This paper investigates a coupled two-qubits heat engine fueled by generalized measurements of the spin components and using a single heat reservoir as sink. Our model extends the proposal of Yi, Talkner, and Kim [Phys. Rev. E 96, 022108 (2017)2470-004510.1103/PhysRevE.96.022108], where the role of a hot reservoir in a four-stroke cycle was replaced by a quantum measurement apparatus, the other steps being two quantum adiabatic strokes and thermalization with a cold reservoir. We propose a five-stroke cycle, where an ergotropy extracting stroke is introduced following the measurement stroke, and study the effect of measurements of different spin components on the performance of the machine. For measurements along z-z directions, we find two possible occupation distributions that yield an active state and the ergotropic stroke improves the performance of the engine over the four-stroke cycle. Further, the three-stroke engine (without the adiabatic strokes) yields the same performance as the five-stroke engine. For arbitrary working medium and nonselective measurements, we prove that the total work output of a five-stroke engine is equal to the sum of the work outputs of the corresponding four-stroke and three-stroke engines. For measurement directions other than z-z, there may be many possible orderings of the postmeasurement probabilities that yield an active state. However, as we illustrate, for specific cases (e.g., x-x), a definite ordering may be obtained with the projective measurements. Thus we find that the five-stroke engine exploiting ergotropy outperforms both its four-stroke as well as three-stroke counterparts.
This paper investigates a coupled two-qubits heat engine fueled by generalized measurements of the spin components and using a single heat reservoir as sink. Our model extends the proposal of Yi, Talkner, and Kim [Phys. Rev. E 96, 022108 (2017)2470-004510.1103/PhysRevE.96.022108], where the role of a hot reservoir in a four-stroke cycle was replaced by a quantum measurement apparatus, the other steps being two quantum adiabatic strokes and thermalization with a cold reservoir. We propose a five-stroke cycle, where an ergotropy extracting stroke is introduced following the measurement stroke, and study the effect of measurements of different spin components on the performance of the machine. For measurements along z-z directions, we find two possible occupation distributions that yield an active state and the ergotropic stroke improves the performance of the engine over the four-stroke cycle. Further, the three-stroke engine (without the adiabatic strokes) yields the same performance as the five-stroke engine. For arbitrary working medium and nonselective measurements, we prove that the total work output of a five-stroke engine is equal to the sum of the work outputs of the corresponding four-stroke and three-stroke engines. For measurement directions other than z-z, there may be many possible orderings of the postmeasurement probabilities that yield an active state. However, as we illustrate, for specific cases (e.g., x-x), a definite ordering may be obtained with the projective measurements. Thus we find that the five-stroke engine exploiting ergotropy outperforms both its four-stroke as well as three-stroke counterparts.
Quantum heat engines, compared to their classical counterparts, offer many advantages due to quantum effects. The study of different cycle modes contributes to the improvement of heat engine efficiency. In this paper, based on a quantum hybrid heat engine, we compare three cycle modes involving Bell-type quantum weak measurement (without observing the results) and two heat baths at different temperatures, where quantum weak measurements play the role of heat source. Thus, there are two types of heat sources and three processes involving heat absorption or release in our model. In other words, we study a multi-stroke quantum hybrid heat engine. Moreover, we further investigate three types of cycle modes using a working substance composed of a three-particle XXZ spin chain. In the adiabatic stroke, we select three Hamiltonian parameters and vary them adiabatically from their initial to final values, comparing their effects on engine efficiency. In particular, we examine how the ordering of the weak-measurement stroke and the adiabatic stroke influences heat absorption, heat release, and engine efficiency. Additionally, we analyze the impact of the high-temperature bath’s temperature and the weak-measurement strength on the engine efficiency.
Abstract In this work, we introduce a three-stroke quantum engine with a single-qubit working substance whose cycle consists of two strokes arise due to performing two distinct general quantum measurements and it is completed by thermalization through contact with a finite temperature thermal reservoir. It is demonstrated that energy is imported into the engine by first measurement channel and work (useful energy) is extracted from it, in a frictionless isentropic manner, by the second measurement channel. It is particularly shown that the engine is capable to have perfect efficiency. In continuation, we equip the engine cycle with two additional adiabatic strokes. As illustrated, the presence of adiabatic strokes in the cycle provide an improved lower bound for the parametrized efficiency range of the engine.
