Erbium-doped fiber quantum memory for chip-integrated quantum-dot single photons at 980 nm
Nasser Gohari Kamel, Arsalan Mansourzadeh, Ujjwal Gautam, Vinaya K. Kavatamane, Ashutosh Singh, Edith Yeung, David B. Northeast, Paul E. Barclay, Philip J. Poole, Dan Dalacu, Daniel Oblak
The realization of long-distance quantum communication and the envisioned quantum internet relies on coherent hybrid light-matter interfaces connecting quantum light emitters with quantum memory (QM) systems. Unlike probabilistic photon pair sources such as spontaneous parametric down-conversion, deterministic quantum light emitters enable the on-demand production of pure and bright single- and entangled- photons, essential for scalable quantum networks. In this work, we present the first experimental realization of a coherent hybrid light-matter interface between a chip-integrated InAsP/InP nanowire quantum dot (QD) and a solid-state QM based on Er 3+ ions doped in a glass silica fiber (erbium-doped fiber, EDF). The emission spectrum of the InAsP/InP nanowire QD aligns with the absorption bandwidth of the EDF at 980 nm at cryogenic temperatures, allowing efficient interaction between the two systems. To demonstrate this, we present a spectroscopic characterization of the 4 \({I}_{\frac{15}{2}}\leftrightarrow\) 4 \({I}_{\frac{11}{2}}\) optical transition in EDF at 980 nm. Our measurements reveal substantial inhomogeneous broadening of this optical transition and a long spin population lifetime, underscoring EDF’s potential for broadband QM implementation. We implement an 8 GHz bandwidth multimode QM based on the Atomic Frequency Comb protocol, enabling the storage and retrieval of 59 weak coherent pulses. Furthermore, we characterize single-photon emission from an InAsP/InP nanowire QD at 980 nm and demonstrate its deterministic storage and recall in the EDF QM. Notably, this is achieved without spectral tuning of the QD emission, demonstrating its direct compatibility with a solid-state QM.
The realization of long-distance quantum communication and the envisioned quantum internet relies on coherent hybrid light-matter interfaces connecting quantum light emitters with quantum memory (QM) systems. Unlike probabilistic photon pair sources such as spontaneous parametric down-conversion, deterministic quantum light emitters enable the on-demand production of pure and bright single- and entangled- photons, essential for scalable quantum networks. In this work, we present the first experimental realization of a coherent hybrid light-matter interface between a chip-integrated InAsP/InP nanowire quantum dot (QD) and a solid-state QM based on Er 3+ ions doped in a glass silica fiber (erbium-doped fiber, EDF). The emission spectrum of the InAsP/InP nanowire QD aligns with the absorption bandwidth of the EDF at 980 nm at cryogenic temperatures, allowing efficient interaction between the two systems. To demonstrate this, we present a spectroscopic characterization of the 4 ({I}{\frac{15}{2}}\leftrightarrow) 4 ({I}{\frac{11}{2}}) optical transition in EDF at 980 nm. Our measurements reveal substantial inhomogeneous broadening of this optical transition and a long spin population lifetime, underscoring EDF’s potential for broadband QM implementation. We implement an 8 GHz bandwidth multimode QM based on the Atomic Frequency Comb protocol, enabling the storage and retrieval of 59 weak coherent pulses. Furthermore, we characterize single-photon emission from an InAsP/InP nanowire QD at 980 nm and demonstrate its deterministic storage and recall in the EDF QM. Notably, this is achieved without spectral tuning of the QD emission, demonstrating its direct compatibility with a solid-state QM.
Quantum memories can substantially increase the efficiency of long-distance communications by synchronizing entanglement swapping operations in quantum repeater nodes. To build a quantum memory, electromagnetically induced transparency (EIT) in atomic vapors can be exploited to coherently store light pulses even at room temperatures. As a quantum source of light, semiconductor quantum dots (QD) offer bright on-demand single photons with high purity.4 Interfacing QDs with atomic vapors has been shown by “slow light” but a quantum memory for QDs is yet to be demonstrated. In this work, we develop an EIT quantum memory hosted in warm cesium vapor. Storage of faint coherent light pulses on the single photon level shows high storage efficiency. A measured bandwidth in the order of 200 MHz makes the memory compatible with the Fourier-limited emission of QDs embedded in micropillar cavities. We show the first attempts to interface the emission from a QD-micropillar with our quantum memory by finetuning the emission wavelength of the emitters to one of the hyperfine transitions in Cs, where the EIT memory takes place. This work sets the base for a hybrid quantum memory based on atomic ensembles for an on-demand semiconductor single-photon source.
This thesis presents on-chip quantum storage of telecommunication wavelength light using nanophotonic resonators coupled to erbium ions. Storage of light in an optical quantum memory has applications in quantum information and quantum communication. For example, long distance quantum communication using quantum repeater protocols is enabled by quantum memories. Efficient and broadband quantum memories can be made from resonators coupled to ensembles of atoms. Like other rare earth ions, erbium is appealing for quantum applications due to its long optical and hyperfine coherence times in the solid state at low temperatures. However, erbium is unique among rare earth ions in having an optical transition in the telecommunication C band (1540 nm), making it particularly appealing for quantum communication applications. In this work, we use nano-scale resonators coupled to erbium-167 ions in yttrium orthosilicate crystals (167Er 3+:Y2SiO5). We demonstrate quantum storage in two types of resonators. In a nanobeam photonic crystal resonator milled directly in 167Er 3+:Y2SiO5, we show storage of weak coherent states using the atomic frequency comb protocol. The storage fidelity for single photon states is estimated to be at least 93.7% ± 2.4% using decoy state analysis, Storage of up to 10 μs and multimode storage are demonstrated. Using a hybrid amorphous silicon 167Er 3+:Y2SiO5 resonator and on-chip electrodes, we demonstrate a multifunctional memory using the atomic frequency comb protocol with DC Stark shift control. In addition dynamic control of memory time, Stark shift control allows modifications to the frequency and bandwidth of stored light. We show tuning of the output pulse by ± 20 MHz relative to the input pulse, and broadening of the pulse bandwidth by more than a factor of three. The storage efficiency in both devices was limited to < 1%. On the way to these results, we describe 167Er 3+:Y2SiO5 spectroscopy measurements including optical coherence times and hyperfine lifetimes below 1 K, and we estimate the linear DC stark shift along two crystal directions. The design and fabrication of the on-chip resonators is presented. We discuss the limitations to storage time and efficiency, including superhyperfine coupling and resonator parameters, and we outline a path forward for improving the storage efficiency in these types of devices.
