Quantum error correction protocols require rapid and repeated qubit measurements. While multiplexed readout in superconducting quantum systems improves efficiency, fast probe pulses introduce spectral broadening, leading to signal leakage into neighboring readout resonators. This crosstalk results in qubit dephasing and degraded readout fidelity. Here, we introduce a pulse-shaping technique inspired by the derivative removal by adiabatic gate protocol to suppress measurement crosstalk during fast readout. By engineering a spectral notch at neighboring resonator frequencies, the method effectively mitigates spurious signal interference. Our approach integrates seamlessly with existing readout architectures, enabling fast, low-crosstalk multiplexed measurements without additional hardware overhead—a critical advancement for scalable quantum computing.
Quantum error correction protocols require rapid and repeated qubit measurements. While multiplexed readout in superconducting quantum systems improves efficiency, fast probe pulses introduce spectral broadening, leading to signal leakage into neighboring readout resonators. This crosstalk results in qubit dephasing and degraded readout fidelity. Here, we introduce a pulse-shaping technique inspired by the derivative removal by adiabatic gate protocol to suppress measurement crosstalk during fast readout. By engineering a spectral notch at neighboring resonator frequencies, the method effectively mitigates spurious signal interference. Our approach integrates seamlessly with existing readout architectures, enabling fast, low-crosstalk multiplexed measurements without additional hardware overhead—a critical advancement for scalable quantum computing.
A fundamental challenge in quantum computing is to increase the number of operations within the qubit coherence time. While this can be achieved by decreasing the gate duration, the use of shorter signals increases their bandwidth and can cause leakage into energetically separated states. A common method to suppress leakage for short pulses is the Derivative Removal by Adiabatic Gate (DRAG) method, which, however, relies on IQ modulation of radio-frequency (RF) signals, thus cannot be applied to the baseband signals, e.g., for semiconductor spin qubits. This paper proposes a novel technique, Delayed Leakage Reduction (DLR), that suppresses leakage at targeted frequencies even for baseband control by using time-delayed repetitions of the control signal to enable rapid, high-fidelity operations. We apply DLR on the adiabatic CZ gate between two spin qubits and achieve fidelities exceeding 99.9% within 9.4 ns for a resonance frequency difference of only 100 MHz. Towards the experimental realization of the proposed control method, we also assess the impact on the fidelity of the sampling rate, noise, and signal quantization of the electronic hardware generating the control pulse, thus setting the minimum hardware requirements for any experimental demonstration.
Fast, high-fidelity readout of qubits is crucial in quantum computing. Quantum error correction in particular requires the repeated measurement of subsets of qubits without perturbing any others. Achieving this goal in a multiplexed readout architecture has been challenging, mainly due to the crosstalk of readout signals. In this work, individual Purcell filters are used for each readout resonator to protect the qubits from untargeted readout signals, and from radiative decay. By implementing this scheme, which could find broad use in near-term multiqubit devices, the authors demonstrate the $s\phantom{\rule{0}{0ex}}i\phantom{\rule{0}{0ex}}m\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}l\phantom{\rule{0}{0ex}}t\phantom{\rule{0}{0ex}}a\phantom{\rule{0}{0ex}}n\phantom{\rule{0}{0ex}}e\phantom{\rule{0}{0ex}}o\phantom{\rule{0}{0ex}}u\phantom{\rule{0}{0ex}}s$ readout of up to five qubits.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.
Measurement of qubits plays a key role in quantum computation. In superconducting multiqubit quantum processors, a multiplexed readout scheme is widely used. In such a scheme, measurement of a qubit state may be influenced by the state of neighboring qubits, due to various crosstalk effects, which will degrade the readout fidelity. To reduce the impact of crosstalk, we model the digital signal processing system used in measurements as a shallow neural network and train it to become a state discriminator. Applying our method to a six-qubit superconducting quantum chip, we see an overall improved readout performance compared with a contemporary qubit-state discriminator. The readout crosstalk is decreased by more than $80\mathrm{%}$. The training and optimization process of the neural network consumes only about 10 s.
Fast, high-fidelity, and low back-action readout plays a crucial role in the advancement of quantum error correction (QEC). Here, we demonstrate high-performance multiplexed readout of superconducting qubits using a tunable broadband Purcell filter, effectively resolving the fundamental trade-off between measurement speed and photon-noise-induced dephasing. By dynamically tuning the filter parameters, we suppress photon-noise-induced dephasing by a factor of 7 in idle status, while enabling rapid, high-fidelity readout in measurement status. We achieve 99.6\% single-shot readout fidelity with 100~ns readout pulse, limited primarily by relaxation errors during readout. Using a multilevel readout protocol, we further attain 99.9\% fidelity in 50~ns. Simultaneous readout of three qubits using 100~ns pulses achieves an average fidelity of 99.5\% with low crosstalk. Additionally, the readout exhibits high quantum-nondemolition (QND) performance: 99.4\% fidelity over repeated measurements and a low leakage rate below 0.1\%. Building on the tunable broadband filter, we further propose a scalable readout scheme for surface code QEC with enhanced multiplexing capability, offering a promising solution for fast and scalable QEC.
High-fidelity control of superconducting qubits requires carefully shaped microwave pulses to avoid several different kinds of error at once. This article is a pedagogical bridging text aimed at upper-level undergraduate and early graduate students who have completed an introductory quantum mechanics course and a first course in quantum computing or quantum information, but who have not yet encountered the physical implementation of qubit gates. We integrate physical intuition for pulse design, analytical gate-level descriptions, and practical hardware considerations into a single, derivation-driven narrative, with explicit learning objectives. We begin with simple pulse envelopes and their spectral properties, showing how finite bandwidth produces leakage outside the computational subspace. This motivates the derivative removal by adiabatic gate (DRAG) technique, which we derive explicitly using the Magnus expansion, obtaining a clear, order-by-order account of which physical error channel appears at which order and why DRAG's cancellation is necessarily incomplete. We discuss the practical hardware realities of control pulse generation, focusing on arbitrary waveform generators (AWG), local oscillators (LO), and IQ mixing. Finally, we extend the discussion to two-qubit operation via the cross-resonance gate, and interpret how driving the control qubit at the target qubit's transition frequency necessarily produces several unwanted interaction terms alongside the desired one, and how successive generations of pulse-engineering strategies have been designed to suppress them.