We consider measurement based single temperature quantum heat engine without feedback control, introduced recently by Yi, Talkner and Kim [Phys. Rev. E 96, 022108 (2017)]. Taking the working medium of the engine to be a one-dimensional Heisenberg model of two spins, we calculate the efficiency of the engine undergoing a cyclic process. Starting with two spin-1/2 particles, we investigate the scenario of higher spins also. We show that, for this model of coupled working medium, efficiency can be higher than that of an uncoupled one. However, the relationship between the coupling constant and the efficiency of the engine is rather involved. We find that in the higher spin scenario efficiency can sometimes be negative (this means work has to be done to run the engine cycle) for certain range of coupling constants, in contrast to the aforesaid work of Yi, Talkner and Kim, where they showed that the extracted work is always positive in the absence of coupling. We provide arguments for this negative efficiency in higher spin scenarios. Interestingly, this happens only in the asymmetric scenarios, where the two spins are different. Given these facts, for judiciously chosen conditions, an engine with coupled working medium gives advantage for the efficiency over the uncoupled one.
Measurement-based quantum heat engines have attracted significant interest as alternatives to conventional thermal engines, as they replace the hot thermal reservoir with quantum measurements, thereby offering greater controllability and simpler implementation. Motivated by these advantages, we investigate a measurement-driven quantum Otto engine with a qubit working substance and study the optimal work extractable from such engines, including whether their performance can surpass that of conventional quantum Otto cycles. We analyze the engine in both the infinite-time (adiabatic) and finite-time (non-adiabatic) regimes, considering two distinct implementations obtained through optimization over all projection-valued measurements (PVMs) and over all two-outcome positive operator-valued measurements (POVMs). We show that measurement-based engines can outperform conventional quantum Otto engines within specific parameter regimes and that POVM-based engines can yield higher optimal work extraction than PVM-based ones. Furthermore, by incorporating the thermodynamic cost associated with resetting the auxiliary system required for POVM implementation, we demonstrate that the resulting net work output can still exceed that of PVM-based engines under suitable conditions on the spectral gaps and cold bath temperature. We also identify regimes in which non-adiabatic implementations can yield higher work output and efficiency than their adiabatic counterparts. Our study provides operational guidelines for designing improved measurement-driven quantum Otto engines.
We study the work fluctuations in ergotropic heat engines, namely two-stroke quantum Otto engines where the work stroke is designed to extract the ergotropy (the maximum amount of work by a cyclic unitary evolution) from a couple of quantum systems at canonical equilibrium at two different temperatures, whereas the heat stroke thermalizes back the systems to their respective reservoirs. We provide an exhaustive study for the case of two qutrits whose energy levels are equally spaced at two different frequencies by deriving the complete work statistics. By varying the values of temperatures and frequencies, only three kinds of optimal unitary strokes are found: the swap operator U1, an idle swap U2 (where one of the qutrits is regarded as an effective qubit), and a non-trivial permutation of energy eigenstates U3, which indeed corresponds to the composition of the two previous unitaries, namely U3=U2U1. While U1 and U2 are Hermitian (and hence involutions), U3 is not. This point has an impact on the thermodynamic uncertainty relations (TURs), which bound the signal-to-noise ratio of the extracted work in terms of the entropy production. In fact, we show that all TURs derived from a strong detailed fluctuation theorem are violated by the transformation U3.
Thermodynamic Performance of a Measurement-Driven Quantum Engine with a Two-Parameter (p,q)-Deformed Harmonic Oscillator
We address a measurement-driven, single-bath quantum engine that generates usable work using quantum measurement backaction. The working medium is a two-parameter (p,q)-deformed harmonic oscillator, whose nonlinear spectrum modifies the energy gaps sampled by a nonselective Gaussian measurement and the work exchanged during quasistatic adiabatic strokes. The cycle starts from a Gibbs state and consists of an adiabatic change of (ω,p,q), measurement of the final effective position quadrature, a reverse adiabatic stroke, and thermalization with the original bath. Using a consistent first-law convention, we derive the measurement heat, adiabatic work contributions, thermalization heat, and reduced working-medium efficiency. We also express the measurement stroke via a transition matrix and identify passivity/unitality conditions that ensure nonnegative measurement heat. Numerical scans show that, within the finite-basis, spectral-ordering, and engine-operation checks used in this work, deformation can enhance measurement-induced energy input and extracted work relative to the undeformed oscillator. The physical engine regime is selected by $\QM>0$, $\Wcyc<0$, $\QT<0$, and 0<η<1. The reported efficiency is reduced and excludes measurement-apparatus costs.