS through realistic use-case studies and comprehensive benchmarks, demonstrating superior computational efficiency over representative state-of-the-art alternatives, while preserving modeling flexibility. Finally, we provide a dedicated visualization tool that jointly captures physical and entanglement-enabled connectivity and supports entangled-state manipulations, facilitating an intuitive interpretation of entanglement dynamics and protocol behavior. Q2NS offers a flexible, open, and scalable simulation platform for advancing Quantum Internet research.
As quantum networking hardware remains costly and not yet widely accessible, simulation tools are essential for the design and evaluation of quantum network architectures and protocols. However, designing a scalable and computationally efficient quantum network simulator is intrinsically challenging: (i) quantum dynamics must be emulated on classical computing platforms while capturing the stateful and non-local nature of entanglement, a unique quantum resource without any classical networking analog; (ii) moreover, quantum networking is inherently hybrid, as protocol execution also fundamentally depends on classical signaling. This makes a tight and faithful co-simulation of quantum operations and classical message exchanges a core requirement. In this light, we present Q2NS, a modular and extensible quantum network simulator, built on top of ns-3, designed to seamlessly integrate quantum-network primitives with ns-3’s established classical protocol stack. Q2NS adopts a modular architecture that decouples protocol control logic from node- and channel-level operations, enabling rapid prototyping and adaptation across heterogeneous and evolving Quantum Internet scenarios. Q2NS natively supports multiple quantum state representations through a unified plug-in interface, allowing interchangeable state-vector, density-matrix, and stabilizer backends. We validate Q2NS through realistic use-case studies and comprehensive benchmarks, demonstrating superior computational efficiency over representative state-of-the-art alternatives, while preserving modeling flexibility. Finally, we provide a dedicated visualization tool that jointly captures physical and entanglement-enabled connectivity and supports entangled-state manipulations, facilitating an intuitive interpretation of entanglement dynamics and protocol behavior. Overall, Q2NS offers a flexible, open, and scalable simulation platform for advancing Quantum Internet research.