Characterizing and calibrating physical qubits is essential for maintaining the performance of quantum processors. A key challenge in this process is the presence of crosstalk that complicates the estimation of individual qubit detunings. In this work, we derive optimal strategies for estimating detuning and crosstalk parameters by optimizing Ramsey interference experiments using Fisher information and the Cramer-Rao bound. We compare several calibration protocols, including measurements of a single quadrature at multiple times and of two quadratures at a single time, for a fixed number of total measurements. Our results predict that the latter approach yields the highest precision and robustness in both cases of isolated and coupled qubits. We validate experimentally our approach using a single NV center as well as superconducting transmons. Our approach enables accurate parameter extraction with significantly fewer measurements, resulting in up to a 50% reduction in calibration time while maintaining estimation accuracy.
Characterizing and calibrating physical qubits is essential for maintaining the performance of quantum processors. A key challenge in this process is the presence of crosstalk that complicates the estimation of individual qubit detunings. In this work, we derive optimal strategies for estimating detuning and crosstalk parameters by optimizing Ramsey interference experiments using Fisher information and the Cramer-Rao bound. We compare several calibration protocols, including measurements of a single quadrature at multiple times and of two quadratures at a single time, for a fixed number of total measurements. Our results predict that the latter approach yields the highest precision and robustness in both cases of isolated and coupled qubits. We validate experimentally our approach using a single NV center as well as superconducting transmons. Our approach enables accurate parameter extraction with significantly fewer measurements, resulting in up to a 50% reduction in calibration time while maintaining estimation accuracy.
Superconducting quantum processors comprising flux-tunable data and coupler qubits are a promising platform for quantum computation. However, magnetic flux crosstalk between the flux-control lines and the constituent qubits impedes precision control of qubit frequencies, presenting a challenge to scaling this platform. In order to implement high-fidelity digital and analog quantum operations, one must characterize the flux crosstalk and compensate for it. In this work, we introduce a learning-based calibration protocol and demonstrate its experimental performance by calibrating an array of 16 flux-tunable transmon qubits. To demonstrate the extensibility of our protocol, we simulate the crosstalk matrix learning procedure for larger arrays of transmon qubits. We observe an empirically linear scaling in calibration time with system size while maintaining a median qubit frequency error below 300 kHz.
Abstract Quantum effects like entanglement and coherent amplification can be used to drastically enhance the accuracy of quantum parameter estimation beyond classical limits. However, challenges such as decoherence and time-dependent errors hinder Heisenberg-limited amplification. We introduce Quantum Signal-Processing Phase Estimation algorithms that are robust against these challenges and achieve optimal performance as dictated by the Cramér-Rao bound. These algorithms use quantum signal transformation to decouple interdependent phase parameters into largely orthogonal ones, ensuring that time-dependent errors in one do not compromise the accuracy of learning the other. Combining provably optimal classical estimation with near-optimal quantum circuit design, our approach achieves a standard deviation accuracy of 10−4 radians for estimating unwanted swap angles in superconducting two-qubit experiments, using low-depth ( < 10) circuits. This represents up to two orders of magnitude improvement over existing methods. Theoretically and numerically, we demonstrate the optimality of our algorithm against time-dependent phase errors, observing that the variance of the time-sensitive parameter φ scales faster than the asymptotic Heisenberg scaling in the small-depth regime. Our results are rigorously validated against the quantum Fisher information, confirming our protocol’s ability to achieve unmatched precision for two-qubit gate learning.
Superconducting qubits have achieved exceptional gate fidelities, exceeding the error-correction threshold in recent years. One key ingredient of such improvement is the introduction of tunable couplers to control the qubit-to-qubit coupling through frequency tuning. Moving toward fault-tolerant quantum computation, increasing the number of physical qubits is another step toward effective error correction codes. Under a multiqubit architecture, flux control (Z) lines are crucial in tuning the frequency of the qubits and couplers. However, dense flux lines result in magnetic flux crosstalk, wherein magnetic flux applied to one element inadvertently affects neighboring qubits or couplers. This crosstalk obscures the idle frequency of the qubit when flux bias is applied, which degrades gate performance and calibration accuracy. In this study, we characterize flux crosstalk and suppress it in a multiqubit-coupler chip with multi-Z lines without adding additional readout for couplers. By quantifying the mutual flux-induced frequency shifts of qubits and couplers, we construct a cancellation matrix that enables precise compensation of non-local flux, demonstrating a substantial reduction in Z-line crosstalk from 56.5‰ to 0.13‰, which is close to statistical error. Flux compensation corrects the CZ SWAP measurement, leading to a symmetric map with respect to flux bias. Compared with a crosstalk-free calculated CZ SWAP map, the measured map indicates that our approach provides a near-zero crosstalk for the coupler-transmon system. These results highlight the effectiveness of our approach in enhancing flux crosstalk-free control and supporting its potential for scaling superconducting quantum processors.
As quantum systems expand in size and complexity, manual qubit characterization and gate optimization will be a non-scalable and time-consuming venture. Physical qubits have to be carefully calibrated because quantum processors are very sensitive to the external environment, with control hardware parameters slowly drifting during operation, affecting gate fidelity. Currently, existing calibration techniques require complex and lengthy measurements to independently control the different parameters of each gate and are unscalable to large quantum systems. Therefore, fully automated protocols with the desired functionalities are required to speed up the calibration process. This paper aims to propose single-qubit calibration of superconducting qubits under continuous weak measurements from a real physical experimental settings point of view. We propose a real-time optimal estimator of qubit states, which utilizes weak measurements and Bayesian optimization to find the optimal control pulses for gate design. Our numerical results demonstrate a significant reduction in the calibration process, obtaining a high gate fidelity. Using the proposed estimator we estimated the qubit state with and without measurement noise and the estimation error between the qubit state and the estimator state is less than 0.02. With this setup, we drive an approximated pi pulse with final fidelity of 0.9928. This shows that our proposed strategy is robust against the presence of measurement and environmental noise and can also be applicable for the calibration of many other quantum computation technologies.
Addressing the paramount need for precise calibration in superconducting quantum qubits, especially in frequency control, this study introduces a novel calibration scheme harnessing the principles of Many-Body Localization (MBL). While existing strategies, such as Google's snake algorithm, have targeted optimization of qubit frequency parameters, our MBL-based methodology emerges as a stalwart against noise, notably crosstalk and residual coupling errors, thereby significantly enhancing quantum processor fidelity and stability without necessitating extensive optimization computation. Not only does this approach provide a marked improvement in performance, particularly where specific residue couplings are present, but it also presents a more resource-efficient and cost-effective calibration process. The research delineated herein affords fresh insights into advanced calibration strategies and propels forward the domain of superconducting quantum computation by offering a robust framework for future explorations in minimizing error and optimizing qubit performance.
Scalable quantum information processing requires that modular gate operations can be executed in parallel. The presence of crosstalk decreases the individual addressability, causing erroneous results during simultaneous operations. For superconducting qubits which operate in the microwave regime, electromagnetic isolation is often limited due to design constraints, leading to signal crosstalk that can deteriorate the quality of simultaneous gate operations. Here, we propose and demonstrate a method based on the alternative-current Stark effect for calibrating the microwave signal crosstalk. The method is suitable for processors based on fixed-frequency qubits, which are known for high coherence and simple control. The optimal compensation parameters can be reliably identified from a well-defined interference pattern. We implement the method on an array of seven superconducting qubits and show its effectiveness in removing the majority of crosstalk errors.