The quantum internet is envisioned to enable transformative applications such as distributed quantum computing, quantum-enhanced distributed sensing, precise clock distribution, and secure communication. However, the development of the envisioned quantum internet hinges upon high performance quantum memories (QMs). Rare-earth ions doped in solids are among the promising candidates for realizing QMs due to high multimode storage capability, long coherence time and high storage efficiency. In this work, we demonstrate a practical solid-state memory using Erbium ions (Er3+), operating at telecom wavelengths (1536 nm) compatible with existing fiber-optic infrastructure. We showcase on-demand storage and retrieval of weak coherent pulses for up to 1 ms, the longest storage time using Er\textsuperscript{3+} reported in the literature. Crucially, our storage protocol operates without involving spin-level transitions, simplifying the system design and improving its robustness. We further showcase a temporal and spectral multimode capacity with selective recall capabilities, essential for a scalable quantum repeater architecture.
Advanced applications of quantum information science, such as long-distance quantum communication based on quantum repeaters, require photons to be interfaced with different devices. These devices, such as single photon detectors, quantum memories, quantum signal processors, and linear optical elements, may be integrated on a single chip to enable efficient, robust and scalable implementations. With aim of constructing a quantum repeater, and towards realizing integrated optical quantum memories and signal processors in general, we experimentally develop quantum light-matter interfaces using a cryogenically-cooled rare-earth-ion-doped waveguide, namely thulium-doped lithium niobate (Tm3+:LiNbO3). As the basis for our work, we describe a quantum repeater architecture that uses spectral multiplexing and quantum memories that operate with a fixed storage time. Our repeater architecture promises efficient operation, is compatible with the properties of cryogenically-cooled rare-earth-ion-doped crystals, and simplifies the demands of quantum memories compared to other architectures. To demonstrate the feasibility of our repeater design, we utilize our light-matter interface as a quantum memory to perform several experimental demonstrations. These include high-fidelity storage and retrieval of 26 spectrally-multiplexed quantum bits encoded into single-photon-level laser pulses, high-fidelity storage and retrieval of single and entangled photons derived from a photon-pair source, and high-visibility two-photon interference between weak laser pulses that are stored in one or two, separate, quantum memories. The unique properties of our light-matter interface allow us to demonstrate additional protocols that further highlight its promise for integrated quantum signal processing. By combining our Tm3+:LiNbO3 waveguide with a LiNbO3 waveguide phase modulator, we demonstrate operations such as sequencing, filtering, interference, and compression of laser pulses attenuated to the single-photon level. In another experiment, we measure the cross-phase modulation between strong pulses, by which we demonstrate photon-photon interactions that point towards non-destructive measurements of quantum bits. Since the performance of all aforementioned protocols, and future light-matter applications, hinge on the basic spectroscopic properties of our waveguide, we measure these properties at temperatures as low as 800 millikelvin. Our findings, discussed over several attached publications, usher the development of integrated quantum memories and processors for multi-component optical quantum information applications such as repeaters and networks.
Processing and distributing quantum information using photons through fibre-optic or free-space links are essential for building future quantum networks. The scalability needed for such networks can be achieved by employing photonic quantum states that are multiplexed into time and/or frequency, and light-matter interfaces that are able to store and process such states with large time-bandwidth product and multimode capacities. Despite important progress in developing such devices, the demonstration of these capabilities using non-classical light remains challenging. Here, employing the atomic frequency comb quantum memory protocol in a cryogenically cooled erbium-doped optical fibre, we report the quantum storage of heralded single photons at a telecom-wavelength (1.53 μm) with a time-bandwidth product approaching 800. Furthermore, we demonstrate frequency-multimode storage and memory-based spectral-temporal photon manipulation. Notably, our demonstrations rely on fully integrated quantum technologies operating at telecommunication wavelengths. With improved storage efficiency, our light-matter interface may become a useful tool in future quantum networks.
Abstract Hybrid quantum interfaces that combine the fast, deterministic single-photon emission of semiconductor quantum dots (QDs) with the long-lived quantum memories of atomic vapors represent a promising route towards scalable quantum networks and distributed quantum computing. However, the realization of such interfaces is fundamentally limited by the stringent spectral matching required between the narrow optical transitions of atomic systems and the intrinsically variable emission of QDs. Moreover, achieving bright QD emission requires integration into an efficient light-collecting structure. In this work, we present a systematic investigation of three tuning mechanisms for cavity-enhanced QDs embedded in micropillar cavities: thermal tuning, in situ laser processing, and nitrogen gas deposition. We experimentally evaluated the applicability of each method and characterized their tuning ranges and precisions. All three methods enable reliable and precise wavelength shifts, even for QDs in larger micropillars. These results provide practical strategies for achieving spectral resonance between QD emitters and atomic vapor lines, paving the way for tunable solid-state-atomic hybrid platforms for photon storage, synchronization, and interfacing in hybrid quantum systems.